Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Ternary Organic Solar Cells Based on a Wide-Bandgap Polymer with Enhanced Power Conversion Efficiencies.

ABSTRACT: A low-bandgap acceptor (ITIC) was added to a binary system composed of a wide-bandgap polymer (PBT-OTT) and an acceptor (PC71BM) to increase the light harvesting efficiency of the associated organic solar cells (OSCs). A ternary blend OSC with an acceptor ratio of PC71BM:ITIC?=?8:2 was found to exhibit a power conversion efficiency of 8.18%, which is 18% higher than that of the binary OSC without ITIC. This improvement is mainly due to the enhanced light absorption and optimized film morphology that result from ITIC addition. Furthermore, an energy level cascade forms in the blend that ensures efficient charge transfer, and bimolecular and trap-assisted recombination is suppressed. Thus the use of ternary blend systems provides an effective strategy for the development of efficient single-junction OSCs.

SUBMITTER: Hwang H

PROVIDER: S-EPMC6700133 | biostudies-literature | 2019 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Ternary Organic Solar Cells Based on a Wide-Bandgap Polymer with Enhanced Power Conversion Efficiencies.

Hwang Hyeongjin H Sin Dong Hun DH Park Chaneui C Cho Kilwon K

Scientific reports 20190819 1

A low-bandgap acceptor (ITIC) was added to a binary system composed of a wide-bandgap polymer (PBT-OTT) and an acceptor (PC<sub>71</sub>BM) to increase the light harvesting efficiency of the associated organic solar cells (OSCs). A ternary blend OSC with an acceptor ratio of PC<sub>71</sub>BM:ITIC = 8:2 was found to exhibit a power conversion efficiency of 8.18%, which is 18% higher than that of the binary OSC without ITIC. This improvement is mainly due to the enhanced light absorption and opti ...[more]

PMID: 31427610

Similar Datasets

Ternary All-Polymer Solar Cells With 8.5% Power Conversion Efficiency and Excellent Thermal Stability.

Project description:All-polymer solar cells (all-PSCs) composed of polymer donors and acceptors have attracted widespread attention in recent years. However, the broad and efficient photon utilization of polymer:polymer blend films remains challenging. In our previous work, we developed NOE10, a linear oligoethylene oxide (OE) side-chain modified naphthalene diimide (NDI)-based polymer acceptor which exhibited a power conversion efficiency (PCE) of 8.1% when blended with a wide-bandgap polymer donor PBDT-TAZ. Herein, we report a ternary all-PSC strategy of incorporating a state-of-the-art narrow bandgap polymer (PTB7-Th) into the PBDT-TAZ:NOE10 binary system, which enables 8.5% PCEs within a broad ternary polymer ratio. We further demonstrate that, compared to the binary system, the improved photovoltaic performance of ternary all-PSCs benefits from the combined effect of enhanced photon absorption, more efficient charge generation, and balanced charge transport. Meanwhile, similar to the binary system, the ternary all-PSC also shows excellent thermal stability, maintaining 98% initial PCE after aging for 300 h at 65°C. This work demonstrates that the introduction of a narrow-bandgap polymer as a third photoactive component into ternary all-PSCs is an effective strategy to realize highly efficient and stable all-PSCs.

| S-EPMC7212455 | biostudies-literature

High-Performance Polymer Solar Cells Based on a Wide-Bandgap Polymer Containing Pyrrolo[3,4-f]benzotriazole-5,7-dione with a Power Conversion Efficiency of 8.63.

Project description:A novel donor-acceptor type conjugated polymer based on a building block of 4,8-di(thien-2-yl)-6-octyl-2-octyl-5H-pyrrolo[3,4-f]benzotriazole-5,7(6H)-dione (TZBI) as the acceptor unit and 4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo-[1,2-b:4,5-b']dithiophene as the donor unit, named as PTZBIBDT, is developed and used as an electron-donating material in bulk-heterojunction polymer solar cells. The resulting copolymer exhibits a wide bandgap of 1.81 eV along with relatively deep highest occupied molecular orbital energy level of -5.34 eV. Based on the optimized processing conditions, including thermal annealing, and the use of a water/alcohol cathode interlayer, the single-junction polymer solar cell based on PTZBIBDT:PC71BM ([6,6]-phenyl-C71-butyric acid methyl ester) blend film affords a power conversion efficiency of 8.63% with an open-circuit voltage of 0.87 V, a short circuit current of 13.50 mA cm-2, and a fill factor of 73.95%, which is among the highest values reported for wide-bandgap polymers-based single-junction organic solar cells. The morphology studies on the PTZBIBDT:PC71BM blend film indicate that a fibrillar network can be formed and the extent of phase separation can be mani-pulated by thermal annealing. These results indicate that the TZBI unit is a very promising building block for the synthesis of wide-bandgap polymers for high-performance single-junction and tandem (or multijunction) organic solar cells.

| S-EPMC5039964 | biostudies-literature

Phthalimide-Based High Mobility Polymer Semiconductors for Efficient Nonfullerene Solar Cells with Power Conversion Efficiencies over 13.

Project description:Highly efficient nonfullerene polymer solar cells (PSCs) are developed based on two new phthalimide-based polymers phthalimide-difluorobenzothiadiazole (PhI-ffBT) and fluorinated phthalimide-ffBT (ffPhI-ffBT). Compared to all high-performance polymers reported, which are exclusively based on benzo[1,2-b:4,5-b']dithiophene (BDT), both PhI-ffBT and ffPhI-ffBT are BDT-free and feature a D-A1-D-A2 type backbone. Incorporating a second acceptor unit difluorobenzothiadiazole leads to polymers with low-lying highest occupied molecular orbital levels (≈-5.6 eV) and a complementary absorption with the narrow bandgap nonfullerene acceptor IT-4F. Moreover, these BDT-free polymers show substantially higher hole mobilities than BDT-based polymers, which are beneficial to charge transport and extraction in solar cells. The PSCs containing difluorinated phthalimide-based polymer ffPhI-ffBT achieve a substantial PCE of 12.74% and a large V oc of 0.94 V, and the PSCs containing phthalimide-based polymer PhI-ffBT show a further increased PCE of 13.31% with a higher J sc of 19.41 mA cm-2 and a larger fill factor of 0.76. The 13.31% PCE is the highest value except the widely studied BDT-based polymers and is also the highest among all benzothiadiazole-based polymers. The results demonstrate that phthalimides are excellent building blocks for enabling donor polymers with the state-of-the-art performance in nonfullerene PSCs and the BDT is not necessary for constructing such donor polymers.

| S-EPMC6343056 | biostudies-literature

A New Dibenzoquinoxalineimide-Based Wide-Bandgap Polymer Donor for Polymer Solar Cells.

Project description:The molecular design of a wide-bandgap polymer donor is critical to achieve high-performance organic photovoltaic devices. Herein, a new dibenzo-fused quinoxalineimide (BPQI) is successfully synthesized as an electron-deficient building block to construct donor-acceptor (D-A)-type polymers, namely P(BPQI-BDT) and P(BPQI-BDTT), using benzodithiophene and its derivative, which bears different side chains, as the copolymerization units. These two polymers are used as a donor, and the narrow bandgap (2,20-((2Z,20Z)-((12,13-bis(2-ethylhexyl)-3,9-diundecyl-12,13-dihydro-[1,2,5]thiadiazolo [3,4-e]thieno[2,″30':4',50]thieno[20,30:4,5]pyrrolo[3,2g]thieno[20,30:4,5]thieno[3,2-b]indole-2,10 diyl)bis(methanylylidene))bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile) Y6 is used as an acceptor to fabricate bulk heterojunction polymer solar cell devices. Y6, as a non-fullerene receptor (NFA), has excellent electrochemical and optical properties, as well as a high efficiency of over 18%. The device, based on P(BPQI-BDTT):Y6, showed power conversion efficiencies (PCEs) of 6.31% with a JSC of 17.09 mA cm-2, an open-circuit voltage (VOC) of 0.82 V, and an FF of 44.78%. This study demonstrates that dibenzo-fused quinoxalineimide is a promising building block for developing wide-bandgap polymer donors.

| S-EPMC9460915 | biostudies-literature

A New Wide Bandgap Donor Polymer for Efficient Nonfullerene Organic Solar Cells with a Large Open-Circuit Voltage.

Project description:Significant progress has been made in nonfullerene small molecule acceptors (NF-SMAs) that leads to a consistent increase of power conversion efficiency (PCE) of nonfullerene organic solar cells (NF-OSCs). To achieve better compatibility with high-performance NF-SMAs, the direction of molecular design for donor polymers is toward wide bandgap (WBG), tailored properties, and preferentially ecofriendly processability for device fabrication. Here, a weak acceptor unit, methyl 2,5-dibromo-4-fluorothiophene-3-carboxylate (FE-T), is synthesized and copolymerized with benzo[1,2-b:4,5-b']dithiophene (BDT) to afford a series of nonhalogenated solvent processable WBG polymers P1-P3 with a distinct side chain on FE-T. The incorporation of FE-T leads to polymers with a deep highest occupied molecular orbital (HOMO) level of -5.60-5.70 eV, a complementary absorption to NF-SMAs, and a planar molecular conformation. When combined with the narrow bandgap acceptor ITIC-Th, the solar cell based on P1 with the shortest methyl chain on FE-T achieves a PCE of 11.39% with a large V oc of 1.01 V and a J sc of 17.89 mA cm-2. Moreover, a PCE of 12.11% is attained for ternary cells based on WBG P1, narrow bandgap PTB7-Th, and acceptor IEICO-4F. These results demonstrate that the new FE-T is a highly promising acceptor unit to construct WBG polymers for efficient NF-OSCs.

| S-EPMC6839623 | biostudies-literature

Approaching 18% efficiency of ternary organic photovoltaics with wide bandgap polymer donor and well compatible Y6 : Y6-1O as acceptor.

Project description:A series of ternary organic photovoltaics (OPVs) are fabricated with one wide bandgap polymer D18-Cl as donor, and well compatible Y6 and Y6-1O as acceptor. The open-circuit-voltage (VOC ) of ternary OPVs is monotonously increased along with the incorporation of Y6-1O, indicating that the alloy state should be formed between Y6 and Y6-1O due to their excellent compatibility. The energy loss can be minimized by incorporating Y6-1O, leading to the VOC improvement of ternary OPVs. By finely adjusting the Y6-1O content, a power conversion efficiency of 17.91% is achieved in the optimal ternary OPVs with 30 wt% Y6-1O in acceptors, resulting from synchronously improved short-circuit-current density (JSC ) of 25.87 mA cm-2, fill factor (FF) of 76.92% and VOC of 0.900 V in comparison with those of D18-Cl : Y6 binary OPVs. The JSC and FF improvement of ternary OPVs should be ascribed to comprehensively optimal photon harvesting, exciton dissociation and charge transport in ternary active layers. The more efficient charge separation and transport process in ternary active layers can be confirmed by the magneto-photocurrent and impedance spectroscopy experimental results, respectively. This work provides new insight into constructing highly efficient ternary OPVs with well compatible Y6 and its derivative as acceptor.

| S-EPMC8363335 | biostudies-literature

A polymer tandem solar cell with 10.6% power conversion efficiency.

Project description:An effective way to improve polymer solar cell efficiency is to use a tandem structure, as a broader part of the spectrum of solar radiation is used and the thermalization loss of photon energy is minimized. In the past, the lack of high-performance low-bandgap polymers was the major limiting factor for achieving high-performance tandem solar cell. Here we report the development of a high-performance low bandgap polymer (bandgap <1.4 eV), poly[2,7-(5,5-bis-(3,7-dimethyloctyl)-5H-dithieno[3,2-b:2',3'-d]pyran)-alt-4,7-(5,6-difluoro-2,1,3-benzothia diazole)] with a bandgap of 1.38 eV, high mobility, deep highest occupied molecular orbital. As a result, a single-junction device shows high external quantum efficiency of >60% and spectral response that extends to 900 nm, with a power conversion efficiency of 7.9%. The polymer enables a solution processed tandem solar cell with certified 10.6% power conversion efficiency under standard reporting conditions (25 °C, 1,000 Wm(-2), IEC 60904-3 global), which is the first certified polymer solar cell efficiency over 10%.

| S-EPMC3660643 | biostudies-literature

Comparison Study of Wide Bandgap Polymer (PBDB-T) and Narrow Bandgap Polymer (PBDTTT-EFT) as Donor for Perylene Diimide Based Polymer Solar Cells.

Project description:Perylene diimide (PDI) derivatives as a kind of promising non-fullerene-based acceptor (NFA) have got rapid development. However, most of the relevant developmental work has focused on synthesizing novel PDI-based structures, and few paid attentions to the selection of the polymer donor in PDI-based solar cells. Wide bandgap polymer (PBDB-T) and narrow bandgap polymer (PBDTTT-EFT) are known as the most efficient polymer donors in polymer solar cells (PSCs). While PBDB-T is in favor with non-fullerene acceptors achieving power conversion efficiency (PCE) more than 12%, PBDTTT-EFT is one of the best electron donors with fullerene acceptors with PCE up to 10%. Despite the different absorption profiles, the working principle of these benchmark polymer donors with a same electron acceptor, specially PDI-based acceptors, was rarely compared. To this end, we used PBDB-T and PBDTTT-EFT as the electron donors, and 1,1'-bis(2-methoxyethoxyl)-7,7'-(2,5-thienyl) bis-PDI (Bis-PDI-T-EG) as the electron acceptor to fabricate PSCs, and systematically compared their differences in device performance, carrier mobility, recombination mechanism, and film morphology.

| S-EPMC6302911 | biostudies-literature

36% Enhanced Efficiency of Ternary Organic Solar Cells by Doping a NT-Based Polymer as an Electron-Cascade Donor.

Project description:In recent years, ternary organic photovoltaic cells (OPVs) have been dedicated to improving power conversion efficiency (PCE) by broadening optical absorption spectra. Ternary OPVs with different poly[thieno[3,2-b]thiophene-2,5-diyl-alt-4,9-bis(4-(2-decyltetradecyl)thien-2-yl)naphtho[1,2-c:5,6-c']bis[1,2,5]thiadiazole-5,5'-diyl] (PTT-DTNT-DT) doping concentrations were designed and the effect of PTT-DTNT-DT as a complementary electron donor on the performance of OPVs was investigated. The optimized PCE of OPVs was increased from 3.42% to 4.66% by doping 20 wt % PTT-DTNT-DT. The remarkable improvement in the performance of the ternary device is mainly attributed to the sharp increase in the short-circuit current density and fill-factor. The major reasons have been systematically studied from atomic force microscopy, electrochemical impedance spectroscopy, surface energy, space charge limited current and photocurrent behavior. It has been found that the separation of excitons and the transportation of charge are enhanced while light absorption is increased, and the charge recombination also decreases due to the optimization of the cascade energy level and the morphology of the ternary active layer. The results show that it is feasible to improve the performance of ternary OPVs by their complementary absorption.

| S-EPMC6403668 | biostudies-literature

From Straw to Device Interface: Carboxymethyl-Cellulose-Based Modified Interlayer for Enhanced Power Conversion Efficiency of Organic Solar Cells.

Project description:Advanced interface materials made from petrochemical resources have been extensively investigated for organic solar cells (OSCs) over the past decades. These interface materials have demonstrated excellent performances in OSC devices. However, the limited resources, high-cost, and non-ecofriendly nature of petrochemical-based interface materials restrict their commercial applications. Here, a facile and effective approach to prepare cellulose and its derivatives as a cathode interface layer for OSCs with enhanced performance from rice straw of agroforestry residues is demonstrated. By employing this carboxymethyl cellulose sodium (CMC) into OSCs, a highly efficient inverted OSC is constructed, and a power conversion efficiency (PCE) of 12.01% is realized using poly[(2,6-(4,8-bis(5-(2-ethyl-hexyl)-thiophen-2-yl)-benzo[1,2-b:4,5-b'] dithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5',7-bis(2-ethylhexyl)benzo[1',2'-c: 4',5'-c']dithiophene-4,8-dione): 3,9-bis(2-methylene-((3-(1, 1-dicyanomethylene)-6/7-methyl)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d: 2',3'-d']-s-indaceno[1,2-b: 5, 6-b']dithiophene as the active layer, which shows over 9.4% improvement in PCE compared to that of a device without the CMC layer (PCE = 10.98%), especially the enhancement in short-circuit current. The improved current densities and PCEs are attributed to the reduced work function, enhanced absorption, and improved interfacial contact by using CMC and ZnO as co-interface. This approach of fabricating interface materials from biorenewable sources for OSCs is simple, scalable, and cost-effective, representing a promising direction for the development of smart interface and green electronics.

| S-EPMC6974931 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data