Dataset Information

Effect of collection methods on combustion particle physicochemical properties and their biological response in a human macrophage-like cell line.

ABSTRACT: In vitro studies are a first step toward understanding the biological effects of combustion-derived particulate matter (cdPM). A vast majority of studies expose cells to cdPM suspensions, which requires a method to collect cdPM and suspend it in an aqueous media. The consequences of different particle collection methods on particle physiochemical properties and resulting biological responses are not fully understood. This study investigated the effect of two common approaches (collection on a filter and a cold plate) and one relatively new (direct bubbling in DI water) approach to particle collection. The three approaches yielded cdPM with differences in particle size distribution, surface area, composition, and oxidative potential. The directly bubbled sample retained the smallest sized particles and the bimodal distribution observed in the gas-phase. The bubbled sample contained ?50% of its mass as dissolved species and lower molecular weight compounds, not found in the other two samples. These differences in the cdPM properties affected the biological responses in THP-1 cells. The bubbled sample showed greater oxidative potential and cellular reactive oxygen species. The scraped sample induced the greatest TNF? secretion. These findings have implications for in vitro studies of air pollution and for efforts to better understand the underlying mechanisms.

SUBMITTER: Kaur K

PROVIDER: S-EPMC6801061 | biostudies-literature | 2019

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Effect of collection methods on combustion particle physicochemical properties and their biological response in a human macrophage-like cell line.

Kaur Kamaljeet K Jaramillo Isabel C IC Mohammadpour Raziye R Sturrock Anne A Ghandehari Hamidreza H Reilly Christopher C Paine Robert R Kelly Kerry E KE

Journal of environmental science and health. Part A, Toxic/hazardous substances & environmental engineering 20190725 12

<i>In vitro</i> studies are a first step toward understanding the biological effects of combustion-derived particulate matter (cdPM). A vast majority of studies expose cells to cdPM suspensions, which requires a method to collect cdPM and suspend it in an aqueous media. The consequences of different particle collection methods on particle physiochemical properties and resulting biological responses are not fully understood. This study investigated the effect of two common approaches (collection ...[more]

PMID: 31342848

Similar Datasets

Project description:The physicochemical properties of combustion particles that promote lung toxicity are not fully understood, hindered by the fact that combustion particles vary based on the fuel and combustion conditions. Real-world combustion-particle properties also continually change as new fuels are implemented, engines age, and engine technologies evolve. This work used laboratory-generated particles produced under controlled combustion conditions in an effort to understand the relationship between different particle properties and the activation of established toxicological outcomes in human lung cells (H441 and THP-1). Particles were generated from controlled combustion of two simple biofuel/diesel surrogates (methyl decanoate and dodecane/biofuel-blended diesel (BD), and butanol and dodecane/alcohol-blended diesel (AD)) and compared to a widely studied reference diesel (RD) particle (NIST SRM2975/RD). BD, AD, and RD particles exhibited differences in size, surface area, extractable chemical mass, and the content of individual polycyclic aromatic hydrocarbons (PAHs). Some of these differences were directly associated with different effects on biological responses. BD particles had the greatest surface area, amount of extractable material, and oxidizing potential. These particles and extracts induced cytochrome P450 1A1 and 1B1 enzyme mRNA in lung cells. AD particles and extracts had the greatest total PAH content and also caused CYP1A1 and 1B1 mRNA induction. The RD extract contained the highest relative concentration of 2-ring PAHs and stimulated the greatest level of interleukin-8 (IL-8) and tumor necrosis factor-alpha (TNFα) cytokine secretion. Finally, AD and RD were more potent activators of TRPA1 than BD, and while neither the TRPA1 antagonist HC-030031 nor the antioxidant N-acetylcysteine (NAC) affected CYP1A1 or 1B1 mRNA induction, both inhibitors reduced IL-8 secretion and mRNA induction. These results highlight that differences in fuel and combustion conditions affect the physicochemical properties of particles, and these differences, in turn, affect commonly studied biological/toxicological responses.

Project description:BackgroundMineral trioxide aggregate (MTA) is a commonly used endodontic biomaterial. The physicochemical properties of MTA have a crucial role in designating clinical outcome, and different factors can affect these properties. Various methods have been used for mixing MTA, including manual, mechanical, and ultrasonic. The aim of this systematic review was to evaluate the effect of different mixing methods on the physicochemical properties of MTA.Materials and methodsElectronic databases including PubMed, Embase, Web of Science, and Scopus were searched up to May 2022. In order to cover gray literature, the ProQuest and Google Scholar databases were also searched to detect theses and conference proceedings. For quality assessment of the included studies, we used a modified version of the Cochrane risk of bias tool for randomized controlled trials (RCTs). Experimental studies which had assessed at least one property of MTA and compared at least two different mixing methods of MTA were included in this study. All animal studies, reviews, case reports, and case series were excluded.ResultsFourteen studies were included. The results showed that the ultrasonic mixing method significantly improved some MTA characteristics, including microhardness, flowability, solubility, setting time, and porosity. However, the mechanical mixing method improved other properties including flowability, solubility, push-out bond strength, and hydration. The manual mixing method showed inferior results compared to other mixing methods in terms of microhardness, flowability, solubility, setting time, push-out bond strength, porosity, and hydration. Different mixing methods had a similar effect on compressive strength, sealing ability, pH and calcium ion release, volume change, film thickness, and flexural strength of MTA.ConclusionMechanical and ultrasonic mixing methods are superior to the manual mixing method in terms of improving physicochemical properties of MTA. No report of selection bias and varieties in methodologies were limitations of evidence.

Project description:Chamomile (Matricaria chamomilla L.) is a traditional medicinal plant used to treat hay fever, inflammation, muscle spasms, menstrual disorders, insomnia ulcers, wounds, gastrointestinal disorders, rheumatic pain, and hemorrhoids. Dried chamomile flowers have a longer shelf life and the dried extract in form of powder offers much flexibility for new therapeutic formulations as it could be used as a replacement for liquid extract and serve as a shelf-stable ingredient in new applications. This study aims to determine the effect of drying methods, i.e., convection oven-drying at 45 °C, freeze-drying at -50°C, and spray-drying at 140°C at 10.5 and 12 ml/min, respectively) on powder yield, physicochemical properties (moisture content, water activity, and color attributes), and total polyphenol content of chamomile extract powder. Our findings showed that spray-drying conducted at 140°C, 12 ml/min resulted in the lowest yield of powder (16.67%) compared to convection oven-drying (90.17%) and freeze-drying (83.24%). Decreasing the feed flow rate to 10.5 ml/min during spraying caused an increase in powder yield to 26.99%. The moisture content of spray-dried chamomile extract powder obtained at 140°C, 10.5 ml/min was higher (11.00%) compared to that of convection oven-dried (8.50%) and freeze-dried (7.50%). Both convection oven-dried and freeze-dried chamomile extract powder displayed no significant difference (p > 0.05) in moisture content. The higher feed flow rate (12 ml/min) in spray-drying also led to an increase in the moisture content of chamomile extract powder to 12.00%. The higher residual moisture found in the spray-dried samples resulted in partial agglomeration of particles. In terms of water activity, freeze-dried chamomile extract powder was found to have the highest water activity (0.63) compared to that of convection oven-dried (0.52), spray-dried at 140°C, 10.5 ml/min (0.57), and spray-dried at 140°C, 12 ml/min (0.58). Spray-dried and freeze-dried chamomile extract powder with high moisture content and water activity could be highly susceptible to microbial growth. In terms of color attributes, higher drying temperature in spray-drying led to darker, redder, and more yellowish chamomile extract powder that could be caused by heat-induced Maillard reaction and caramelization. Since lower drying temperature was used in both convection oven-drying and freeze-drying, both convection oven-dried (56.94 mg GAE/g powder) and freeze-dried chamomile extract powder (55.98 mg GAE/g powder) were found to have higher total polyphenol content compared to those of spray-dried (42.79-46.79 mg GAE/g powder). The present findings allow us to understand the effect of drying methods on the properties of chamomile extract powder and provide a better drying option to dry chamomile extract. Due to higher powder yield with ideal powder properties such as low moisture content and water activity, desirable color, and high total polyphenol content obtained from convection oven-drying, convection oven-drying was a better option than freeze-drying and spray-drying for drying chamomile extract.

Dataset Information

Effect of collection methods on combustion particle physicochemical properties and their biological response in a human macrophage-like cell line.

Publications

Effect of collection methods on combustion particle physicochemical properties and their biological response in a human macrophage-like cell line.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets