Dataset Information

Accuracy of commercially available heart rate monitors in athletes: a prospective study.

ABSTRACT: Endurance athletes, particularly competitive runners, are using wrist worn devices with the heart rate (HR) feature to guide their training. However, few studies have assessed the effectiveness of these at high levels of exertion. The purpose of this study was to measure the accuracy of the HR monitor feature in four watches at six different treadmill speeds. This prospective study recruited 50 healthy, athletic adults (68% male, mean age of 29, and mean BMI of 23 kg/m2). All subjects wore a three lead ECG and Polar H7 chest strap monitor and two different randomly assigned wrist worn HR monitors. These included the Apple Watch III, Fitbit Iconic, Garmin Vivosmart HR, and Tom Tom Spark 3. Once all devices were on, they were asked to run at the following speeds on a treadmill (in mph): 4, 5, 6, 7, 8, and 9 for two min. HR was assessed on all devices and agreement among measurements determined with Lin's concordance correlation coefficient (CCC) (rc). The Polar H7 chest strap had the greatest agreement with the ECG (rc=98). This was followed by the Apple Watch III (rc=96). The Fitbit Iconic, Garmin Vivosmart HR, and Tom Tom Spark 3 all had the same level of agreement (rc=89). The Polar H7 chest strap was the most accurate, and the Apple Watch was superior among watches. For endurance athletes and their coaches, a chest strap device or Apple Watch may be the best choice for guiding workouts and performance.

SUBMITTER: Pasadyn SR

PROVIDER: S-EPMC6732081 | biostudies-literature | 2019 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Accuracy of commercially available heart rate monitors in athletes: a prospective study.

Pasadyn Selena R SR Soudan Mohamad M Gillinov Marc M Houghtaling Penny P Phelan Dermot D Gillinov Nicole N Bittel Barbara B Desai Milind Y MY

Cardiovascular diagnosis and therapy 20190801 4

Endurance athletes, particularly competitive runners, are using wrist worn devices with the heart rate (HR) feature to guide their training. However, few studies have assessed the effectiveness of these at high levels of exertion. The purpose of this study was to measure the accuracy of the HR monitor feature in four watches at six different treadmill speeds. This prospective study recruited 50 healthy, athletic adults (68% male, mean age of 29, and mean BMI of 23 kg/m<sup>2</sup>). All subjects ...[more]

PMID: 31555543

Similar Datasets

Project description:Background and objective: Commercially available cannabidiol (CBD) products are increasingly being used for medicinal purposes, including for the treatment of various neurological conditions, but there are growing concerns around adherence to quality control measures that protect consumers. This study was conducted to assess the purity and label accuracy of commercially available CBD products. Methods: Commercially available CBD products were chosen from the open stream of commerce in the United States based on formulations as a tincture, gummy, vape, or topical product. Cannabinoid concentrations were analyzed to verify label accuracy including "full spectrum," "broad spectrum," and "CBD isolate" claims on the product label. Analysis for the presence of contaminants included evaluation for heavy metals, pesticides, and residual solvents. Labeled and actual total amounts of CBD and levels of impurities such as heavy metals, residual solvents, and pesticides were measured. Results: A total of 202 CBD products (100 tinctures, 48 gummies, 34 vape products, and 20 topicals) were chosen to represent a broad sample in the United States. Of the products tested (full spectrum, n = 84; broad spectrum, n = 28; CBD isolate, n = 37), 26% did not meet the definition for product type claimed on the packaging. The majority of products (74%) deviated from their label claim of CBD potency by at least 10%. Heavy metals were detected 52 times across 44 of the 202 products tested, with lead being the most prevalent heavy metal. Residual solvents were detected 446 times across 181 of 202 products, with the highest concentrations reported for hexane, m/p-xylene, methanol, and o-xylene. Of 232 pesticides tested, 26 were found 55 times across 30 products. A total of 3% of heavy metals, 1% of residual solvents, and 1% of pesticides violated >1 regulatory threshold. Discussion: This study demonstrated that the majority of commercially available CBD products tested within the current study are inaccurately labeled. Heavy metals, residual solvents, and pesticides were found in several products, some of which violated regulatory thresholds. Thus, uniform compliance with CBD quality control measures is lacking and raises consumer protection concerns. Improved regulatory oversight of this industry is recommended.

Project description:Background and purposeSemiautomatic measurement of ICA stenosis potentially increases observer reproducibility. In this study, we assessed the diagnostic accuracy and interobserver reproducibility of a commercially available semiautomatic ICA stenosis measurement on CTA and estimated the agreement among different software packages.Materials and methodsWe analyzed 141 arteries from 90 patients with TIA or ischemic stroke. Manual stenosis measurements were performed by 2 neuroradiologists. Semiautomatic measurements by using 4 methods (3mensio and comparable software from Philips, TeraRecon, and Siemens) were performed by 2 observers. Diagnostic accuracy was estimated by comparing semiautomatic with manual measurements. Interobserver reproducibility and agreement between different packages was assessed by calculation of the intraclass correlation coefficient and Bland-Altman 95% limits of agreement. False-negative classifications were retrospectively inspected by a neuroradiologist.ResultsThere was no significant difference in the diagnostic performance of the 4 semiautomatic methods. The sensitivity for detecting ≥50% and ≥70% degree of stenosis was between 76% and 82% and 46% and 62%, respectively. Specificity and overall diagnostic accuracy were between 92% and 97% and 85% and 90%, respectively. The interobserver intraclass correlation coefficient was between 0.83 and 0.96 for semiautomatic measurements and 0.81 for manual measurement. The limits of agreement between each pair of semiautomatic packages ranged from -18%-24% to -33%-31%. False-negative classifications were caused by ulcerative plaques and observer variation in stenosis and reference measurements.ConclusionsSemiautomatic methods have a low-to-good sensitivity and a good specificity and overall diagnostic accuracy. The high interobserver reproducibility makes semiautomatic stenosis measurement valuable for clinical practice, but semiautomatic measurements should be checked by an experienced radiologist.

Dataset Information

Accuracy of commercially available heart rate monitors in athletes: a prospective study.

Publications

Accuracy of commercially available heart rate monitors in athletes: a prospective study.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets