Dataset Information

Experimental Study on a Diesel Particulate Filter with Reciprocating Flow.

ABSTRACT: In this article, a new diesel particulate filter (DPF) system with reciprocating flow is proposed, and an experimental study on the characteristics of the active-passive component regeneration of the DPF system is carried out. Several control parameters such as temperature distribution, pressure difference, and pollution emissions of the DPF system are measured for different reciprocating cycles. The mechanism of reciprocating flow regeneration of the DPF system and the effects of the reciprocating flow cycle on the performance of the DPF system are analyzed. Results show that (1) the DPF system can use a tiny amount of extra fuel to maintain the chemical reaction, which in turn realizes the regeneration of the catalyzed DPF because of its properties of heat recovery and reverse blowing of ash; (2) with the increase in the reciprocating flow cycle, the temperature profile moves toward the downstream side of the DPF system and the fluctuation amplitudes of the components of CO, NO, and NO2 increase; (3) if reasonable temperature distribution is formed in the DPF system for a certain reciprocating cycle, the regeneration efficiency can be obviously improved and the average content of particulate matter emission can be kept at quite a low level.

SUBMITTER: Deng Y

PROVIDER: S-EPMC6812113 | biostudies-literature | 2019 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Experimental Study on a Diesel Particulate Filter with Reciprocating Flow.

Deng Yangbo Y Wang Xiaolong X Chen Guangquan G Wu Hongwei H Han Zhitao Z Li Rongrui R

ACS omega 20191014 17

In this article, a new diesel particulate filter (DPF) system with reciprocating flow is proposed, and an experimental study on the characteristics of the active-passive component regeneration of the DPF system is carried out. Several control parameters such as temperature distribution, pressure difference, and pollution emissions of the DPF system are measured for different reciprocating cycles. The mechanism of reciprocating flow regeneration of the DPF system and the effects of the reciprocat ...[more]

PMID: 31656882

Similar Datasets

Project description:Diesel exhaust emissions have been reported for a number of engine operating strategies, after-treatment technologies, and fuels. However, information is limited regarding emissions of many pollutants during idling and when biodiesel fuels are used. This study investigates regulated and unregulated emissions from both light-duty passenger car (1.7 L) and medium-duty (6.4 L) diesel engines at idle and load and compares a biodiesel blend (B20) to conventional ultralow sulfur diesel (ULSD) fuel. Exhaust aftertreatment devices included a diesel oxidation catalyst (DOC) and a diesel particle filter (DPF). For the 1.7 L engine under load without a DOC, B20 reduced brake-specific emissions of particulate matter (PM), elemental carbon (EC), nonmethane hydrocarbons (NMHCs), and most volatile organic compounds (VOCs) compared to ULSD; however, formaldehyde brake-specific emissions increased. With a DOC and high load, B20 increased brake-specific emissions of NMHC, nitrogen oxides (NOx), formaldehyde, naphthalene, and several other VOCs. For the 6.4 L engine under load, B20 reduced brake-specific emissions of PM2.5, EC, formaldehyde, and most VOCs; however, NOx brake-specific emissions increased. When idling, the effects of fuel type were different: B20 increased NMHC, PM2.5, EC, formaldehyde, benzene, and other VOC emission rates from both engines, and changes were sometimes large, e.g., PM2.5 increased by 60% for the 6.4 L/2004 calibration engine, and benzene by 40% for the 1.7 L engine with the DOC, possibly reflecting incomplete combustion and unburned fuel. Diesel exhaust emissions depended on the fuel type and engine load (idle versus loaded). The higher emissions found when using B20 are especially important given the recent attention to exposures from idling vehicles and the health significance of PM2.5. The emission profiles demonstrate the effects of fuel type, engine calibration, and emission control system, and they can be used as source profiles for apportionment, inventory, and exposure purposes.

Dataset Information

Experimental Study on a Diesel Particulate Filter with Reciprocating Flow.

Publications

Experimental Study on a Diesel Particulate Filter with Reciprocating Flow.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure