Browse
Submit Data
Databases
API
Help

Dataset Information

13 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Bioinspired Soot-Deposited Janus Fabrics for Sustainable Solar Steam Generation with Salt-Rejection.

ABSTRACT: Inspired by lotus leaves, self-floating Janus cotton fabric is successfully fabricated for solar steam generation with salt-rejecting property. The layer-selective soot-deposited fabrics not only act as a solar absorber but also provide the required superhydrophobicity for floating on the water. With a polyester protector, the prepared Janus evaporator exhibits a sustainable evaporation rate of 1.375 kW m^-2 h^-1 and an efficiency of 86.3% under 1 sun (1 kW m^-2) and also performs well under low intensity and inclined radiation. Furthermore, no special apparatus and/or tedious processes are needed for preparing this device. With a cost of less than $1 per m², this flexible Janus absorber is a promising tool for portable solar vapor generator.

SUBMITTER: Gao S

PROVIDER: S-EPMC6686278 | biostudies-literature | 2019 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Bioinspired Soot-Deposited Janus Fabrics for Sustainable Solar Steam Generation with Salt-Rejection.

Gao Shouwei S Dong Xiuli X Huang Jianying J Dong Jianing J Maggio Francesco Di FD Wang Shanchi S Guo Fang F Zhu Tianxue T Chen Zhong Z Lai Yuekun Y

Global challenges (Hoboken, NJ) 20190210 8

Inspired by lotus leaves, self-floating Janus cotton fabric is successfully fabricated for solar steam generation with salt-rejecting property. The layer-selective soot-deposited fabrics not only act as a solar absorber but also provide the required superhydrophobicity for floating on the water. With a polyester protector, the prepared Janus evaporator exhibits a sustainable evaporation rate of 1.375 kW m-2 h-1 and an efficiency of 86.3% under 1 sun (1 kW m-2) an ...[more]

PMID: 31565392

Similar Datasets

Bioinspired fractal electrodes for solar energy storages.

Project description:Solar energy storage is an emerging technology which can promote the solar energy as the primary source of electricity. Recent development of laser scribed graphene electrodes exhibiting a high electrical conductivity have enabled a green technology platform for supercapacitor-based energy storage, resulting in cost-effective, environment-friendly features, and consequent readiness for on-chip integration. Due to the limitation of the ion-accessible active porous surface area, the energy densities of these supercapacitors are restricted below ~3 × 10-3 Whcm-3. In this paper, we demonstrate a new design of biomimetic laser scribed graphene electrodes for solar energy storage, which embraces the structure of Fern leaves characterized by the geometric family of space filling curves of fractals. This new conceptual design removes the limit of the conventional planar supercapacitors by significantly increasing the ratio of active surface area to volume of the new electrodes and reducing the electrolyte ionic path. The attained energy density is thus significantly increased to ~10-1 Whcm-3- more than 30 times higher than that achievable by the planar electrodes with ~95% coulombic efficiency of the solar energy storage. The energy storages with these novel electrodes open the prospects of efficient self-powered and solar-powered wearable, flexible and portable applications.

| S-EPMC5374533 | biostudies-literature

Bioinspired Self-Shaping Clay Composites for Sustainable Development.

Project description:Bioinspired self-shaping is an approach used to transform flat materials into unusual three-dimensional (3D) shapes by tailoring the internal architecture of the flat material. Bioinspiration and bioinspired materials have a high potential for fostering sustainable development, yet are often fashioned out of expensive and synthetic materials. In this work, we use bioinspiration to endow clay with self-shaping properties upon drying. The composites created are based on clay and starch, and the internal architecture is built using celery fibers. The viscosity, shrinkage, and bending of the architected composite monolayers are studied for several compositions by measuring penetration depth and using optical characterization methods. Bilayer structures inspired from plants are then processed using a simple hand layup process to achieve bending, twisting, and combinations of those after drying. By layering a mixture of 32 vol% clay, 25.8 vol% starch, and 42.2 vol% water with 40 wt% embedded aligned celery fibers, it is possible to obtain the desired shape change. The work presented here aims at providing a simple method for teaching the concept of bioinspiration, and for creating new materials using only clay and plant-based ingredients. Rejuvenating clay with endowed self-shaping properties could further expand its use. Furthermore, the materials, methods, and principles presented here are affordable, simple, largely applicable, and could be used for sustainable development in the domain of education as well as materials and structures.

| S-EPMC8788514 | biostudies-literature

Porous Carbon Nanofoam Derived From Pitch as Solar Receiver for Efficient Solar Steam Generation.

Project description:Photothermal-material-assisted solar-steam generation has recently attracted intensive attention due to its superior evaporation rate with high energy conversion efficiency for desalination. In this work, a simple approach for fabrication of porous carbon nanofoam (PCN) is reported, which is prepared by the carbonization of pitch using a combination of CaCO3 and NaCl templates, Meanwhile, NaCl saturated solution acts as a porogen to produce micropores and mesopores as solar receiver for efficient solar steam generation. The as-prepared PCN shows excellent porosity and mesoporous feature with an average pore size of 26.8 nm. It also shows superior light absorption of 88% and better thermal insulation (thermal conductivity 0.993 W m-1 K-1). Based on these characteristics, the as-prepared PCN can be used as a promising solar receiver. Under 1 sun, 2 sun, and 3 sun irradiation, the PCN-based solar receiver shows high energy conversion efficiencies of 88%, 86%, and 84%, respectively. Taking advantage of the abundant, low-cost, and commercial availability of pitch as well as its simple and cost-effective manufacture method, the PCN-based solar receiver may hold great potential for a broad variety of solar-steam generation applications, for instance, fresh water production, power generation, desalination, and so on.

| S-EPMC7175018 | biostudies-literature

A durable monolithic polymer foam for efficient solar steam generation.

Project description:Efficient and cost-effective solar steam generation requires self-floating evaporators which can convert light into heat, prevent unnecessary heat loss and greatly accelerate evaporation without solar concentrators. Currently, the most efficient evaporators (efficiency of ?80% under 1 sun) are invariably built from inorganic materials, which are difficult to mold into monolithic sheets. Here, we present a new polymer which can be easily solution processed into a self-floating monolithic foam. The single-component foam can be used as an evaporator with an efficiency at 1 sun comparable to that of the best graphene-based evaporators. Even at 0.5 sun, the efficiency can reach 80%. Moreover, the foam is mechanically strong, thermally stable to 300 °C and chemically resistant to organic solvents.

| S-EPMC5868306 | biostudies-literature

Three-Dimensional Porous Solar-Driven Interfacial Evaporator for High-Efficiency Steam Generation under Low Solar Flux.

Project description:Solar steam generation is critical for many important solar-thermal applications, but is challenging to achieve under low solar flux due to the large evaporation enthalpy of water. Here, we demonstrate a three-dimensional porous solar-driven interfacial evaporator that can generate 100 °C steam under 1 sun illumination with a record high solar-to-steam conversion efficiency of 48%. The high steam generation efficiency is achieved by localizing solar-thermal heating at the evaporation surface and controlling the water supply onto the porous evaporator through tuning its surface wettability, which prevents overheating of the evaporator and thus minimizes conductive, convective, and radiative heat losses from the evaporator. The design of steam outlet located at the sidewall of the evaporator rather than from the solar absorber surface not only facilitates the collection of generated steam, but also avoids potential blockage of solar radiation by the condensing steam. The high-efficiency solar-driven evaporator has been used to generate hot steam for outdoor removal of paraffin on the wall of oil pipelines, offering a promising solution to mitigate the wax deposition issue in petroleum extraction processes.

| S-EPMC6648668 | biostudies-literature

A reconfigurable and magnetically responsive assembly for dynamic solar steam generation.

Project description:Interfacial solar vapor generation is a promising technique to efficiently get fresh water from seawater or effluent. However, for the traditional static evaporation models, further performance improvement has encountered bottlenecks due to the lack of dynamic management and self-regulation on the evolving water movement and phase change in the evaporation process. Here, a reconfigurable and magnetically responsive evaporator with conic arrays is developed through the controllable and reversible assembly of graphene wrapped Fe3O4 nanoparticles. Different from the traditional structure-rigid evaporation architecture, the deformable and dynamic assemblies could reconfigure themselves both at macroscopic and microscopic scales in response to the variable magnetic field. Thus, the internal water transportation and external vapor diffusion are greatly promoted simultaneously, leading to a 23% higher evaporation rate than that of static counterparts. Further, well-designed hierarchical assembly and dynamic evaporation system can boost the evaporation rate to a record high level of 5.9 kg m-2 h-1. This proof-of-concept work demonstrates a new direction for development of high performance water evaporation system with the ability of dynamic reconfiguration and reassembly.

| S-EPMC9329472 | biostudies-literature

Selective Deposition of Candle Soot on a Cellulose Membrane for Efficient Solar Evaporation.

Project description:Owing to their natural abundance, seawater together with sunlight has a potential to meet the global challenges in terms of water scarcity and energy crisis. Herein, we demonstrate a solar vapor generator composed of an inner flame candle soot (IFCS) deposited on a cellulose filter paper (FP) prepared by a simple two-step process. The resultant IFCS/FP device exhibits a high photothermal conversion ability owing to the broadband solar absorption of the IFCS layer along with the multiple scattering of the incoming sunlight in the porous microstructure of the cellulose FP. Additionally, the low thermal conductivity of the IFCS effectively localizes the photothermally generated heat at the IFCS/FP surface, thereby significantly suppressing the conduction heat losses to the underlying bulk water. Meanwhile, the capillary action of the FP supplies an adequate amount of water to the heated surface for accelerating the evaporation process. Benefitting from the synergistic effect of these characteristics, the IFCS/FP achieves high evaporation rates of ∼1.16 and ∼4.09 kg m-2 h-1 and their corresponding efficiencies of ∼75.1 and 90.9% under one and three sun illumination, respectively. Moreover, the IFCS/FP device presents an excellent longevity owing to the persistent performance over 15 repeated cycles under one and three sun illumination. Hence, the facile fabrication, fine mechanical strength, desalination, and the salt-resistance ability of our IFCS/FP make it a suitable candidate for practical applications.

| S-EPMC8613860 | biostudies-literature

Superphobicity/philicity Janus fabrics with switchable, spontaneous, directional transport ability to water and oil fluids.

Project description:Herein we demonstrate that switchable, spontaneous, directional-transport ability to both water and oil fluids can be created on fabric materials through wet-chemistry coating and successive UV irradiation treatment. When the fabric showed directional transport to a liquid, it prevented liquids of higher surface tension from penetration, but allowed liquids of lower surface tension to permeate, from either side. The directional transport ability can be switched from one fluid to another simply by heating the fabric at an elevated temperature and then re-irradiating the fabric with UV light for required period of time. By attaching liquid drops vertically upwards to a horizontally-laid fabric, we further demonstrated that this novel directional fluid transport was an automatic process driven by surface property alone, irrespective of gravity's effect. This novel fabric may be useful for development of "smart" textiles and functional membranes for various applications.

| S-EPMC3797433 | biostudies-literature

Efficient steam generation by inexpensive narrow gap evaporation device for solar applications.

Project description:Technologies for solar steam generation with high performance can help solving critical societal issues such as water desalination or sterilization, especially in developing countries. Very recently, we have witnessed a rapidly growing interest in the scientific community proposing sunlight absorbers for direct conversion of liquid water into steam. While those solutions can possibly be of interest from the perspective of the involved novel materials, in this study we intend to demonstrate that efficient steam generation by solar source is mainly due to a combination of efficient solar absorption, capillary water feeding and narrow gap evaporation process, which can also be achieved through common materials. To this end, we report both numerical and experimental evidence that advanced nano-structured materials are not strictly necessary for performing sunlight driven water-to-vapor conversion at high efficiency (i.e. ?85%) and relatively low optical concentration (?10 suns). Coherently with the principles of frugal innovation, those results unveil that solar steam generation for desalination or sterilization purposes may be efficiently obtained by a clever selection and assembly of widespread and inexpensive materials.

| S-EPMC5607388 | biostudies-literature

Self-assembly of highly efficient, broadband plasmonic absorbers for solar steam generation.

Project description:The study of ideal absorbers, which can efficiently absorb light over a broad range of wavelengths, is of fundamental importance, as well as critical for many applications from solar steam generation and thermophotovoltaics to light/thermal detectors. As a result of recent advances in plasmonics, plasmonic absorbers have attracted a lot of attention. However, the performance and scalability of these absorbers, predominantly fabricated by the top-down approach, need to be further improved to enable widespread applications. We report a plasmonic absorber which can enable an average measured absorbance of ~99% across the wavelengths from 400 nm to 10 ?m, the most efficient and broadband plasmonic absorber reported to date. The absorber is fabricated through self-assembly of metallic nanoparticles onto a nanoporous template by a one-step deposition process. Because of its efficient light absorption, strong field enhancement, and porous structures, which together enable not only efficient solar absorption but also significant local heating and continuous stream flow, plasmonic absorber-based solar steam generation has over 90% efficiency under solar irradiation of only 4-sun intensity (4 kW m(-2)). The pronounced light absorption effect coupled with the high-throughput self-assembly process could lead toward large-scale manufacturing of other nanophotonic structures and devices.

| S-EPMC4846456 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data