Dataset Information

The effect of using different coordinate systems on in-vivo hip angles can be estimated from computed tomography images.

ABSTRACT: Measurements of hip kinematics inherently depend on the coordinate system in which they are derived, yet the effect of the coordinate system definition on calculations of hip angles is not well-understood. Herein, hip angles calculated during dynamic activities were compared using coordinate systems described in the literature. In-vivo kinematic data of 24 participants (13 males) were analyzed during gait and the anterior impingement test using dual fluoroscopy and model-based tracking. Two coordinate systems for the pelvis (anterior pelvic plane, International Society of Biomechanics [ISB]) and three coordinate systems for the femur (table top plane with two definitions of the superior-inferior axis, ISB) were evaluated. Bony landmarks visible on computed tomography (CT) images were identified to establish each coordinate system and used as the basis to calculate differences in hip angles between coordinate system pairs. In the analysis during gait, the maximum differences derived from various coordinate system definitions were 6.7°?±?5.5° for flexion, 7.7°?±?2.1° for rotation, and 5.5°?±?0.7° for adduction. For the anterior impingement test, the differences were 8.1°?±?5.9°, 7.1°?±?1.2°, and 5.3°?±?0.7°, respectively. Landmark-based analysis using CT images could estimate these dynamic differences with errors less than 1.0°. Our results indicate that hip angles can be accurately transformed to angles calculated in different coordinate systems by accounting for the inherent bony anatomy. This information may aid in the interpretation of results across biomechanical studies of the hip.

SUBMITTER: Uemura K

PROVIDER: S-EPMC6800649 | biostudies-literature | 2019 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

The effect of using different coordinate systems on in-vivo hip angles can be estimated from computed tomography images.

Uemura Keisuke K Atkins Penny R PR Anderson Andrew E AE

Journal of biomechanics 20190819

Measurements of hip kinematics inherently depend on the coordinate system in which they are derived, yet the effect of the coordinate system definition on calculations of hip angles is not well-understood. Herein, hip angles calculated during dynamic activities were compared using coordinate systems described in the literature. In-vivo kinematic data of 24 participants (13 males) were analyzed during gait and the anterior impingement test using dual fluoroscopy and model-based tracking. Two coor ...[more]

PMID: 31471111

Similar Datasets

Project description:BackgroundIf the bony region indicating the ilioischial line is established on the preoperative axial computed tomography (CT) image, the distance between the simulated cup and the ilioischial line can be measured on this image so that the surgeon can use these data to define a more accurate preoperative two-dimensional (2D) template of total hip arthroplasty (THA). This study aimed to verify the hypothesis that on the CT axial image, the cortical bone area, indicated by the superimposition of a line (line α) with a perspective projection angle to the ilioischial line on radiography and tangent to the medial acetabular wall, is the cortical bone that represents the ilioischial line on radiography.MethodsStudy 1: If the two measured distances (distance A' and distance B) are sufficiently equal, then the hypothesis can be supported. Distance A' was calculated by multiplying the distance A, between the ilioischial line and the medial margin of the metal cup after THA measured at the level of the hip joint center on the pelvic radiograph, by 0.91 to correct for radiographic magnification. Distance B was defined as the distance between the medial margin of the metal cup and line α on the axial CT image at the level of the hip joint center. These two distances were measured for all 51 hip joints included in the study. Study 2: The difference between distance A and distance A# (distance A on the 2D template) was compared between the group containing 59 primary THAs in which distance B' was measured (distance B in the simulation) and the control group containing 59 primary THAs.ResultsStudy 1: The average distance for A' was 4.5 ± 2 mm, and the average distance for B was 4.7 ± 2.1 mm. The difference between distances A and B was 0.2 ± 0.2 mm. Study 2: The mean difference between distance A and distance A# for the measurement and control groups was 1.8 ± 1.3 mm and 3.7 ± 2.4 mm, respectively (P < 0.001).ConclusionsThe ilioischial line is located in the bony region where line α intersects the medial acetabular wall with a maximum overlap on axial CT images.

Project description:Purpose:To determine the 3-dimensional (3D) in vivo hip translation in patients with symptomatic femoroacetabular impingement syndrome (FAIS) using 3D computed tomography (CT) models with the hip in neutral and FABER (flexion, abduction, and the external rotation) positions and to identify patient predictors associated with the degree of hip translation. Methods:Seventy-eight patients with FAIS and cam lesions underwent CT scans in neutral and FABER positions. Demographics including age, sex, and body mass index (BMI) were recorded for each patient. The cam deformity was characterized both in plain x-ray film and 3D. Translation between both positions was calculated using a validated high-precision 3D-3D registration technique. Univariate and multivariate regression analyses sought factors correlated with translation. Results:The mean age of the patients included in the analysis was 36.3 ± 9.2 years, with 51% of the study group being female. The mean 3D femoral head center translation was 0.84 ± 0.37 mm, decomposed into vectors on standard anatomical directions as 0.13 ± 0.58 mm medial, 0.10 ± 0.54 mm posterior, and 0.08 ± 0.46 mm inferior. Multivariate analysis demonstrated that total translation was associated with larger alpha angles (? = 0.014; 95% confidence interval [CI] 0.003-0.024; P = .013), and greater BMI (? = 0.033; 95% CI 0.001-0.065; P = .042). Furthermore, posterior-inferior translation was associated with BMI (? = 0.032; 95% CI 0.003-0.061; P = .031), whereas medial-lateral translation is associated with the female sex (? = 0.388; 95% CI 0.124-0.634; P = .002), and smaller head radius (? = -0.068; 95% CI -0.128 to -0.007; P = .029). Conclusions:As a provocative maneuver, FABER positioning in patients with FAIS resulted in an average measurable translation of the femoral head center in the posterior, medial, and inferior direction. Factors including sex, BMI, and alpha angle predicted the degree of translation. Clinical Relevance:The current study demonstrates that there is measurable hip translation between the neutral and FABER positions in patients with symptomatic FAIS, which may cause hip microinstability. Furthermore, the study found an association between hip translation and both modifiable and nonmodifiable factors. This may indicate the need for more comprehensive preoperative surgical planning, intraoperative dynamic examination of the hip, and consideration of capsular plication in certain patients.

Project description:BackgroundMany patients with malignant tumors require chemotherapy and radiation therapy, which can result in a decline in physical function and potentially influence bone mineral density (BMD). Furthermore, these treatments necessitate enhanced computed tomography (CT) scans for determining disease staging or treatment outcomes, and opportunistic screening with available imaging data is beneficial for patients at high risk for osteoporosis if existing imaging data can be used. The study aimed to investigate the feasibility of opportunistic screening for osteoporosis using enhanced CT based on a dual-energy CT (DECT) material decomposition technique.MethodsWe prospectively enrolled 346 consecutive patients who underwent abdominal unenhanced and triphasic contrast-enhanced CT (arterial, portal venous, and delayed phases) between June 2021 and June 2022. The BMD, and the density of hydroxyapatite (HAP) on HAP-iodine images and calcium (Ca) on Ca-iodine images were measured on the L1-L3 vertebral bodies. The iodine intake was recorded. Pearson analysis was conducted to assess the correlation between iodine intake and the density values in three phases and the correlation between BMD and the densities of HAP and Ca. Furthermore, linear regression was employed for quantitative evaluation. Bland-Altman analysis was used to evaluate the agreement between calculated BMD derived from DECT (BMD-DECT) and reference BMD derived from quantitative CT (BMD-QCT). Receiver operating characteristic (ROC) analysis was applied to assess the diagnostic efficacy.ResultsThe HAP and Ca density of the L1-L3 vertebral bodies did not differ significantly among the three phases of contrast-enhanced CT (F=0.001-0.049; P>0.05). Significant positive correlations were found between HAP, Ca densities, and BMD (HAP-BMD: r=0.9472, R2=0.8973; Ca-BMD: r=0.9470, R2=0.8968; all P<0.001). Bland-Altman plots showed high agreement between BMD-DECT and BMD-QCT. The area under the curve (AUC) using HAP and Ca measurements was 0.963 [95% confidence interval (CI): 0.937-0.980] and 0.964 (95% CI: 0.939-0.981), respectively, for diagnosing osteoporosis and was 0.951 (95% CI: 0.917-0.973) and 0.950 (95% CI: 0.916-0.973), respectively, for diagnosing osteopenia.ConclusionsThe HAP and Ca density measurements generated through the material decomposition technique in DECT have good diagnostic performances in assessing BMD, which offers a new perspective for opportunistic screening of osteoporosis on contrast-enhanced CT.

Project description:BackgroundThis study aimed to develop an automated method to measure the gray-white matter ratio (GWR) from brain computed tomography (CT) scans of patients with out-of-hospital cardiac arrest (OHCA) and assess its significance in predicting early-stage neurological outcomes.MethodsPatients with OHCA who underwent brain CT imaging within 12 h of return of spontaneous circulation were enrolled in this retrospective study. The primary outcome endpoint measure was a favorable neurological outcome, defined as cerebral performance category 1 or 2 at hospital discharge. We proposed an automated method comprising image registration, K-means segmentation, segmentation refinement, and GWR calculation to measure the GWR for each CT scan. The K-means segmentation and segmentation refinement was employed to refine the segmentations within regions of interest (ROIs), consequently enhancing GWR calculation accuracy through more precise segmentations.ResultsOverall, 443 patients were divided into derivation N=265, 60% and validation N=178, 40% sets, based on age and sex. The ROI Hounsfield unit values derived from the automated method showed a strong correlation with those obtained from the manual method. Regarding outcome prediction, the automated method significantly outperformed the manual method in GWR calculation (AUC 0.79 vs. 0.70) across the entire dataset. The automated method also demonstrated superior performance across sensitivity, specificity, and positive and negative predictive values using the cutoff value determined from the derivation set. Moreover, GWR was an independent predictor of outcomes in logistic regression analysis. Incorporating the GWR with other clinical and resuscitation variables significantly enhanced the performance of prediction models compared to those without the GWR.ConclusionsAutomated measurement of the GWR from non-contrast brain CT images offers valuable insights for predicting neurological outcomes during the early post-cardiac arrest period.

Dataset Information

The effect of using different coordinate systems on in-vivo hip angles can be estimated from computed tomography images.

Publications

The effect of using different coordinate systems on in-vivo hip angles can be estimated from computed tomography images.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets