Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Smart-phone, paper-based fluorescent sensor for ultra-low inorganic phosphate detection in environmental samples.

ABSTRACT: A major goal of environmental agencies today is to conduct point-of-collection monitoring of excess inorganic phosphate (Pi) in environmental water samples for tracking aquatic "dead zones" caused by algae blooms. However, there are no existing commercial devices which have been miniaturized and are suitable for the point-of-need-testing ("PONT") that is required to fully map a large region, such as the Florida Everglades. To solve this challenge, a reflection-mode fluorescence-sensing apparatus was developed, leveraging an environmentally sensitive fluorophore (MDCC) bound to a bacterial phosphate-binding protein to generate a fluorescent optical signal proportional to the concentration of (Pi) present. The combined end-to-end integrated sensor system had a response time of only 4 s, with minimal effects of common interfering agents and a linear range spanning from 1.1 to 64 ppb. To support ease-of-use during PONT, the platform incorporated disposable wax-printed paper strip sample pads and a smartphone camera detection system. Since the EPA threshold is currently 30 ppb to prevent eutrophication, this system serves as a rapid test of whether a region is compliant.

SUBMITTER: Sarwar M

PROVIDER: S-EPMC6803704 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Indoor-Outdoor Detection Using a Smart Phone Sensor.

Project description:In the era of mobile internet, Location Based Services (LBS) have developed dramatically. Seamless Indoor and Outdoor Navigation and Localization (SNAL) has attracted a lot of attention. No single positioning technology was capable of meeting the various positioning requirements in different environments. Selecting different positioning techniques for different environments is an alternative method. Detecting the users' current environment is crucial for this technique. In this paper, we proposed to detect the indoor/outdoor environment automatically without high energy consumption. The basic idea was simple: we applied a machine learning algorithm to classify the neighboring Global System for Mobile (GSM) communication cellular base station's signal strength in different environments, and identified the users' current context by signal pattern recognition. We tested the algorithm in four different environments. The results showed that the proposed algorithm was capable of identifying open outdoors, semi-outdoors, light indoors and deep indoors environments with 100% accuracy using the signal strength of four nearby GSM stations. The required hardware and signal are widely available in our daily lives, implying its high compatibility and availability.

| S-EPMC5087352 | biostudies-literature

Fluorescent imaging of single nanoparticles and viruses on a smart phone.

Project description:Optical imaging of nanoscale objects, whether it is based on scattering or fluorescence, is a challenging task due to reduced detection signal-to-noise ratio and contrast at subwavelength dimensions. Here, we report a field-portable fluorescence microscopy platform installed on a smart phone for imaging of individual nanoparticles as well as viruses using a lightweight and compact opto-mechanical attachment to the existing camera module of the cell phone. This hand-held fluorescent imaging device utilizes (i) a compact 450 nm laser diode that creates oblique excitation on the sample plane with an incidence angle of ~75°, (ii) a long-pass thin-film interference filter to reject the scattered excitation light, (iii) an external lens creating 2× optical magnification, and (iv) a translation stage for focus adjustment. We tested the imaging performance of this smart-phone-enabled microscopy platform by detecting isolated 100 nm fluorescent particles as well as individual human cytomegaloviruses that are fluorescently labeled. The size of each detected nano-object on the cell phone platform was validated using scanning electron microscopy images of the same samples. This field-portable fluorescence microscopy attachment to the cell phone, weighing only ~186 g, could be used for specific and sensitive imaging of subwavelength objects including various bacteria and viruses and, therefore, could provide a valuable platform for the practice of nanotechnology in field settings and for conducting viral load measurements and other biomedical tests even in remote and resource-limited environments.

| S-EPMC3951925 | biostudies-literature

Detection and spatial mapping of mercury contamination in water samples using a smart-phone.

Project description:Detection of environmental contamination such as trace-level toxic heavy metal ions mostly relies on bulky and costly analytical instruments. However, a considerable global need exists for portable, rapid, specific, sensitive, and cost-effective detection techniques that can be used in resource-limited and field settings. Here we introduce a smart-phone-based hand-held platform that allows the quantification of mercury(II) ions in water samples with parts per billion (ppb) level of sensitivity. For this task, we created an integrated opto-mechanical attachment to the built-in camera module of a smart-phone to digitally quantify mercury concentration using a plasmonic gold nanoparticle (Au NP) and aptamer based colorimetric transmission assay that is implemented in disposable test tubes. With this smart-phone attachment that weighs <40 g, we quantified mercury(II) ion concentration in water samples by using a two-color ratiometric method employing light-emitting diodes (LEDs) at 523 and 625 nm, where a custom-developed smart application was utilized to process each acquired transmission image on the same phone to achieve a limit of detection of ∼ 3.5 ppb. Using this smart-phone-based detection platform, we generated a mercury contamination map by measuring water samples at over 50 locations in California (USA), taken from city tap water sources, rivers, lakes, and beaches. With its cost-effective design, field-portability, and wireless data connectivity, this sensitive and specific heavy metal detection platform running on cellphones could be rather useful for distributed sensing, tracking, and sharing of water contamination information as a function of both space and time.

| S-EPMC3949663 | biostudies-literature

Analysis of oxygen isotopes of inorganic phosphate (δ<sup>18</sup>O<sub>p</sub>) in freshwater: A detailed method description for obtaining oxygen isotopes of inorganic phosphate in environmental water samples.

Project description:The ability to identify the origin of phosphorus and understand processes controlling P cycling is essential for designing effective mitigation and restoration of eutrophic freshwater ecosystems. The oxygen isotope composition of orthophosphate (δ18Op) has significant potential as a tracer for P entering freshwater ecosystems. However, methods of analysis of δ18Op are still in their preliminary stages and have proven challenging to implement for new practitioners. In order to achieve progress in developing the application of δ18Op signatures as a tracing tool, there is a need to eliminate the methodological challenges involved in accurately determining δ18Op. This protocol article describes the various steps needed to concentrate and isolate orthophosphate in freshwater samples into an adequately pure Ag3PO4 analyte, without isotopic alteration during processing. The protocol compiles the disperse experiences from previous studies, combined with our own experience. The twofold aim of the paper is toprovide a baseline for an increasing standardisation of the silver phosphate purification method associated with analysis of the oxygen isotope composition of orthophosphate (δ18Op), and to foster new research in the applicability of δ18Op signatures for P source tracing in catchment science.

| S-EPMC9062346 | biostudies-literature

A smart deoxyribozyme-based fluorescent sensor for in vitro detection of androgen receptor mRNA.

Project description:Nowadays a variety of biosensors are widely used in different fields, including biomedical diagnostics and self-testing. Nucleic acid-based biosensors are typically applied to detect another nucleic acid, proteins, ions, and several other types of compounds. It is most promising to develop simple and effective biosensors for the use in situations where traditional methods are not available due to their complexity and laboriousness. In this project, a novel smart deoxyribozyme-based fluorescent sensor for the detection of androgen receptor mRNA was developed. It consists of several functional modules including two deoxyribozymes 10-23, an RNA-dependent split malachite green aptamer, and an oligonucleotide platform. Deoxyribozymes specifically release a 27-nucleotide RNA fragment that is readily available for the interaction with the aptamer module. This solves a problem of secondary structure in hybridization with the target sequence of full-length mRNA. It was shown that within 24 hours the proposed sensor specifically recognized both a synthetic 60-nucleotide RNA fragment (LOD is 1.4 nM of RNA fragment at 37 °C) and a full-sized mRNA molecule of the androgen receptor. The constructed sensor is easy to use, has high efficiency and selectivity for the RNA target, and can be reconstructed for the detection of various nucleic acid sequences due to its modular structure. Thus, similar biosensors may be useful for the differential diagnosis.

| S-EPMC7277777 | biostudies-literature

Fluorescent peptide dH3w: A sensor for environmental monitoring of mercury (II).

Project description:Heavy metals are hazardous environmental contaminants, often highly toxic even at extremely low concentrations. Monitoring their presence in environmental samples is an important but complex task that has attracted the attention of many research groups. We have previously developed a fluorescent peptidyl sensor, dH3w, for monitoring Zn2+ in living cells. This probe, designed on the base on the internal repeats of the human histidine rich glycoprotein, shows a turn on response to Zn2+ and a turn off response to Cu2+. Other heavy metals (Mn2+, Fe2+, Ni2+, Co2+, Pb2+ and Cd2+) do not interfere with the detection of Zn2+ and Cu2+. Here we report that dH3w has an affinity for Hg2+ considerably higher than that for Zn2+ or Cu2+, therefore the strong fluorescence of the Zn2+/dH3w complex is quenched when it is exposed to aqueous solutions of Hg2+, allowing the detection of sub-micromolar levels of Hg2+. Fluorescence of the Zn2+/dH3w complex is also quenched by Cu2+ whereas other heavy metals (Mn2+, Fe2+, Ni2+, Co2+, Cd2+, Pb2+, Sn2+ and Cr3+) have no effect. The high affinity and selectivity suggest that dH3w and the Zn2+/dH3w complex are suited as fluorescent sensor for the detection of Hg2+ and Cu2+ in environmental as well as biological samples.

| S-EPMC6179210 | biostudies-literature

Smart Phone App for COLOnoscopic PREParation

Project description:This is a randomized controlled trial designed to assess the efficacy of a novel smartphone application as an automated reminder tool in improving the quality of bowel preparation for patients undergoing outpatient colonoscopies. The investigators will be comparing the smartphone application to traditional instructions for bowel preparation. The quality of bowel preparation will be assessed using the Ottawa and Aronchick bowel preparation scales.

| 2249936 | ecrin-mdr-crc

Double layer 3D codes: fluorescent supramolecular polymeric gels allowing direct recognition of the chloride anion using a smart phone.

Project description:Reported here is a two-layer gel construct that permits the on-site detection of the chloride anion by means of a hand-held UV-vis lamp and a smart phone "app". To prepare this system, eight fluorescent polymeric gels G1-G8 were synthesized. Gels G1-G4 containing C4P/imidazolium-F- anion recognition motifs were used to construct a fluorescent pattern (Code A) that may be read out by a smart phone as a 3D color code (Info A). Gels G5-G8, which are based on C4P/imidazolium-Br- anion interactions, were used to construct an array (Code B) that may be read as Info B. Code B was then adhered to the surface of Code A to produce an adhered double layer code system stabilized by interfacial C4P/imidazolium-Br- anion interactions. Readout of the top layer (Code B) could be achieved without interference from Code A. Treatment with a Cl- anion source was found to delaminate the top layer and leave intact the more robust bottom layer, allowing the bottom layer (Code A) to be read out. The disparate information content associated with Codes A and B thus permits the on-site recognition of Cl-. The present sensing strategy does not rely on elaborate instrumentation and could provide a new application for elaborated soft materials.

| S-EPMC6195100 | biostudies-literature

An Acridine-Based Fluorescent Sensor for Monitoring ClO- in Water Samples and Zebrafish.

Project description:A novel acridine-based fluorescent chemosensor, BK ((E)-2-((acridine-9-ylimino)methyl)-N-benzhydrylhydrazine-1-carbothioamide), for monitoring ClO- was prepared. The sensor BK was synthesized by introducing a new synthetic route of making aldehyde group using formic hydrazide. Probe BK displayed notable fluorescence quenching in the presence of ClO- and showed a great selectivity over other guest analytes. The detection limit was calculated to be 7.65 ?M. Additionally, BK was satisfactorily applied for sensing ClO- in water samples and zebrafish.

| S-EPMC7506904 | biostudies-literature

Fluorescent Sensor Arrays Can Predict and Quantify the Composition of Multicomponent Bacterial Samples.

Project description:Fast and reliable identification of infectious disease agents is among the most important challenges for the healthcare system. The discrimination of individual components of mixed infections represents a particularly difficult task. In the current study we further expand the functionality of a ratiometric sensor array technology based on small-molecule environmentally-sensitive organic dyes, which can be successfully applied for the analysis of mixed bacterial samples. Using pattern recognition methods and data from pure bacterial species, we demonstrate that this approach can be used to quantify the composition of mixtures, as well as to predict their components with the accuracy of ~80% without the need to acquire additional reference data. The described approach significantly expands the functionality of sensor arrays and provides important insights into data processing for the analysis of other complex samples.

| S-EPMC6974461 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data