Multilayer Thickness Measurements below the Rayleigh Limit Using FMCW Millimeter and Terahertz Waves.
Ontology highlight
ABSTRACT:
SUBMITTER: Schreiner NS
PROVIDER: S-EPMC6767092 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Eggshells play a number of important roles in the avian and reptile kingdom: protection of internal contents and as a major source of minerals for developing embryos. However, when researching these respective roles, eggshell thickness measurement remains a bottleneck due to the lack of a non-destructive measurement techniques. As a result, many avian and reptile research protocols omit consideration of eggshell thickness bias on egg or embryo growth and development. Here, we validate a non-destructive method to estimate eggshell thickness based on terahertz (THz) reflectance spectroscopy using chicken white coloured eggs. Since terahertz waves are reflected from outer air-eggshell interface, as well as the inner eggshell-membrane boundary, the resulting interference signals depend on eggshell thickness. Thus, it is possible to estimate shell thickness from the oscillation distance in frequency-domain. A linear regression-based prediction model for non-destructive eggshell thickness measurement was developed, which had a coefficient of determination (R2) of 0.93, RMSEP of 0.009, RPD of 3.45 and RER 13.67. This model can estimate eggshell thickness to a resolution of less than 10 μm. This method has the potential to expand the protocols in the field of avian and reptile research, as well as be applied to industrial grading of eggs.
| S-EPMC6978418 | biostudies-literature
Project description:In environmental epidemiology, measurements of exposure biomarkers often fall below the assay's limit of detection. Existing methods for handling this problem, including deletion, substitution, parametric regression, and multiple imputation, can perform poorly if the proportion of "nondetects" is high or parametric models are mis-specified. We propose an approach that treats the measured analyte as the modeled outcome, implying a role reversal when the analyte is a putative cause of a health outcome. Following a scale reversal as well, our approach uses Cox regression to model the analyte, with confounder adjustment. The method makes full use of quantifiable analyte measures, while appropriately treating nondetects as censored. Under the proportional hazards assumption, the hazard ratio for a binary health outcome is interpretable as an adjusted odds ratio: the odds for the outcome at any particular analyte concentration divided by the odds given a lower concentration. Our approach is broadly applicable to cohort studies, case-control studies (frequency matched or not), and cross-sectional studies conducted to identify determinants of exposure. We illustrate the method with cross-sectional survey data to assess sex as a determinant of 2,3,7,8-tetrachlorodibenzo-p-dioxin concentration and with prospective cohort data to assess the association between 2,4,4'-trichlorobiphenyl exposure and psychomotor development.
| S-EPMC3966718 | biostudies-literature
Project description:Millimetre-wave (MMW) frequencies of the electromagnetic spectrum are increasingly being adopted in modern technologies including mobile communications, networking, and security screening. These frequencies are absorbed by the outer layers of the skin, however the biological effects are not well characterised. Thus, as emerging technologies increase human exposure, understanding the effects of MMWs on biological material and cell biology in the skin is critical in determining safe exposure levels. Here, we report on the exposure of primary human dermal fibroblasts to MMWs; we find that the radiation triggers genomic and transcriptomic alterations. In particular, repeated 60 GHz MMW exposures at 2.6 mW cm-2, 46.8 J cm-2 doses, trigger a physiological response in human fibroblasts distinct from conventional cytokine-induced stimulation. Our results show that high dose MMWs induce non-thermal transcriptomic alterations with simultaneous changes in DNA structural dynamics including formation of G-quadruplex and i-motif secondary structures, but not DNA damage.
2022-04-15 | GSE197295 | GEO
Project description:Controlling the propagation properties of terahertz waves is very important in terahertz technologies applied in high-speed communication. Therefore a new-type optically tuned terahertz modulator based on multilayer-MoS2 and silicon is experimentally demonstrated. The terahertz transmission could be significantly modulated by changing the power of the pumping laser. With an annealing treatment as a p-doping method, MoS2 on silicon demonstrates a triple enhancement of terahertz modulation depth compared with the bare silicon. This MoS2-based device even exhibited much higher modulation efficiency than the graphene-based device. We also analyzed the mechanism of the modulation enhancement originated from annealed MoS2, and found that it is different from that of graphene-based device. The unique optical modulating properties of the device exhibit tremendous promise for applications in terahertz switch.
| S-EPMC4782166 | biostudies-literature
Project description:Most clinical trials evaluating COVID-19 therapeutics include assessments of antiviral activity. In recently completed outpatient trials, changes in nasal SARS-CoV-2 RNA levels from baseline were commonly assessed using analysis of covariance (ANCOVA) or mixed models for repeated measures (MMRM) with single-imputation for results below assay lower limits of quantification (LLoQ). Analyzing changes in viral RNA levels with singly-imputed values can lead to biased estimates of treatment effects. In this paper, using an illustrative example from the ACTIV-2 trial, we highlight potential pitfalls of imputation when using ANCOVA or MMRM methods, and illustrate how these methods can be used when considering values <LLoQ as censored measurements. Best practices when analyzing quantitative viral RNA data should include details about the assay and its LLoQ, completeness summaries of viral RNA data, and outcomes among participants with baseline viral RNA ≥LLoQ, as well as those with viral RNA <LLoQ.
| S-EPMC10055451 | biostudies-literature
Project description:Metamaterials are artificially structured media that exibit properties beyond those usually encountered in nature. Typically they are developed for electromagnetic waves at millimetric down to nanometric scales, or for acoustics, at centimeter scales. By applying ideas from transformation optics we can steer Rayleigh-surface waves that are solutions of the vector Navier equations of elastodynamics. As a paradigm of the conformal geophysics that we are creating, we design a square arrangement of Luneburg lenses to reroute Rayleigh waves around a building with the dual aim of protection and minimizing the effect on the wavefront (cloaking). To show that this is practically realisable we deliberately choose to use material parameters readily available and this metalens consists of a composite soil structured with buried pillars made of softer material. The regular lattice of inclusions is homogenized to give an effective material with a radially varying velocity profile and hence varying the refractive index of the lens. We develop the theory and then use full 3D numerical simulations to conclusively demonstrate, at frequencies of seismological relevance 3-10?Hz, and for low-speed sedimentary soil (vs: 300-500?m/s), that the vibration of a structure is reduced by up to 6?dB at its resonance frequency.
| S-EPMC4850458 | biostudies-literature
Project description:Recent years have heralded the introduction of metasurfaces that advantageously combine the vision of sub-wavelength wave manipulation, with the design, fabrication and size advantages associated with surface excitation. An important topic within metasurfaces is the tailored rainbow trapping and selective spatial frequency separation of electromagnetic and acoustic waves using graded metasurfaces. This frequency dependent trapping and spatial frequency segregation has implications for energy concentrators and associated energy harvesting, sensing and wave filtering techniques. Different demonstrations of acoustic and electromagnetic rainbow devices have been performed, however not for deep elastic substrates that support both shear and compressional waves, together with surface Rayleigh waves; these allow not only for Rayleigh wave rainbow effects to exist but also for mode conversion from surface into shear waves. Here we demonstrate experimentally not only elastic Rayleigh wave rainbow trapping, by taking advantage of a stop-band for surface waves, but also selective mode conversion of surface Rayleigh waves to shear waves. These experiments performed at ultrasonic frequencies, in the range of 400-600?kHz, are complemented by time domain numerical simulations. The metasurfaces we design are not limited to guided ultrasonic waves and are a general phenomenon in elastic waves that can be translated across scales.
| S-EPMC5533755 | biostudies-literature
Project description:Rayleigh waves are very useful for ultrasonic nondestructive evaluation of structural and mechanical components. Nonlinear Rayleigh waves have unique sensitivity to the early stages of material degradation because material nonlinearity causes distortion of the waveforms. The self-interaction of a sinusoidal waveform causes second harmonic generation, while the mutual interaction of waves creates disturbances at the sum and difference frequencies that can potentially be detected with minimal interaction with the nonlinearities in the sensing system. While the effect of surface roughness on attenuation and dispersion is well documented, its effects on the nonlinear aspects of Rayleigh wave propagation have not been investigated. Therefore, Rayleigh waves are sent along aluminum surfaces having small, but different, surface roughness values. The relative nonlinearity parameter increased significantly with surface roughness (average asperity heights 0.027-3.992 μm and Rayleigh wavelengths 0.29-1.9 mm). The relative nonlinearity parameter should be decreased by the presence of attenuation, but here it actually increased with roughness (which increases the attenuation). Thus, an attenuation-based correction was unsuccessful. Since the distortion from material nonlinearity and surface roughness occur over the same surface, it is necessary to make material nonlinearity measurements over surfaces having the same roughness or in the future develop a quantitative understanding of the roughness effect on wave distortion.
| S-EPMC8400126 | biostudies-literature
Project description:Controlling the propagation properties of the terahertz waves in graphene holds great promise in enabling novel technologies for the convergence of electronics and photonics. A diode is a fundamental electronic device that allows the passage of current in just one direction based on the polarity of the applied voltage. With simultaneous optical and electrical excitations, we experimentally demonstrate an active diode for the terahertz waves consisting of a graphene-silicon hybrid film. The diode transmits terahertz waves when biased with a positive voltage while attenuates the wave under a low negative voltage, which can be seen as an analogue of an electronic semiconductor diode. Here, we obtain a large transmission modulation of 83% in the graphene-silicon hybrid film, which exhibits tremendous potential for applications in designing broadband terahertz modulators and switchable terahertz plasmonic and metamaterial devices.
| S-EPMC4432643 | biostudies-literature
Project description:Applications of metamaterials in the realization of efficient devices in the terahertz band have recently been considered to achieve wave deflection, focusing, amplitude manipulation and dynamical modulation. Terahertz metamaterials offer practical advantages since their structures have typical sizes of hundreds microns and are within the reach of current three-dimensional (3D) printing technologies. Here, we propose terahertz photonic structures composed of dielectric rods layers made of acrylonitrile styrene acrylate realized by low-cost, rapid, and versatile fused deposition modeling 3D-printing. Terahertz time-domain spectroscopy is employed for the experimental study of their spectral and dynamic response. Measured spectra are interpreted by using simulations performed by an analytical exact solution of the Maxwell equations for a general incidence geometry, by a field expansion as a sum over reciprocal lattice vectors. Results show that the structures possess specific spectral forbidden bands of the incident THz radiation depending on their optical and geometrical parameters. We also find evidence of disorder in the 3D printed structure resulting in the closure of the forbidden bands at frequencies above 0.3 THz. The size disorder of the structures is quantified by studying the dynamics diffusion of THz pulses as a function of the numbers of layers of dielectric rods. Comparison with simulations of light diffusion in photonic crystals with increasing disorder allows estimating the size distributions of elements. By using a Mean Squared Displacement model, from the broadening of the pulses' widths it is also possible to estimate the diffusion coefficient of the terahertz radiation in the photonic structures.
| S-EPMC9124215 | biostudies-literature