Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Sn-Based Perovskite for Highly Sensitive Photodetectors.

ABSTRACT: Organic-inorganic hybrid perovskites have emerged as promising functional materials for high-performance photodetectors. However, the toxicity of Pb and the lack of internal gain mechanism in typical perovskites significantly hinder their practical applications. Herein, a low-voltage and high-performance photodetector based on a single layer of lead-free Sn-based perovskite film is reported. The device shows broadband response from ultraviolet to near-infrared light with a responsivity up to 105 A W-1 and a high gain at a low operating voltage. The outstanding performance is attributed to the high hole mobility, p-doping nature, and excellent optoelectronic properties of the Sn-based perovskite. Moreover, the device is assembled on a flexible substrate and demonstrates both high sensitivity and good bending stability. This work demonstrates a route for realizing nontoxic, low-cost, and high-performance perovskite photodetectors with a simple device structure.

SUBMITTER: Liu CK

PROVIDER: S-EPMC6724360 | biostudies-literature | 2019 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Sn-Based Perovskite for Highly Sensitive Photodetectors.

Liu Chun-Ki CK Tai Qidong Q Wang Naixiang N Tang Guanqi G Loi Hok-Leung HL Yan Feng F

Advanced science (Weinheim, Baden-Wurttemberg, Germany) 20190713 17

Organic-inorganic hybrid perovskites have emerged as promising functional materials for high-performance photodetectors. However, the toxicity of Pb and the lack of internal gain mechanism in typical perovskites significantly hinder their practical applications. Herein, a low-voltage and high-performance photodetector based on a single layer of lead-free Sn-based perovskite film is reported. The device shows broadband response from ultraviolet to near-infrared light with a responsivity up to 10< ...[more]

PMID: 31508281

Similar Datasets

Ultrafast and highly sensitive infrared photodetectors based on two-dimensional oxyselenide crystals.

Project description:Infrared light detection and sensing is deeply embedded in modern technology and human society and its development has always been benefitting from the discovery of various photoelectric materials. The rise of two-dimensional materials, thanks to their distinct electronic structures, extreme dimensional confinement and strong light-matter interactions, provides a material platform for next-generation infrared photodetection. Ideal infrared detectors should have fast respond, high sensitivity and air-stability, which are rare to meet at the same time in one two-dimensional material. Herein we demonstrate an infrared photodetector based on two-dimensional Bi2O2Se crystal, whose main characteristics are outstanding in the whole two-dimensional family: high sensitivity of 65 AW-1 at 1200 nm and ultrafast photoresponse of ~1 ps at room temperature, implying an intrinsic material-limited bandwidth up to 500 GHz. Such great performance is attributed to the suitable electronic bandgap and high carrier mobility of two-dimensional oxyselenide.

| S-EPMC6098096 | biostudies-literature

Gradient 2D/3D Perovskite Films Prepared by Hot-Casting for Sensitive Photodetectors.

Project description:2D Ruddlesden-Popper perovskites have attracted wide attention recently because of tunable optoelectronic properties and have been used as alternatives to their 3D counterparts in various optoelectronic devices. Here, a series of (PEA)2(MA) n -1Pb n I3 n +1 perovskite thin films is designed and fabricated by a convenient hot-casting method to obtain gradient n in the films, which leads to the formation of vertical heterojunctions that can enhance charge separation in the films under light illumination. Based on a single gradient perovskite film, a highly sensitive and stable photodetector with a responsivity up to 149 AW-1 and a specific detectivity of 2 × 1012 Jones is obtained. This work paves a way to realizing high-performance optoelectronic devices with enhanced charge separation by introducing compositional gradient in a perovskite film.

| S-EPMC7375231 | biostudies-literature

Formamidinium Lead Bromide (FAPbBr<sub>3</sub>) Perovskite Microcrystals for Sensitive and Fast Photodetectors.

Project description:Because of the good thermal stability and superior carrier transport characteristics of formamidinium lead trihalide perovskite HC(NH2)2PbX3 (FAPbX3), it has been considered to be a better optoelectronic material than conventional CH3NH3PbX3 (MAPbX3). Herein, we fabricated a FAPbBr3 microcrystal-based photodetector that exhibited a good responsivity of 4000 A W-1 and external quantum efficiency up to 106% under one-photon excitation, corresponding to the detectivity greater than 1014 Jones. The responsivity is two orders of magnitude higher than that of previously reported formamidinium perovskite photodetectors. Furthermore, the FAPbBr3 photodetector's responsivity to two-photon absorption with an 800-nm excitation source can reach 0.07 A W-1, which is four orders of magnitude higher than that of its MAPbBr3 counterparts. The response time of this photodetector is less than 1 ms. This study provides solid evidence that FAPbBr3 can be an excellent candidate for highly sensitive and fast photodetectors.

| S-EPMC6199088 | biostudies-literature

High-Switching-Ratio Photodetectors Based on Perovskite CH₃NH₃PbI₃ Nanowires.

Project description:Hybrid organic-inorganic perovskite materials have attracted extensive attention due to their impressive performance in photovoltaic devices. One-dimensional perovskite CH₃NH₃PbI₃ nanomaterials, possessing unique structural features such as large surface-to-volume ratio, anisotropic geometry and quantum confinement, may have excellent optoelectronic properties, which could be utilized to fabricate high-performance photodetectors. However, in comparison to CH₃NH₃PbI₃ thin films, reports on the fabrication of CH₃NH₃PbI₃ nanowires for optoelectrical application are rather limited. Herein, a two-step spin-coating process has been utilized to fabricate pure-phase and single-crystalline CH₃NH₃PbI₃ nanowires on a substrate without mesoporous TiO₂ or Al₂O₃. The size and density of CH₃NH₃PbI₃ nanowires can be easily controlled by changing the PbI₂ precursor concentration. The as-prepared CH₃NH₃PbI₃ nanowires are utilized to fabricate photodetectors, which exhibit a fairly high switching ratio of ~600, a responsivity of 55 mA/W, and a normalized detectivity of 0.5 × 1011 jones under 532 nm light illumination (40 mW/cm²) at a very low bias voltage of 0.1 V. The as-prepared perovskite CH₃NH₃PbI₃ nanowires with excellent optoelectronic properties are regarded to be a potential candidate for high-performance photodetector application.

| S-EPMC5977332 | biostudies-literature

High-performance nanotube-enhanced perovskite photodetectors.

Project description:Organic-inorganic perovskites have already shown a tremendous potential for low-cost light-harvesting devices. Yet, the relatively low carrier mobilities in bulk perovskites still prevent large-area devices with performances competing with state-of-the-art technologies. Here, we tackle this fundamental challenge by incorporating single-wall carbon nanotubes within a perovskite matrix by means of a simple two-step method in ambient air. Using this nano-engineered hybrid film, we demonstrate large-area photodetectors with responsivities up-to 13.8 A.W-1 and a broad spectral response from 300 to 800 nm, indicating that photocurrent generation arises from the charge transfer from the perovskite matrix to the embedded nanotube network. As the nanotubes facilitate the carrier extraction, these photodetectors also show a fast response time of 10 ms. This is significantly faster than most of previous reports on perovskite-based photodetectors, including devices with much smaller photosensitive areas. This approach is also well-suited for large-scale production of other perovskite-based light-harvesting devices.

| S-EPMC5371979 | biostudies-literature

Planar-integrated single-crystalline perovskite photodetectors.

Project description:Hybrid perovskites are promising semiconductors for optoelectronic applications. However, they suffer from morphological disorder that limits their optoelectronic properties and, ultimately, device performance. Recently, perovskite single crystals have been shown to overcome this problem and exhibit impressive improvements: low trap density, low intrinsic carrier concentration, high mobility, and long diffusion length that outperform perovskite-based thin films. These characteristics make the material ideal for realizing photodetection that is simultaneously fast and sensitive; unfortunately, these macroscopic single crystals cannot be grown on a planar substrate, curtailing their potential for optoelectronic integration. Here we produce large-area planar-integrated films made up of large perovskite single crystals. These crystalline films exhibit mobility and diffusion length comparable with those of single crystals. Using this technique, we produced a high-performance light detector showing high gain (above 10(4) electrons per photon) and high gain-bandwidth product (above 10(8) Hz) relative to other perovskite-based optical sensors.

| S-EPMC4667636 | biostudies-literature

Highly sensitive ultraviolet photodetectors fabricated from ZnO quantum dots/carbon nanodots hybrid films.

Project description:Ultraviolet photodetectors have been fabricated from ZnO quantum dots/carbon nanodots hybrid films, and the introduction of carbon nanodots improves the performance of the photodetectors greatly. The photodetectors can be used to detect very weak ultraviolet signals (as low as 12 nW/cm(2)). The detectivity and noise equivalent power of the photodetector can reach 3.1 × 10(17) cmHz(1/2)/W and 7.8 × 10(-20) W, respectively, both of which are the best values ever reported for ZnO-based photodetectors. The mechanism for the high sensitivity of the photodetectors has been attributed to the enhanced carrier-separation at the ZnO/C interface.

| S-EPMC4264006 | biostudies-other

Perovskite Photodetectors Based on p-i-n Junction With Epitaxial Electron-Blocking Layers.

Project description:Organic-inorganic hybrid perovskite single crystals (PSCs) have been emerged as remarkable materials for some optoelectronic applications such as solid-state photodetectors, solar cells and light emitting diodes due to their excellent optoelectronic properties. To decrease the dark current, function layers based on spin-coating method are frequently requested for intrinsic PSCs to block the injected current by forming energy barrier. However, the amorphous function layers suffer from small carrier mobility and high traps density, which limit the speed of the photoelectric response of perovskite devices. This work supposes to grow thick MAPbBr3 and MAPbI3 mono-crystalline thin films on the surface of intrinsic MAPbBr2.5Cl0.5 PSCs substrate by a heteroepitaxial growth technique to act as electron-blocking layers. Meanwhile, C60 and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) layers are deposited on the opposite surface of substrate PSCs by spin-coating method to block injected holes. This Au-MAPbI3-MAPbBr3-MAPbBr2.5Cl0.5PSCs-C60-PCBM-Ag heterostructure can be used as excellent X-ray photodetector (XPD) due to its low dark current density of 6.97 × 10-11 A cm-2 at -0.5 V bias, high responsivity of 870 mA/W at -100 V bias and X-ray sensitivity as high as 59.7 μC mGy-1 cm-2 at -50 V bias.

| S-EPMC7522216 | biostudies-literature

Polarization Sensitive Photodetectors Based on Two-Dimensional WSe<sub>2</sub>.

Project description:In this work we show the possibility of imparting polarization-sensitive properties to two-dimensional films of graphene-like semiconductors, using WSe2 as an example, by the application of ordered silver triangular nanoprisms. In addition, such nanoprisms made it possible to increase the optical sensitivity of optical detectors created on two-dimensional films by a factor of five due to surface plasmon resonance. The peculiarities of the surface plasmon resonance were shown by theoretical modeling, and the optimal conditions of its occurrence were determined. This article demonstrates an effective approach to creating spectrally selective, polarization-sensitive detectors based on two-dimensional graphene-like semiconductors.

| S-EPMC9182037 | biostudies-literature

Additive Modulated Perovskite Microstructures for High Performance Photodetectors.

Project description:Organic-inorganic hybrid perovskites have been widely used as light sensitive components for high-efficient photodetectors due to their superior optoelectronic properties. However, the unwanted crystallographic defects of perovskites typically result in high dark current, and thus limit the performance of the device. Herein, we introduce a simple route of microstructures control in MAPbI3 perovskites that associates with introducing an additive of 3,3,4,4-benzophenonetetracarboxylic dianhydridean (BPTCD) for crystallization adjustment of the perovskite film. The BPTCD additive can facilitate the formation of high-quality perovskite film with a compact and nearly pinhole-free morphology. Through characterizing the molecular interactions, it was found that the carbonyl groups in BPTCD is the key reason that promoted the nucleation and crystallization of MAPbI3. As a result, we obtained high-efficient and stable perovskite photodetectors with low dark current of 9.98 × 10-8 A at -0.5 V, an on/off ratio value of 103, and a high detectivity exceeding 1012 Jones over the visible region.

| S-EPMC7763584 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data