Browse
Submit Data
Databases
API
Help

Dataset Information

16 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Ethynylation of Formaldehyde over CuO/SiO₂ Catalysts Modified by Mg Species: Effects of the Existential States of Mg Species.

ABSTRACT: The highly effective catalytic synthesis of 1,4-butynediol (BD) from the Reppe process is a fascinating technology in modern chemical industry. In this work, we reported the effects of the existential states of Mg species in the CuO/silica-magnesia catalysts for the ethynylation of formaldehyde in a simulative slurry reactor. The physichemical properties of the supports and the corresponding catalysts were extensively characterized by various techniques. The experimental results indicated that the introduced Mg species in the form of MgO particles, MgO microcrystals, or Si-O-Mg structures effectively resulted in an abundance of medium-strong basic sites, which can synergize with the active Cu⁺ species, facilitate the activation of acetylene, and improve the ethynylation activity. For the CuO/MgO-SiO₂ catalyst, the existence of Si-O-Mg structures strengthened the Cu-support interaction, which were beneficial to improving the dispersion and the valence stability of the active Cu⁺ species. The highly dispersed Cu⁺ species, its stable valence state, and the abundant medium-strong basic sites enhanced the synergistic effect significantly, leading to the superior activity and stability of CuO/MgO-SiO₂. The insights into the role of the existential states of Mg species and the revelation of the synergistic effect between active Cu⁺ species and basic sites can provide theoretic guidance for future rational design of catalysts for the ethynylation reation.

SUBMITTER: Wang Z

PROVIDER: S-EPMC6722991 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Ethynylation of Formaldehyde over Binary Cu-Based Catalysts: Study on Synergistic Effect between Cu+ Species and Acid/Base Sites.

Project description:Most studies on the Cu-based catalysts in the ethynylation of formaldehyde are merely focused on the tuning of electronic configuration and dispersion of the Cu+ species. So far, little attention has been paid to the synergy between Cu species and promoters. Herein, binary nano-CuO-MOx catalysts (M = Si, Al, and Mg) were synthesized and the effects of the promoter on the surface basicity/acidity were systematically studied as well as the ethynylation performance of the nano-CuO-based catalysts. The results show that the introduction of MgO provided a large number of basic sites, which could coordinate with the active Cu+ species and facilitate the dissociation of acetylene as HC ≡ Cδ- and Hδ+. The strongly nucleophilic acetylenic carbon (HC≡Cδ-) is favorable to the attack at the electropositive carbonyl Cδ+ of formaldehyde. The MgO-promoted CuO catalyst showed the highest yield of BD (94%) and the highest stability (the BD yield decreased only from 94% to 82% after eight reaction cycles). SiO2 effectively dispersed Cu species, which improved catalytic activity and stability. However, the introduction of Al2O3 resulted in a large number of acidic sites on the catalyst's surface. This led to the polymerization of acetylene, which covered the active sites and decreased the catalyst's activity.

| S-EPMC6669766 | biostudies-literature

Application of CuxO-FeyOz Nanocatalysts in Ethynylation of Formaldehyde.

Project description:Composite nanomaterials have been widely used in catalysis because of their attractive properties and various functions. Among them, the preparation of composite nanomaterials by redox has attracted much attention. In this work, pure Cu2O was prepared by liquid phase reduction with Cu(NO3)2 as the copper source, NaOH as a precipitator, and sodium ascorbate as the reductant. With Fe(NO3)3 as the iron source and solid-state phase reaction between Fe3+ and Cu2O, CuxO-FeyOz nanocatalysts with different Fe/Cu ratios were prepared. The effects of the Fe/Cu ratio on the structure of CuxO-FeyOz nanocatalysts were studied by means of X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), ultraviolet confocal Raman (Raman), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS, XAES), and hydrogen temperature-programmed reduction (H2-TPR). Furthermore, the structure-activity relationship between the structure of CuxO-FeyOz nanocatalysts and the performance of formaldehyde ethynylation was discussed. The results show that Fe3+ deposited preferentially on the edges and corners of the Cu2O surface, and a redox reaction between Fe3+ and Cu+ occurred, forming CuxO-FeyOz nanoparticles containing Cu+, Cu2+, Fe2+, and Fe3+. With the increase of the Fe/Cu ratio, the content of CuxO-FeyOz increased. When the Fe/Cu ratio reached 0.8, a core-shell structure with Cu2O inside and a CuxO-FeyOz coating on the outside was formed. Because of the large physical surface area and the heterogeneous structure formed by CuxO-FeyOz, the formation of nonactive Cu metal is inhibited, and the most active species of Cu+ are exposed on the surface, showing the best formaldehyde ethynylation activity.

| S-EPMC6781078 | biostudies-literature

Selective Hydrogenation of Dimethyl Oxalate to Methyl Glycolate over Boron-Modified Ag/SiO2 Catalysts.

Project description:The addition of boron (B) as a promoter to the Ag/SiO2 catalyst for the selective hydrogenation of dimethyl oxalate (DMO) to methyl glycolate (MG) was investigated. A comparison of the preparation method for incorporation of B found that the addition during the ammonia evaporation deposition-precipitation synthesis of the Ag/SiO2 catalyst (Ag-B/SiO2) was inferior to incipient wetness impregnation introduction of the Ag/SiO2 catalyst (B/Ag/SiO2). Moreover, the effects of B contents (0.5-5 wt %) on the physicochemical properties and catalytic performance of the B/Ag/SiO2 catalysts were investigated by XRF, N2-physisorption, XRD, FTIR, TEM, EDX mapping, H2-TPR, NH3-TPD, XPS, and catalytic testing. The results indicated that both the catalytic activity and stability of the Ag/SiO2 catalyst were noticeably enhanced after the introduction of B. The B/Ag/SiO2 catalyst with 1 wt % B showed the best catalytic performance of 100% DMO conversion and 88.3% MG selectivity, which could be attributed to the highest dispersion of the active metal and the smallest Ag particle size stabilized by the strong interaction between silver and boron species.

| S-EPMC9670726 | biostudies-literature

The Electrophilicity of Surface Carbon Species in the Redox Reactions of CuO-CeO2 Catalysts.

Project description:Electronic metal-support interactions (EMSI) describe the electron flow between metal sites and a metal oxide support. It is generally used to follow the mechanism of redox reactions. In this study of CuO-CeO2 redox, an additional flow of electrons from metallic Cu to surface carbon species is observed via a combination of operando X-ray absorption spectroscopy, synchrotron X-ray powder diffraction, near ambient pressure near edge X-ray absorption fine structure spectroscopy, and diffuse reflectance infrared Fourier transform spectroscopy. An electronic metal-support-carbon interaction (EMSCI) is proposed to explain the reaction pathway of CO oxidation. The EMSCI provides a complete picture of the mass and electron flow, which will help predict and improve the catalytic performance in the selective activation of CO2 , carbonate, or carbonyl species in C1 chemistry.

| S-EPMC8251948 | biostudies-literature

Highly active Ce, Y, La-modified Cu/SiO2 catalysts for hydrogenation of methyl acetate to ethanol.

Project description:Rare earth element (Ce, Y, and La) modified Cu/SiO2 catalysts via hydrolysis precipitation and impregnation method were fabricated for the vapor-phase hydrogenation of methyl acetate to ethanol. LaO x showed the most pronounced promotion in the catalytic tests. After detailed characterizations, via N2 adsorption-desorption, XRD, N2O chemisorption, FTIR, H2-TPR, H2-TPD, TEM, XPS, and TG/DTA, we found that the addition of promoter LaO x can decrease the particle size while in turn, it can increase the dispersion of copper species. The strong interactions between copper and lanthanum atoms alter the surface chemical states of the copper species. This results in the generation of more Cu+ species and high S Cu + values, which are responsible for the excellent activity and stability during hydrogenation. In addition, the content of additive LaO x and reaction conditions (reaction temperature and LHSV) were optimized. Then, the long-term stability performance was evaluated over the selected catalyst in contrast with Cu/SiO2.

| S-EPMC9049221 | biostudies-literature

Ozone catalytic oxidation of low-concentration formaldehyde over ternary Mn-Ce-Ni oxide catalysts modified with FeOx.

Project description:Manganese oxide-based catalysts have attracted extensive attention due to their relatively low cost and remarkable performance for removing VOCs. In this research, we used the Pechini method to synthesize manganese-cerium-nickel ternary oxide catalysts (MCN) and evaluated the effectiveness of catalytic destruction of formaldehyde (HCHO) and ozone at room temperature. FeOx prepared by the impregnation method was applied to modify the catalyst. After FeOx treatment, the catalyst represented the best performance on both HCHO destruction and ozone decomposition under dry conditions and exhibited excellent water vapor resistance. The as-prepared catalysts were next characterized via H2-temperature programmed reduction (H2-TPR), temperature programmed desorption of O2 (O2-TPD), and X-ray photoelectron spectroscopy (XPS), and the results demonstrated that addition of FeOx increased Mn3+ and Ce3+ concentrations, oxygen vacancies and surface lattice oxygen species, facilitated adsorption, and redox properties. Based on the results of in situ diffuse reflectance infrared Fourier transform spectrometry (DRIFTS), possible mechanisms of ozone catalytic oxidation of HCHO were proposed. Overall, the ternary mixed-oxide catalyst developed in this study holds great promise for HCHO and ozone decomposition in the indoor environment.

| S-EPMC9734528 | biostudies-literature

Synthesis and photoluminescence properties of silica-modified SiO2@ANA-Si-Tb@SiO2, SiO2@ANA-Si-Tb-L@SiO2 core-shell-shell nanostructured composites.

Project description:Three novel core-shell nanostructured composites SiO2@ANA-Si-Tb, SiO2@ANA-Si-Tb-L (L = second ligand) with SiO2 as the core and terbium organic complex as the shell were successfully synthesized. The core and shell were connected together by covalent bonds. The terbium ion was coordinated with organic ligand-forming terbium organic complex in the shell layer. The organosilane (HOOCC5H4NN(CONH(CH2)3Si(OCH2CH3)3)2 (abbreviated as ANA-Si) was used as the first ligand and 1,10-phenanthroline (phen) or 2-thenoyltrifluoroacetone (TTA) was used as the second ligand. Furthermore, silica-modified SiO2@ANA-Si-Tb@SiO2, SiO2@ANA-Si-Tb-L@SiO2 core-shell-shell nanostructured composites were also synthesized by sol-gel chemical route, which involved the hydrolysis and polycondensation processes of tetraethoxysilane (TEOS) using cetyltrimethyl ammonium bromide (CTAB) as a surface-active agent. An amorphous silica shell was coated around the SiO2@ANA-Si-Tb, SiO2@ANA-Si-Tb-L core-shell nanostructured composites. The core-shell and core-shell-shell nanostructured composites exhibited excellent luminescence in the solid state. Meanwhile, an improved luminescent stability property of the core-shell-shell nanostructured composites was observed for the aqueous solution. This type of core-shell-shell nanostructured composites exhibited bright luminescence, high stability and good solubility, which may present potential applications in the fields of optoelectronic devices, bio-imaging, medical diagnosis and study on the structure of function composite materials.

| S-EPMC6731695 | biostudies-literature

Direct conversion of methane to formaldehyde and CO on B2O3 catalysts.

Project description:Direct oxidation of methane to value-added C1 chemicals (e.g. HCHO and CO) provides a promising way to utilize natural gas sources under relatively mild conditions. Such conversions remain, however, a key selectivity challenge, resulting from the facile formation of undesired fully-oxidized CO2. Here we show that B2O3-based catalysts are selective in the direct conversion of methane to HCHO and CO (~94% selectivity with a HCHO/CO ratio of ~1 at 6% conversion) and highly stable (over 100 hour time-on-stream operation) conducted in a fixed-bed reactor (550 °C, 100 kPa, space velocity 4650 mL gcat-1 h-1). Combined catalyst characterization, kinetic studies, and isotopic labeling experiments unveil that molecular O2 bonded to tri-coordinated BO3 centers on B2O3 surfaces acts as a judicious oxidant for methane activation with mitigated CO2 formation, even at high O2/CH4 ratios of the feed. These findings shed light on the great potential of designing innovative catalytic processes for the direct conversion of alkanes to fuels/chemicals.

| S-EPMC7655938 | biostudies-literature

Designing Highly Efficient Cu2O-CuO Heterojunction CO Oxidation Catalysts: The Roles of the Support Type and Cu2O-CuO Interface Effect.

Project description:In this work, a series of Cu2O/S (S = α-MnO2, CeO2, ZSM-5, and Fe2O3) supported catalysts with a Cu2O loading amount of 15% were prepared by the facile liquid-phase reduction deposition-precipitation strategy and investigated as CO oxidation catalysts. It was found that the Cu2O/α-MnO2 catalyst exhibits the best catalytic activity for CO oxidation. Additionally, a series of Cu2O-CuO/α-MnO2 heterojunctions with varied proportion of Cu+/Cu2+ were synthesized by further calcining the pristine Cu2O/α-MnO2 catalyst. The ratio of the Cu+/Cu2+ could be facilely regulated by controlling the calcination temperature. It is worth noting that the Cu2O-CuO/α-MnO2-260 catalyst displays the best catalytic performance. Moreover, the kinetic studies manifest that the apparent activation energy could be greatly reduced owing to the excellent redox property and the Cu2O-CuO interface effect. Therefore, the Cu2O-CuO heterojunction catalysts supported on α-MnO2 nanotubes are believed to be the potential catalyst candidates for CO oxidation with advanced performance.

| S-EPMC9457833 | biostudies-literature

Depolymerization of Pine Wood Organosolv Lignin in Ethanol Medium over NiCu/SiO2 and NiCuMo/SiO2 Catalysts: Impact of Temperature and Catalyst Composition.

Project description:The process of thermocatalytic conversion of pine ethanol lignin in supercritical ethanol was studied over NiCu/SiO2 and NiCuMo/SiO2 catalysts bearing 8.8 and 11.7 wt.% of Mo. The structure and composition of ethanol lignin and the products of its thermocatalytic conversion were characterized via 2D-HSQC NMR spectroscopy, GC-MC. The main aromatic monomers among the liquid products of ethanol lignin conversion were alkyl derivatives of guaiacol (propyl guaiacol, ethyl guaiacol and methyl guaiacol). The total of the monomers yield in this case was 12.1 wt.%. The temperature elevation up to 350 °C led to a slight decrease in the yield (to 11.8 wt.%) and a change in the composition of monomeric compounds. Alkyl derivatives of pyrocatechol, phenol and benzene were observed to form due to deoxygenation processes. The ratio of the yields of these compounds depended on the catalyst, namely, on the content of Mo in the catalyst composition. Thus, the distribution of monomeric compounds used in various industries can be controlled by varying the catalyst composition and the process conditions.

| S-EPMC10747262 | biostudies-literature