Normal intervertebral segment rotation of the subaxial cervical spine: An in vivo study of dynamic neck motions.
Ontology highlight
ABSTRACT:
SUBMITTER: Yu Y
PROVIDER: S-EPMC6718920 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The in vivo intervertebral range of motion (ROM) is an important predictor for spinal disorders. While the subaxial cervical spine has been extensively studied, the motion characteristics of the occipito-atlantal (C0-1) and atlanto-axial (C1-2) cervical segments were less reported due to technical difficulties in accurate imaging of these two segments. In this study, we investigated the intervertebral ROMs of the entire cervical spine (C0-T1) during in vivo functional neck motions of asymptomatic human subjects, including maximal flexion-extension, left-right lateral bending, and left-right axial torsion, using previously validated dual fluoroscopic imaging and model registration techniques. During all neck motions, C0-1, similar to C7-T1, was substantially less mobile than other segments and always contributed less than 10% of the cervical rotations. During the axial rotation of the neck, C1-2 contributed 73.2 ± 17.3% of the cervical rotation, but each of other segments contributed less than 10% of the cervical rotation. During both lateral bending and axial torsion neck motions, regardless of primary or coupled motions, the axial torsion ROM of C1-2 was significantly greater than its lateral bending ROM (p < 0.001), whereas the opposite differences were consistently observed at subaxial segments. This study reveals that there are distinct motion patterns at upper and lower cervical segments during in vivo neck motions. The reported data could be useful for the development of new diagnosis methods of cervical pathologies and new surgical techniques that aim to restore normal cervical segmental motion.
| S-EPMC6938025 | biostudies-literature
Project description:Study designGlobal cross-sectional survey.ObjectiveThe aim of this study was to validate the AO Spine Subaxial Cervical Spine Injury Classification by examining the perceived injury severity by surgeon across AO geographical regions and practice experience.Summary of background dataPrevious subaxial cervical spine injury classifications have been limited by subpar interobserver reliability and clinical applicability. In an attempt to create a universally validated scheme with prognostic value, AO Spine established a subaxial cervical spine injury classification involving four elements: injury morphology, facet injury involvement, neurologic status, and case-specific modifiers.MethodsA survey was sent to 272 AO Spine members across all geographic regions and with a variety of practice experience. Respondents graded the severity of each variable of the classification system on a scale from zero (low severity) to 100 (high severity). Primary outcome was to assess differences in perceived injury severity for each injury type over geographic regions and level of practice experience.ResultsA total of 189 responses were received. Overall, the classification system exhibited a hierarchical progression in subtype injury severity scores. Only three subtypes showed a significant difference in injury severity score among geographic regions: F3 (floating lateral mass fracture, P = 0.04), N3 (incomplete spinal cord injury, P = 0.03), and M2 (critical disk herniation, P = 0.04). When stratified by surgeon experience, pairwise comparison showed only two morphological subtypes, B1 (bony posterior tension band injury, P = 0.02) and F2 (unstable facet fracture, P = 0.03), and one neurologic subtype (N3, P = 0.02) exhibited a significant difference in injury severity score.ConclusionThe AO Spine Subaxial Cervical Spine Injury Classification System has shown to be reliable and suitable for proper patient management. The study shows this classification is substantially generalizable by geographic region and surgeon experience, and provides a consistent method of communication among physicians while covering the majority of subaxial cervical spine traumatic injuries.Level of Evidence: 4.
| S-EPMC8057527 | biostudies-literature
Project description:Background Posterior facetectomy or lateral mass resection is often used during cervical dumbbell tumor resection, jeopardizing the stability of cervical spine. The space after resection of one or more lateral masses, if left unfilled might hamper bone fusion and structural support.Purpose There were the aims to obtain the relevant morphometry of the lateral mass of the subaxial cervical spine (C3-C7) and to design a lateral mass prosthesis for the posterior reconstruction of the cervical spine.Methods The computed tomography (CT) scans of healthy volunteers were obtained. RadiAnt DICOM Viewer software (Version 2020.1, Medixant, Poland) was used to measure the parameters of lateral mass, such as height, anteroposterior dimension (APD), mediolateral dimension (MLD), and facet joint angle. According to the parameters, a series of cervical lateral mass prostheses were designed. Cadaver experiment was conducted to demonstrate its feasibility.Results Twenty-three volunteers with an average age of 30.1 ± 7.1 years were enrolled in this study. The height of the lateral mass was 14.1 mm on average. The facet joint angle, APD, and MLD of the lateral mass averaged 40.1 degrees, 11.2 mm, and 12.2 mm, respectively. With these key data, a lateral mass prosthesis consisting of a column and a posterior fixation plate was designed. The column has a 4.0-mm radius, 41-degree surface angle, and adjustable height of 13, 15, or 17 mm. In the cadaver experiment, the column could function as a supporting structure between adjacent facets, and it would not violate the exiting nerve root or the vertebral artery.Conclusion This study provided a detailed morphology of the lateral mass of the subaxial cervical spine. A series of subaxial cervical lateral mass prostheses were designed awaiting further clinical application.
| S-EPMC10226812 | biostudies-literature
Project description:Introduction The cervical spine is a highly mobile segment of the spinal column, liable to a variety of diseases and susceptible to trauma. It is a complex region where many vital structures lie in close proximity. Lateral mass screw fixation has become the method of choice in stabilizing subaxial cervical spine among other posterior cervical fixation techniques whenever the posterior elements are absent or compromised. Objective This study examined cervical specimens of cadavers and cervical computed tomography (CT) scans to minimize as much as possible complications of cervical lateral mass screw placement such as vertebral artery or nerve root injuries, facet joint violations, or inadequate placement. Methods Forty normal cervical CT scans, obtained from the emergency unit as part of the trauma workup, were included in this study plus 10 cervical cadaveric specimens obtained from the Alexandria Neuro-anatomy laboratory. There were three fixed parameters for screw insertion in this study. First, the point of screw insertion was the midpoint of the lateral mass; it was the crossing point between the sagittal and axial planes of the posterior cortex of the lateral mass. Second, the direction of the screw in the craniocaudal plane was 30 degrees cranially to avoid facet joint penetration. Third, the exit point of the screw was located on the ventral cortex of the lateral mass just lateral to the root of the transverse process in the midaxial cut of each lateral mass, to make a sound bicortical fixation without injuring the vertebral artery or the nerve root. The selected screw trajectory in this study was the line drawn between the inlet and exit points. The depth and width of the lateral mass of the cervical vertebrae from C3 to C7 were measured as well as the angle of screw trajectory from the sagittal plane. All these measures were applied on the cadaveric specimens to make sure that no injury to the vertebral artery, nerve root, or facet joint occurred. Results As regards the collected measurements of the lateral mass of all subaxial cervical vertebrae, the study revealed that the average depth of the lateral mass was 12.83 ± 1.28 mm. The average width of the lateral mass was 11.92 ± 0.96 mm. The average divergent angle of bicortical screw insertion without injury to the vertebral artery or the nerve root was 19.51 ± 1.83 degrees. As regard the cadaveric specimens, based on all the collected measurements taken from the CT scans, there was no reported injury to the vertebral arteries or nerve roots or penetration to the facet joints. Conclusion Lateral mass fixation can be applied easily and safely for all levels of subaxial cervical spine from C3 to C6 with the following parameters: (1) the point of entry is the midpoint of the lateral mass; (2) the screw trajectory is directed 30 degrees cranially and 20 degrees laterally; (3) the screw length is 13 to 15 mm.
| S-EPMC3864406 | biostudies-other
Project description:Study Design Literature review. Objective To discuss the evaluation and management of subaxial cervical spine trauma (C3-7). Methods A literature review of the main imaging modalities, classification systems, and nonsurgical and surgical treatment performed. Results Computed tomography and reconstructions allow for accurate radiologic identification of subaxial cervical spine trauma in most cases. Magnetic resonance imaging can be utilized to evaluate the stabilizing discoligamentous complex, the nerves, and the spinal cord. The Subaxial Injury Classification (SLIC) is a new system that aids in injury classification and helps guide the decision-making process of conservative versus surgical treatment. Though promising, the SLIC system requires further validation. When the decision for surgical treatment is made, early decompression (less than 24 hours) has been associated with better neurologic recovery. Surgical treatment should be individualized based on the injury characteristics and surgeon's preferences. Conclusions The current state of subaxial cervical spine trauma is one of great progress. However, many questions remain unanswered. We need to continue to account for the individual patient, surgeon, and hospital circumstances that effect decision making and care.
| S-EPMC3908983 | biostudies-other
Project description:Posterior fusion is a powerful tool to address pathology of the cervical spine, but the decision to fuse at any level should be made with great care. Various methods and constructs for posterior cervical fusion exist, all of which aim to restore the posterior tension band's ability to resist flexion forces. We identified articles regarding posterior fusion of the subaxial cervical spine in MEDLINE, Google Scholar, and PubMed. This article is a narrative review of earlier and current concepts regarding the posterior fusion of the subaxial cervical spine, including wiring, translaminar screws, lateral mass screws, and pedicle screws, weighing the strengths and weakness of the different modalities that the surgeon should bear in mind in creating operative plans individualized to patient pathology.
| S-EPMC7253542 | biostudies-literature
Project description:Study designSystematic review.ObjectiveAnterior-alone surgery has gained wider reception for subaxial cervical spine facets dislocation. Questions remain on its efficacy and safety as a stand-alone entity within the contexts of concurrent facet fractures, unilateral versus bilateral dislocations, anterior open reduction, and old dislocation.MethodsA systematic review was performed with search strategy using translatable MESH terms across MEDLINE, EMBASE, VHL Regional Portal, and CENTRAL databases on patients with subaxial cervical dislocation intervened via anterior-alone approach. Two reviewers independently screened for eligible studies. PRISMA (Preferred Reporting Items for Systematic Review and Meta-Analysis) flow chart was adhered to. Nine retrospective studies were included. Narrative synthesis was performed to determine primary outcomes on spinal fusion and revisions and secondary outcomes on new occurrence or deterioration of neurology and infection rate.ResultsNonunion was not encountered across all contexts. A total of 0.86% of unilateral facet dislocation (1 out of 116) with inadequate reduction due to facet fragments between the facet joints removed its malpositioned plate following fusion. No new neurological deficit was observed. Cases that underwent anterior open reduction did not encounter failure that require subsequent posterior reduction surgery. One study (N = 52) on old dislocation incorporated partial corpectomy in their approach and limited anterior-alone approach to cases with persistent instability.ConclusionsThis systematic review supports the efficacy and success of anterior reduction, fusion, and instrumentation for cervical facet fracture dislocation. It is safe from a neurological standpoint. Revision rate due to concurrent facet fracture is low. Certain patients may require posteriorly based surgery or in specific cases combined anterior and posterior procedures.
| S-EPMC7882821 | biostudies-literature
Project description:The most common reason that adults in the United States see their physician is lower back or neck pain secondary to degenerative disc disease. To date, approaches to treat degenerative disc disease are confined to purely mechanical devices designed to either eliminate or enable flexibility of the diseased motion segment. Tissue engineered intervertebral discs (TE-IVDs) have been proposed as an alternative approach and have shown promise in replacing native IVD in the rodent tail spine. Here we demonstrate the efficacy of our TE-IVDs in the canine cervical spine. TE-IVD components were constructed using adult canine annulus fibrosis and nucleus pulposus cells seeded into collagen and alginate hydrogels, respectively. Seeded gels were formed into a single disc unit using molds designed from the geometry of the canine spine. Skeletally mature beagles underwent discectomy with whole IVD resection at levels between C3/4 and C6/7, and were then divided into two groups that received only discectomy or discectomy followed by implantation of TE-IVD. Stably implanted TE-IVDs demonstrated significant retention of disc height and physiological hydration compared to discectomy control. Both 4-week and 16-week histological assessments demonstrated chondrocytic cells surrounded by proteoglycan-rich matrices in the NP and by fibrocartilaginous matrices in the AF portions of implanted TE-IVDs. Integration into host tissue was confirmed over 16 weeks without any signs of immune reaction. Despite the significant biomechanical demands of the beagle cervical spine, our stably implanted TE-IVDs maintained their position, structure and hydration as well as disc height over 16 weeks in vivo.
| S-EPMC5650136 | biostudies-literature
Project description:ObjectiveThe aim of this study was to measure the movement of the cervical spine in healthy volunteers and patients with cervical spondylosis (CS) and describe the actual motion of the cervical spine using a three-dimensional (3D) CT reconstruction method. The results can enrich current biomechanical data of cervical spine and help to find the differences between the noted two groups.Materials and methods20 healthy volunteers underwent CT examination ranging from the clivus of the occiput (Oc) to the top of first thoracic vertebrae (T1) in a neutral position with left or right maximal axial rotation, while 26 CS patients received the same CT scan procedures in the neutral position with left and right maximum rotation. Subsequently, the three-dimensional images of the occiput and every cervical vertebrae (C1-C7) were reconstructed using medical software. 3 virtual non-collinear markers were placed on the prominent structures of foramen magnum and every cervical vertebrae. Then, the 3D orthogonal spatial coordinates were defined with these anatomical markers to represent the orientation and position of every vertebra. Segmental relative motions were calculated using Cardan angles in the 3D spatial coordinates. Finally, the differences between the two groups were analyzed with statistical software SPSS.ResultsThe cervical spine exhibited complicated 3D movements, which could be adequately described using the three-dimensional CT reconstruction method. Reliability analysis of the 3D CT reconstruction method showed inter-rater ICC of 0.90-0.99 and intra-rater ICC of 0.91-0.98, suggesting very good consistency. Besides, the rotation at the upper cervical spine (Oc-C2) took up at least 60% of the total cervical rotation. The coupled lateral bending movement of the upper cervical spine was opposite to the major motion, while the movement of the lower cervical spine followed the same direction as that of the major motion. Oc to C5 segments were all coupled with the back-extension movement. The relative translations of all adjacent segments in each direction were minimal. CS patients showed a significant decrease in the movement of the C4-C5 segment compared with healthy volunteers.ConclusionThe motion of the cervical spine was complicated and three-dimensional. The CT reconstruction method employed here was good at describing such movement. The 3D CT reconstruction method exhibited high reproducibility when measuring cervical spine movement. CS patients and healthy volunteers showed significant differences in the movement of some segments.
| S-EPMC6467451 | biostudies-literature
Project description:Study Design Biomechanical analysis of lateral mass screw pullout strength. Objective We compare the pullout strength of our bone cement-revised lateral mass screw with the standard lateral mass screw. Methods In cadaveric cervical spines, we simulated lateral mass screw "cutouts" unilaterally from C3 to C7. We salvaged fixation in the cutout side with polymethyl methacrylate (PMMA) or Cortoss cement (Orthovita, Malvern, Pennsylvania, United States), allowed the cement to harden, and then drilled and placed lateral mass screws back into the cement-augmented lateral masses. On the contralateral side, we placed standard lateral mass screws into the native, or normal lateral, masses and then compared pullout strength of the cement-augmented side to the standard lateral mass screw. For pullout testing, each augmentation group was fixed to a servohydraulic load frame and a specially designed pullout fixture was attached to each lateral mass screw head. Results Quick-mix PMMA-salvaged lateral mass screws required greater force to fail when compared with native lateral mass screws. Cortoss cement and PMMA standard-mix cement-augmented screws demonstrated less strength of fixation when compared with control-side lateral mass screws. Attempts at a second round of cement salvage of the same lateral masses led to more variations in load to failure, but quick-mix PMMA again demonstrated greater load to failure when compared with the nonaugmented control lateral mass screws. Conclusion Quick-mix PMMA cement revision equips the spinal surgeon with a much needed salvage option for a failed lateral mass screw in the subaxial cervical spine.
| S-EPMC4303472 | biostudies-other