Browse
Submit Data
Databases
API
Help

Dataset Information

30 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Dataset of the synthesis parameters to deposit YSZ on stainless steel AISI 316L by sputtering technique.

ABSTRACT: The data presented in this article are related to the research previously published "improvement of adhesion and barrier properties of biomedical stainless steel by deposition of YSZ coatings using RF magnetron sputtering". It contains the structural, morphological, compositional and electrochemical characterization of bare AISI 316L substrate which was used as a substrate to coat with yttria-stabilized zirconia (YSZ). The chemical composition and topography analyses from X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES) and micrographs from atomic force microscopy (AFM) as well as the roughness value of the YSZ-sputtered coating on AISI 316L substrates are presented as complementary data of the article.

SUBMITTER: Sanchez-Hernandez ZE

PROVIDER: S-EPMC6811928 | biostudies-literature | 2019 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Dataset of the synthesis parameters to deposit YSZ on stainless steel AISI 316L by sputtering technique.

Sánchez-Hernández Z E ZE Domínguez-Crespo M A MA Torres-Huerta A M AM Palma-Ramírez D D Onofre-Bustamante E E Dorantes-Rosales H H Andraca-Adame J A JA

Data in brief 20190904

The data presented in this article are related to the research previously published "improvement of adhesion and barrier properties of biomedical stainless steel by deposition of YSZ coatings using RF magnetron sputtering". It contains the structural, morphological, compositional and electrochemical characterization of bare AISI 316L substrate which was used as a substrate to coat with yttria-stabilized zirconia (YSZ). The chemical composition and topography analyses from X-ray photoelectron spe ...[more]

PMID: 31667245

Similar Datasets

Interfacial Chemistry Investigation of Initial Fouling Conditions in Isocyanate Production: The Antifouling Performance of AISI 316L Stainless Steel.

Project description:The fouling of AISI 316L stainless steel during themanufacture of polymeric methylene diphenyl diisocyanate (pMDI) has been investigated. Studies have been carried out using a laboratory-based rig that simulates the process chemistry of the production plant. A variety of solution concentrations and treatment times have been employed to represent different stages in the production process. Following exposure, steel coupons have been removed and studied by X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The thickness of the fouling layer, determined by XPS, is found to vary inversely with exposure time and solution concentration. This is a result of the solubility of the different pMDI derivatives that have been formed at different stages, and a reaction scheme is developed to explain these inverse relationships. ToF-SIMS indicates the formation of metal chlorides as a result of the initial treatment of the steel in the reaction vessel with hydrogen chloride. Fragment ions characteristic of reacted and unreacted pMDI (at m/z = 106 and 132 au, respectively) were used as an indicator of the degree of reacted isocyanate groups within the fouling layer and show a decrease with increasing exposure time, as a result of the formation of intermediates such as amines, ureas, carbodiimides, and uretonimines. The ToF-SIMS data was also processed by principal component analysis (PCA). This generally reinforced the conclusions reached by XPS and ToF-SIMS but, in addition, gave confidence in the repeatability of the analyses with the repeat data (of four analyses) clustering very tightly in the PCA score plots.

| S-EPMC8515391 | biostudies-literature

Stability research on polydopamine and immobilized albumin on 316L stainless steel.

Project description:In this study, the polydopamine (PDA) film was coated on polished 316Lss and then thermally treated at 150 °C (labeled as PDA-Th150), and the stability of coatings was also investigated. Straining test indicated that PDA-Th150 coating performed better in affording sufficient adherence to 316 L SS substrate. Moreover, both PDA and PDA-Th150 coating suffered slight swelling during immersion in deionized water (pH = 6.5). X-ray photoelectron spectroscopy results showed that during immersion, latent nucleophilic reaction via amines inside PDA coating occurred. This led to an enhanced cross-linking and thus gradually promoted the coating stability. Moreover, larger amount of bovine serum albumin (BSA) was immobilized onto PDA-Th150 coating and performed well in anti-platelet adhesion. A high retention of immobilized BSA was observed even after immersion for 30 days. These tests suggested that PDA was stable enough and performed well in surface functionalization, which might enrich the research and application of PDA.

| S-EPMC5043154 | biostudies-literature

Inhibition of Bacterial Adhesion on Nanotextured Stainless Steel 316L by Electrochemical Etching.

Project description:Bacterial adhesion to stainless steel 316L (SS316L), which is an alloy typically used in many medical devices and food processing equipment, can cause serious infections along with substantial healthcare costs. This work demonstrates that nanotextured SS316L surfaces produced by electrochemical etching effectively inhibit bacterial adhesion of both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus, but exhibit cytocompatibility and no toxicity toward mammalian cells in vitro. Additionally, the electrochemical surface modification on SS316L results in formation of superior passive layer at the surface, improving corrosion resistance. The nanotextured SS316L offers significant potential for medical applications based on the surface structure-induced reduction of bacterial adhesion without use of antibiotic or chemical modifications while providing cytocompatibility and corrosion resistance in physiological conditions.

| S-EPMC5761049 | biostudies-literature

Functional Antimicrobial Surface Coatings Deposited onto Nanostructured 316L Food-Grade Stainless Steel.

Project description:In our study, we demonstrated the performance of antimicrobial coatings on properly functionalized and nanostructured 316L food-grade stainless steel pipelines. For the fabrication of these functional coatings, we employed facile and low-cost electrochemical techniques and surface modification processes. The development of a nanoporous structure on the 316L stainless steel surface was performed by following an electropolishing process in an electrolytic bath, at a constant anodic voltage of 40 V for 10 min, while the temperature was maintained between 0 and 10 °C. Subsequently, we incorporated on this nanostructure additional coatings with antimicrobial and bactericide properties, such as Ag nanoparticles, Ag films, or TiO2 thin layers. These functional coatings were grown on the nanostructured substrate by following electroless process, electrochemical deposition, and atomic layer deposition (ALD) techniques. Then, we analyzed the antimicrobial efficiency of these functionalized materials against different biofilms types (Candida parapsilosis, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and Staphylococcus epidermidis). The results of the present study demonstrate that the nanostructuring and surface functionalization processes constitute a promising route to fabricate novel functional materials exhibiting highly efficient antimicrobial features. In fact, we have shown that our use of an appropriated association of TiO2 layer and Ag nanoparticle coatings over the nanostructured 316L stainless steel exhibited an excellent antimicrobial behavior for all biofilms examined.

| S-EPMC8074267 | biostudies-literature

Formation of Nanospikes on AISI 420 Martensitic Stainless Steel under Gallium Ion Bombardment.

Project description:The focused ion beam (FIB) has proven to be an extremely powerful tool for the nanometer-scale machining and patterning of nanostructures. In this work, we experimentally study the behavior of AISI 420 martensitic stainless steel when bombarded by Ga+ ions in a FIB system. The results show the formation of nanometer sized spiky structures. Utilizing the nanospiking effect, we fabricated a single-tip needle with a measured 15.15 nanometer curvature radius and a microneedle with a nanometer sized spiky surface. The nanospikes can be made straight or angled, depending on the incident angle between the sample and the beam. We also show that the nanospiking effect is present in ferritic AISI 430 stainless steel. The weak occurrence of the nanospiking effect in between nano-rough regions (nano-cliffs) was also witnessed for austenitic AISI 316 and martensitic AISI 431 stainless steel samples.

| S-EPMC6836003 | biostudies-literature

Effect of nano-grain carbide formation on electrochemical behavior of 316L stainless steel.

Project description:The effect of low oxygen-partial pressured carburizing on relaxation process for 316L stainless steel is reported. Phase, morphology, and amount of compound formation during initial stage of carburizing are investigated using X-ray diffractometry (XRD) and X-ray photoelectron spectroscopy (XPS). The results show formation and development of surface multilayer with nano-grain-carbide (Cr7C3, Fe7C3, and/or Cr3C2) generation in the layer located below outermost protective layer. The relaxation process has been investigated using electrochemical impedance spectroscopy (EIS). Formation of nano-grain carbide(s) during carburizing causes deterioration effect on the electrochemical behavior of steel. However, the steel with large amount of carbide generation (carburized for 30 min) tends to have higher corrosion resistance (indicated by higher values of Rcl and Rct) than the smaller ones (10 and 20 min) due to the effect of phase, grain size, morphology, and amount of compound formation.

| S-EPMC8206347 | biostudies-literature

Datasets on the corrosion behaviour of nanostructured AISI 316 stainless steel treated by SMAT.

Project description:The present paper contains the experimental datasets on the corrosion behaviour of nanostructured AISI 316 stainless steel (SS) through polarization tests in 0.6 M NaCl aqueous solution at room temperature. The nanostructured layers were first obtained through surface mechanical attrition treatment (SMAT) method and the data information on the corrosion behaviour of the nanostructured layer was thereafter collected. Through potentiodynamic polarization tests and electrochemical impedance spectroscopy (EIS) studies, the experimental datasets were obtained to investigate the combined effects of SMAT and low temperature annealing on the corrosion behaviour of 316 SS. The experimental datasets obtained include the open circuit potential (OCP), corrosion current densities, corrosion potential, Nyquist, impedance and phase angle. The datasets provided in this article will be of great help to most aerospace, automobile, and manufacturing industries in determining the actual and practical corrosion behaviour of AISI 316 SS in corrosive and aggressive environment.

| S-EPMC6554219 | biostudies-literature

Reducing Staphylococcus aureus biofilm formation on stainless steel 316L using functionalized self-assembled monolayers.

Project description:Stainless steel 316L (SS316L) is a common material used in orthopedic implants. Bacterial colonization of the surface and subsequent biofilm development can lead to refractory infection of the implant. Since the greatest risk of infection occurs perioperatively, strategies that reduce bacterial adhesion during this time are important. As a strategy to limit bacterial adhesion and biofilm formation on SS316L, self-assembled monolayers (SAMs) were used to modify the SS316L surface. SAMs with long alkyl chains terminated with hydrophobic (-CH3) or hydrophilic (oligoethylene glycol) tail groups were used to form coatings and in an orthogonal approach, SAMs were used to immobilize gentamicin or vancomycin on SS316L for the first time to form an "active" antimicrobial coating to inhibit early biofilm development. Modified SS316L surfaces were characterized using surface infrared spectroscopy, contact angles, MALDI-TOF mass spectrometry and atomic force microscopy. The ability of SAM-modified SS316L to retard biofilm development by Staphylococcus aureus was functionally tested using confocal scanning laser microscopy with COMSTAT image analysis, scanning electron microscopy and colony forming unit analysis. Neither hydrophobic nor hydrophilic SAMs reduced biofilm development. However, gentamicin-linked and vancomycin-linked SAMs significantly reduced S. aureus biofilm formation for up to 24 and 48 h, respectively.

| S-EPMC3609649 | biostudies-literature

Corrosion and microstructural analysis data for AISI 316L and AISI 347H stainless steels after exposure to a supercritical water environment.

Project description:This article presents corrosion data and microstructural analysis data of austenitic stainless steels AISI 316L and AISI 347H exposed to supercritical water (25 MPa, 550 °C) with 2000 ppb of dissolved oxygen. The corrosion tests lasted a total of 1200 h but were interrupted at 600 h to allow measurements to be made. The microstructural data have been collected in the grain interior and at grain boundaries of the bulk of the materials and at the superficial oxide layer developed during the corrosion exposure.

| S-EPMC4845079 | biostudies-other

Tribological Behavior of the 316L Stainless Steel with Heterogeneous Lamella Structure.

Project description:In this paper, the tribological behavior of 316L stainless steel with heterogeneous lamella structure (HLS), prepared through 85% cold rolling technology and subsequent annealing treatment (750 °C, 10 min), were conducted on a ball-on-disc tribometer under different normal loads in dry ambient air conditions. The morphologies, structures, and compositions of the raw and worn surfaces were analyzed by 3D surface profilometer, XRD, SEM, EDS and TEM. Based on this, the results showed that the HLS 316L stainless steel samples exhibited lower and more steady friction coefficients than coarse-grained samples, especially under higher loads, which can be attributed to the existence of numerous oxidative particles across sliding interfaces. However, the wear resistance of HLS 316L stainless steel sample was a little weakened compared to that of the coarse-grained sample under a normal load of 5 N. When the load increases up to 15 N, an obviously decreased wear resistance was found for the HLS of the 316L stainless steel sample, which was 50% lower than that of coarse-grained sample. This can be ascribed to the more severe oxidative and abrasive wear performance of HLS 316L stainless steel sample under dry sliding conditions.

| S-EPMC6213424 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data