Dataset Information

A panoramic continuous compressive beamformer with cuboid microphone arrays.

ABSTRACT: Compressive beamforming is a powerful approach for the direction-of-arrival (DOA) estimation and strength quantification of acoustic sources. The conventional grid-based discrete compressive beamformer suffers from the basis mismatch conundrum. Its result degrades under the situation that sources fall off the grid. The existing continuous compressive beamformer with linear or planar microphone arrays can circumvent the conundrum, but work well only for sources in a local region. Here we develop a panoramic continuous compressive beamformer with cuboid microphone arrays based on an atomic norm minimization (ANM) and a matrix pencil and paring method. To solve the positive semidefinite programming equivalent to the ANM efficiently, we formulate a solving algorithm based on the alternating direction method of multipliers. We also present an iterative reweighted ANM to enhance sparsity and resolution. The beamformer is capable of estimating the DOAs and quantifying the strengths of acoustic sources panoramically and accurately, whether a standard uniform or a sparse cuboid microphone array is utilized.

SUBMITTER: Yang Y

PROVIDER: S-EPMC6700166 | biostudies-literature | 2019 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

A panoramic continuous compressive beamformer with cuboid microphone arrays.

Yang Yang Y Chu Zhigang Z Yang Yong-Xin YX Xu Zhongming Z Zhang Yongxiang Y

Scientific reports 20190819 1

Compressive beamforming is a powerful approach for the direction-of-arrival (DOA) estimation and strength quantification of acoustic sources. The conventional grid-based discrete compressive beamformer suffers from the basis mismatch conundrum. Its result degrades under the situation that sources fall off the grid. The existing continuous compressive beamformer with linear or planar microphone arrays can circumvent the conundrum, but work well only for sources in a local region. Here we develop ...[more]

PMID: 31427626

Similar Datasets

Project description:Beamformers are applied for estimating spatiotemporal characteristics of neuronal sources underlying measured MEG/EEG signals. Several MEG analysis toolboxes include an implementation of a linearly constrained minimum-variance (LCMV) beamformer. However, differences in implementations and in their results complicate the selection and application of beamformers and may hinder their wider adoption in research and clinical use. Additionally, combinations of different MEG sensor types (such as magnetometers and planar gradiometers) and application of preprocessing methods for interference suppression, such as signal space separation (SSS), can affect the results in different ways for different implementations. So far, a systematic evaluation of the different implementations has not been performed. Here, we compared the localization performance of the LCMV beamformer pipelines in four widely used open-source toolboxes (MNE-Python, FieldTrip, DAiSS (SPM12), and Brainstorm) using datasets both with and without SSS interference suppression. We analyzed MEG data that were i) simulated, ii) recorded from a static and moving phantom, and iii) recorded from a healthy volunteer receiving auditory, visual, and somatosensory stimulation. We also investigated the effects of SSS and the combination of the magnetometer and gradiometer signals. We quantified how localization error and point-spread volume vary with the signal-to-noise ratio (SNR) in all four toolboxes. When applied carefully to MEG data with a typical SNR (3-15 ?dB), all four toolboxes localized the sources reliably; however, they differed in their sensitivity to preprocessing parameters. As expected, localizations were highly unreliable at very low SNR, but we found high localization error also at very high SNRs for the first three toolboxes while Brainstorm showed greater robustness but with lower spatial resolution. We also found that the SNR improvement offered by SSS led to more accurate localization.

Project description:Our goal was to identify spatial filtering methods that would improve decoding of continuous arm movements from epidural field potentials as well as demonstrate the use of the epidural signals in a closed-loop brain-machine interface (BMI) system in monkeys.Eleven spatial filtering options were compared offline using field potentials collected from 64-channel high-density epidural arrays in monkeys. Arrays were placed over arm/hand motor cortex in which intracortical microelectrodes had previously been implanted and removed leaving focal cortical damage but no lasting motor deficits. Spatial filters tested included: no filtering, common average referencing (CAR), principle component analysis, and eight novel modifications of the common spatial pattern (CSP) algorithm. The spatial filtering method and decoder combination that performed the best offline was then used online where monkeys controlled cursor velocity using continuous wrist position decoded from epidural field potentials in real time.Optimized CSP methods improved continuous wrist position decoding accuracy by 69% over CAR and by 80% compared to no filtering. Kalman decoders performed better than linear regression decoders and benefitted from including more spatially-filtered signals but not from pre-smoothing the calculated power spectra. Conversely, linear regression decoders required fewer spatially-filtered signals and were improved by pre-smoothing the power values. The 'position-to-velocity' transformation used during online control enabled the animals to generate smooth closed-loop movement trajectories using the somewhat limited position information available in the epidural signals. The monkeys' online performance significantly improved across days of closed-loop training.Most published BMI studies that use electrocorticographic signals to decode continuous limb movements either use no spatial filtering or CAR. This study suggests a substantial improvement in decoding accuracy could be attained by using our new version of the CSP algorithm that extends the traditional CSP method for use with continuous limb movement data.

Dataset Information

A panoramic continuous compressive beamformer with cuboid microphone arrays.

Publications

A panoramic continuous compressive beamformer with cuboid microphone arrays.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets