Browse
Submit Data
Databases
API
Help

Dataset Information

36 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Comparative Life Cycle Assessment of a Novel Al-Ion and a Li-Ion Battery for Stationary Applications.

ABSTRACT: The foreseen high penetration of fluctuant renewable energy sources, such as wind and solar, will cause an increased need for batteries to store the energy produced and not instantaneously consumed. Due to the high production cost and significant environmental impacts associated with the production of lithium-ion nickel-manganese-cobalt (Li-ion NMC) batteries, several chemistries are proposed as a potential substitute. This study aims to identify and compare the lifecycle environmental impacts springing from a novel Al-ion battery, with the current state-of-the-art chemistry, i.e., Li-ion NMC. The global warming potential (GWP) indicator was selected to express the results due to its relevance to society, policy and to facilitate the comparison of our results with other research. The cradle-to-grave process-based assessment uses two functional units: (1) per-cell manufactured and (2) per-Wh of storage capacity. The results identified the battery's production as the highest carbon intensity phase, being the energy usage the main contributor to GWP. In general, the materials and process involved in the manufacturing and recycling of the novel battery achieve a lower environmental impact in comparison to the Li-ion technology. However, due to the Al-ion's low energy density, a higher amount of materials are needed to deliver equivalent performance than a Li-ion.

SUBMITTER: Salgado Delgado MA

PROVIDER: S-EPMC6803941 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

A high-power and fast charging Li-ion battery with outstanding cycle-life.

Project description:Electrochemical energy storage devices based on Li-ion cells currently power almost all electronic devices and power tools. The development of new Li-ion cell configurations by incorporating innovative functional components (electrode materials and electrolyte formulations) will allow to bring this technology beyond mobile electronics and to boost performance largely beyond the state-of-the-art. Here we demonstrate a new full Li-ion cell constituted by a high-potential cathode material, i.e. LiNi0.5Mn1.5O4, a safe nanostructured anode material, i.e. TiO2, and a composite electrolyte made by a mixture of an ionic liquid suitable for high potential applications, i.e. Pyr1,4PF6, a lithium salt, i.e. LiPF6, and standard organic carbonates. The final cell configuration is able to reversibly cycle lithium for thousands of cycles at 1000 mAg-1 and a capacity retention of 65% at cycle 2000.

| S-EPMC5430621 | biostudies-literature

Superior Low-Temperature Power and Cycle Performances of Na-Ion Battery over Li-Ion Battery.

Project description:The most simple and clear advantage of Na-ion batteries (NIBs) over Li-ion batteries (LIBs) is the natural abundance of Na, which allows inexpensive production of NIBs for large-scale applications. However, although strenuous research efforts have been devoted to NIBs particularly since 2010, certain other advantages of NIBs have been largely overlooked, for example, their low-temperature power and cycle performances. Herein, we present a comparative study of spirally wound full-cells consisting of Li0.1Na0.7Co0.5Mn0.5O2 (or Li0.8Co0.5Mn0.5O2) and hard carbon and report that the power of NIB at -30 °C is ∼21% higher than that of LIB. Moreover, the capacity retention in cycle testing at 0 °C is ∼53% for NIB but only ∼29% for LIB. Raman spectroscopy and density functional theory calculations revealed that the superior performance of NIB is due to the relatively weak interaction between Na+ ions and aprotic polar solvents.

| S-EPMC6640915 | biostudies-literature

Comparative life cycle assessment of high performance lithium-sulfur battery cathodes.

Project description:Lithium-sulfur (Li-S) batteries present a great potential to displace current energy storage chemistries thanks to their energy density that goes far beyond conventional batteries. To promote the development of greener Li-S batteries, closing the existing gap between the quantification of the potential environmental impacts associated with Li-S cathodes and their performance is required. Herein we show a comparative analysis of the life cycle environmental impacts of five Li-S battery cathodes with high sulfur loadings (1.5-15 mg·cm-2) through life cycle assessment (LCA) methodology and cradle-to-gate boundary. Depending on the selected battery, the environmental impact can be reduced by a factor up to 5. LCA results from Li-S batteries are compared with the conventional lithium ion battery from Ecoinvent 3.6 database, showing a decreased environmental impact per kWh of storage capacity. A predominant role of the electrolyte on the environmental burdens associated with the use of Li-S batteries was also found. Sensitivity analysis shows that the specific impacts can be reduced by up to 70% by limiting the amount of used electrolyte. Overall, this manuscript emphasizes the potential of Li-S technology to develop environmentally benign batteries aimed at replacing existing energy storage systems.

| S-EPMC7537670 | biostudies-literature

High-rate aluminium yolk-shell nanoparticle anode for Li-ion battery with long cycle life and ultrahigh capacity.

Project description:Alloy-type anodes such as silicon and tin are gaining popularity in rechargeable Li-ion batteries, but their rate/cycling capabilities should be improved. Here by making yolk-shell nanocomposite of aluminium core (30?nm in diameter) and TiO2 shell (?3?nm in thickness), with a tunable interspace, we achieve 10?C charge/discharge rate with reversible capacity exceeding 650?mAh?g(-1) after 500 cycles, with a 3?mg?cm(-2) loading. At 1 C, the capacity is approximately 1,200?mAh?g(-1) after 500 cycles. Our one-pot synthesis route is simple and industrially scalable. This result may reverse the lagging status of aluminium among high-theoretical-capacity anodes.

| S-EPMC4918313 | biostudies-literature

Template Free and Binderless NiO Nanowire Foam for Li-ion Battery Anodes with Long Cycle Life and Ultrahigh Rate Capability.

Project description:Herein, NiO-decorated Ni nanowires with diameters ca. 30-150 nm derived from Ni wire backbone (ca. 2 μm in diameter) is directly synthesized on commercially available Ni foam as a renovated anode for Li-ion batteries. Excellent stability with capacity 680 mAh g(-1) at 0.5C (1C = 718 mA g(-1)) is achieved after 1000 cycles. Superior rate capability is exhibited by cycling at extremely high current rates, such as 20C and 50C with capacities ca. 164 and 75 mAh g(-1), respectively. The capacity can be recovered back to ca. 430 mAh g(-1) in 2 cycles when lowered to 0.2C and stably cycled for 430 times with capacity 460 mAh g(-1). The NiO nanowire foam anode possesses low equivalent series resistance ca. 3.5 Ω, resulting in superior power performance and low resistive losses. The NiO nanowire foam can be manufactured with bio-friendly chemicals and low temperature processes without any templates, binders and conductive additives, which possesses the potential transferring from lab scale to industrial production.

| S-EPMC4947918 | biostudies-literature

Environmentally-friendly aqueous Li (or Na)-ion battery with fast electrode kinetics and super-long life.

Project description:Current rechargeable batteries generally display limited cycle life and slow electrode kinetics and contain environmentally unfriendly components. Furthermore, their operation depends on the redox reactions of metal elements. We present an original battery system that depends on the redox of I(-)/I3 (-) couple in liquid cathode and the reversible enolization in polyimide anode, accompanied by Li(+) (or Na(+)) diffusion between cathode and anode through a Li(+)/Na(+) exchange polymer membrane. There are no metal element-based redox reactions in this battery, and Li(+) (or Na(+)) is only used for charge transfer. Moreover, the components (electrolyte/electrode) of this system are environment-friendly. Both electrodes are demonstrated to have very fast kinetics, which gives the battery a supercapacitor-like high power. It can even be cycled 50,000 times when operated within the electrochemical window of 0 to 1.6 V. Such a system might shed light on the design of high-safety and low-cost batteries for grid-scale energy storage.

| S-EPMC4737207 | biostudies-literature

CuO single crystal with exposed {001} facets--a highly efficient material for gas sensing and Li-ion battery applications.

Project description:Single crystal copper oxide nanoplatelets with a high percentage of {001} facets were synthesized by a facile hydrothermal approach. The as-prepared materials were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, and high resolution transmission microscopy. Via density functional theory calculations, it was found that the {001} facets are active crystal planes. When the single crystal CuO nanoplatelets were applied as an anode material in Li-ion batteries, they demonstrated outstanding electrochemical performance with high lithium storage capacity, satisfactory cyclability, and excellent high rate capacity. When used as a sensing material in gas sensors, they exhibited a superior sensitivity towards toxic and flammable gases.

| S-EPMC4148666 | biostudies-literature

Correction to “Prospective Life Cycle Assessment of Lithium–Sulfur Batteries for Stationary Energy Storage”

Project description: Not available

| S-EPMC11022237 | biostudies-literature

High Areal Capacity Porous Sn-Au Alloys with Long Cycle Life for Li-ion Microbatteries.

Project description:Long-term stability is one of the most desired functionalities of energy storage microdevices for wearable electronics, wireless sensor networks and the upcoming Internet of Things. Although Li-ion microbatteries have become the dominant energy-storage technology for on-chip electronics, the extension of lifetime of these components remains a fundamental hurdle to overcome. Here, we develop an ultra-stable porous anode based on SnAu alloys able to withstand a high specific capacity exceeding 100 µAh cm-2 at 3?C rate for more than 6000 cycles of charge/discharge. Also, this new anode material exhibits low potential (0.2?V versus lithium) and one of the highest specific capacity ever reported at low C-rates (7.3 mAh cm-2 at 0.1?C). We show that the outstanding cyclability is the result of a combination of many factors, including limited volume expansion, as supported by density functional theory calculations. This finding opens new opportunities in design of long-lasting integrated energy storage for self-powered microsystems.

| S-EPMC7320134 | biostudies-literature

Reaction temperature sensing (RTS)-based control for Li-ion battery safety.

Project description:We report reaction temperature sensing (RTS)-based control to fundamentally enhance Li-ion battery safety. RTS placed at the electrochemical interface inside a Li-ion cell is shown to detect temperature rise much faster and more accurately than external measurement of cell surface temperature. We demonstrate, for the first time, that RTS-based control shuts down a dangerous short-circuit event 3 times earlier than surface temperature- based control and prevents cell overheating by 50 °C and the resultant cell damage.

| S-EPMC4675999 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data