Dataset Information

New method to calculate the dynamic factor-flow velocity in Geomorphologic instantaneous unit hydrograph.

ABSTRACT: The determination of characteristic flow velocity is a hydrodynamic problem needs to be solved in the application of geomorphologic instantaneous unit hydrograph (GIUH) for runoff simulation in areas with no or limited data. In this study, 120 watersheds are collected to construct a regression model; 85 of these basins are used for regression analysis, and the 35 remaining basins are utilized to verify the feasibility of the constructed model. Random forest algorithm is applied to screen out important geomorphologic factors from the 16 extracted factors that may affect flow velocity. Multivariate regression is used to establish the numerical relationship between velocity and the selected factors. Sensitivity analysis of each adopted factor in the constructed model is conducted using the LH-OAT method. The rationality and feasibility of the regression model are validated by comparing the flow velocity calculation with a previous approach, which is also calculated based on geomorphological parameters. Subsequently, the runoff simulation based on the GIUH model is evaluated using the proposed technique. Results demonstrate that the proposed formula possesses high fitting accuracy and can be easily used to calculate flow velocity and generate GIUH.

SUBMITTER: Chen Y

PROVIDER: S-EPMC6775115 | biostudies-literature | 2019 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

New method to calculate the dynamic factor-flow velocity in Geomorphologic instantaneous unit hydrograph.

Chen Yingbing Y Shi Peng P Ji Xiaomin X Qu Simin S Zhao Lanlan L Dong Fengcheng F

Scientific reports 20191002 1

The determination of characteristic flow velocity is a hydrodynamic problem needs to be solved in the application of geomorphologic instantaneous unit hydrograph (GIUH) for runoff simulation in areas with no or limited data. In this study, 120 watersheds are collected to construct a regression model; 85 of these basins are used for regression analysis, and the 35 remaining basins are utilized to verify the feasibility of the constructed model. Random forest algorithm is applied to screen out imp ...[more]

PMID: 31578394

Similar Datasets

Project description:BackgroundThe pressure drop-flow relations in myocardial bridges and the assessment of vascular heart disease via fractional flow reserve (FFR) have motivated many researchers the last decades. The aim of this study is to simulate several clinical conditions present in myocardial bridges to determine the flow reserve and consequently the clinical relevance of the disease. From a fluid mechanical point of view the pathophysiological situation in myocardial bridges involves fluid flow in a time dependent flow geometry, caused by contracting cardiac muscles overlying an intramural segment of the coronary artery. These flows mostly involve flow separation and secondary motions, which are difficult to calculate and analyse.MethodsBecause a three dimensional simulation of the haemodynamic conditions in myocardial bridges in a network of coronary arteries is time-consuming, we present a boundary layer model for the calculation of the pressure drop and flow separation. The approach is based on the assumption that the flow can be sufficiently well described by the interaction of an inviscid core and a viscous boundary layer. Under the assumption that the idealised flow through a constriction is given by near-equilibrium velocity profiles of the Falkner-Skan-Cooke (FSC) family, the evolution of the boundary layer is obtained by the simultaneous solution of the Falkner-Skan equation and the transient von-Kármán integral momentum equation.ResultsThe model was used to investigate the relative importance of several physical parameters present in myocardial bridges. Results have been obtained for steady and unsteady flow through vessels with 0 - 85% diameter stenosis. We compare two clinical relevant cases of a myocardial bridge in the middle segment of the left anterior descending coronary artery (LAD). The pressure derived FFR of fixed and dynamic lesions has shown that the flow is less affected in the dynamic case, because the distal pressure partially recovers during re-opening of the vessel in diastole. We have further calculated the wall shear stress (WSS) distributions in addition to the location and length of the flow reversal zones in dependence on the severity of the disease.ConclusionThe described boundary layer method can be used to simulate frictional forces and wall shear stresses in the entrance region of vessels. Earlier models are supplemented by the viscous effects in a quasi three-dimensional vessel geometry with a prescribed wall motion. The results indicate that the translesional pressure drop and the mean FFR compares favourably to clinical findings in the literature. We have further shown that the mean FFR under the assumption of Hagen-Poiseuille flow is overestimated in developing flow conditions.

Project description:BackgroundFunctional and morphological changes of the heart influence blood flow patterns. Therefore, flow patterns may carry diagnostic and prognostic information. Three-dimensional, time-resolved, three-directional phase contrast cardiovascular magnetic resonance (4D PC-CMR) can image flow patterns with unique detail, and using new flow visualization methods may lead to new insights. The aim of this study is to present and validate a novel visualization method with a quantitative potential for blood flow from 4D PC-CMR, called Volume Tracking, and investigate if Volume Tracking complements particle tracing, the most common visualization method used today.MethodsEight healthy volunteers and one patient with a large apical left ventricular aneurysm underwent 4D PC-CMR flow imaging of the whole heart. Volume Tracking and particle tracing visualizations were compared visually side-by-side in a visualization software package. To validate Volume Tracking, the number of particle traces that agreed with the Volume Tracking visualizations was counted and expressed as a percentage of total released particles in mid-diastole and end-diastole respectively. Two independent observers described blood flow patterns in the left ventricle using Volume Tracking visualizations.ResultsVolume Tracking was feasible in all eight healthy volunteers and in the patient. Visually, Volume Tracking and particle tracing are complementary methods, showing different aspects of the flow. When validated against particle tracing, on average 90.5% and 87.8% of the particles agreed with the Volume Tracking surface in mid-diastole and end-diastole respectively. Inflow patterns in the left ventricle varied between the subjects, with excellent agreement between observers. The left ventricular inflow pattern in the patient differed from the healthy subjects.ConclusionVolume Tracking is a new visualization method for blood flow measured by 4D PC-CMR. Volume Tracking complements and provides incremental information compared to particle tracing that may lead to a better understanding of blood flow and may improve diagnosis and prognosis of cardiovascular diseases.

Dataset Information

New method to calculate the dynamic factor-flow velocity in Geomorphologic instantaneous unit hydrograph.

Publications

New method to calculate the dynamic factor-flow velocity in Geomorphologic instantaneous unit hydrograph.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets