Dataset Information

Respiratory health and inflammatory markers - Exposure to respirable dust and quartz and chemical binders in Swedish iron foundries.

ABSTRACT: PURPOSE:To study the relationship between respirable dust, quartz and chemical binders in Swedish iron foundries and respiratory symptoms, lung function (as forced expiratory volume FEV1 and vital capacity FVC), fraction of exhaled nitric oxide (FENO) and levels of club cell secretory protein 16 (CC16) and CRP. METHODS:Personal sampling of respirable dust and quartz was performed for 85 subjects in three Swedish iron foundries. Full shift sampling and examination were performed on the second or third day of a working week after a work free weekend, with additional sampling on the fourth or fifth day. Logistic, linear and mixed model analyses were performed including, gender, age, smoking, infections, sampling day, body mass index (BMI) and chemical binders as covariates. RESULTS:The adjusted average respirable quartz and dust concentrations were 0.038 and 0.66 mg/m3, respectively. Statistically significant increases in levels of CC16 were associated with exposure to chemical binders (p = 0.05; p = 0.01) in the regression analysis of quartz and respirable dust, respectively. Non-significant exposure-responses were identified for cumulative quartz and the symptoms asthma and breathlessness. For cumulative chemical years, non-significant exposure-response were observed for all but two symptoms. FENO also exhibited a non significant exposure-response for both quartz and respirable dust. No exposure-response was determined for FEV1 or FVC, CRP and respirable dust and quartz. CONCLUSIONS:Our findings suggest that early markers of pulmonary effect, such as increased levels of CC16 and FENO, are more strongly associated with chemical binder exposure than respirable quartz and dust in foundry environments.

SUBMITTER: Andersson L

PROVIDER: S-EPMC6824619 | biostudies-literature | 2019

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Respiratory health and inflammatory markers - Exposure to respirable dust and quartz and chemical binders in Swedish iron foundries.

Andersson Lena L Bryngelsson Ing-Liss IL Hedbrant Alexander A Persson Alexander A Johansson Anders A Ericsson Annette A Lindell Ina I Stockfelt Leo L Särndahl Eva E Westberg Håkan H

PloS one 20191101 11

<h4>Purpose</h4>To study the relationship between respirable dust, quartz and chemical binders in Swedish iron foundries and respiratory symptoms, lung function (as forced expiratory volume FEV1 and vital capacity FVC), fraction of exhaled nitric oxide (FENO) and levels of club cell secretory protein 16 (CC16) and CRP.<h4>Methods</h4>Personal sampling of respirable dust and quartz was performed for 85 subjects in three Swedish iron foundries. Full shift sampling and examination were performed on ...[more]

PMID: 31675355

Similar Datasets

Project description:In order to help reduce silicosis in miners, the National Institute for Occupational Health and Safety (NIOSH) is developing field-portable methods for measuring airborne respirable crystalline silica (RCS), specifically the polymorph α-quartz, in mine dusts. In this study we demonstrate the feasibility of end-of-shift measurement of α-quartz using a direct-on-filter (DoF) method to analyze coal mine dust samples deposited onto polyvinyl chloride filters. The DoF method is potentially amenable for on-site analyses, but deviates from the current regulatory determination of RCS for coal mines by eliminating two sample preparation steps: ashing the sampling filter and redepositing the ash prior to quantification by Fourier transform infrared (FT-IR) spectrometry. In this study, the FT-IR spectra of 66 coal dust samples from active mines were used, and the RCS was quantified by using: (1) an ordinary least squares (OLS) calibration approach that utilizes standard silica material as done in the Mine Safety and Health Administration's P7 method; and (2) a partial least squares (PLS) regression approach. Both were capable of accounting for kaolinite, which can confound the IR analysis of silica. The OLS method utilized analytical standards for silica calibration and kaolin correction, resulting in a good linear correlation with P7 results and minimal bias but with the accuracy limited by the presence of kaolinite. The PLS approach also produced predictions well-correlated to the P7 method, as well as better accuracy in RCS prediction, and no bias due to variable kaolinite mass. Besides decreased sensitivity to mineral or substrate confounders, PLS has the advantage that the analyst is not required to correct for the presence of kaolinite or background interferences related to the substrate, making the method potentially viable for automated RCS prediction in the field. This study demonstrated the efficacy of FT-IR transmission spectrometry for silica determination in coal mine dusts, using both OLS and PLS analyses, when kaolinite was present.

Project description:Mine workers are occupationally exposed to respirable dust, which can cause irreversible lung diseases and controlling exposure concentrations to as low as reasonably practicable is, therefore, essential. To implement exposure reduction strategies and adequately manage exposure to hazardous chemicals, exposure needs to be measured and recorded according to a standard exposure management plan. This study aimed to assess the available respirable dust exposure data measured between 2017 and 2022 in various work areas and job categories at two mining shafts and a concentrator plant of a Zambian copper mine. Additionally, the monitoring program implemented at the mine was assessed for appropriateness. Descriptive data analysis was used to create an exposure matrix comprising 253 exposure measurements. Approximately 5.6% of the measured concentrations exceeded the South African time-weighted average occupational exposure limit (TWA-OEL) of 3 mg/m3. The geometric means of respirable dust exposure for shaft A, shaft B and the concentrator plant were 0.44 mg/m3, 0.44 mg/m3, and 0.68 mg/m3, respectively. The work areas with the highest maximum exposure results were the tipping area (18.0 mg/m3) at shaft A, the sump and waste bin (8.05 mg/m3) at shaft B and the screening (10.8 mg/m3), secondary crusher (14.0 mg/m3), foreign ore bin (4.43 mg/m3), and tertiary crusher (5.07 mg/m3) areas at the concentrator plant. It was found that the monitoring strategy implemented at the mine was flawed and did not collect a sufficient number of samples in each area during each year to make rigorous statistical assessment possible. This study highlights the sampling strategy's shortcomings and recommends adopting a standardized monitoring strategy, such as EN689, to improve the respirable dust monitoring program at the mine. Additionally, this strategy can be implemented across Zambia and, if implemented correctly, it has the potential to be improve exposure monitoring across the country as no standard sampling strategy is currently enforced by the Government.

Project description:Per- and polyfluoroalkyl substances (PFASs) are used in a wide range of products and have been found ubiquitously in our indoor environment, and there is evidence that exposure to PFAS can lead to adverse endocrine effects, such as thyroid hormone disruption. Pet cats have a high dust intake due to their grooming behavior and have been shown to be a suitable sentinel species for assessment of toddler's exposure. Here we used paired household dust (n=46) and cat serum (n=27) samples to establish whether dust is a relevant exposure pathway to PFASs. An analytical method for PFAS analysis was optimized using a low volume of cat serum samples, combining solid-phase extraction and online sample cleanup. Dust was extracted with methanol by sonication and cleaned up by addition of active carbon. In total, 27 PFASs were analyzed by liquid chromatography/mass spectrometry analysis. The correlation between PFAS levels in dust and serum, serum lipids and thyroid hormone levels, and PFAS levels in dust between different rooms were statistically evaluated. PFOS and PFDA could be quantified in all cat serum samples (median 2300 pg/mL and 430 pg/mL, respectively), followed by PFOA (median 1100 pg/mL), quantified in 96% of the samples. The levels of 6:2 and 8:2 diPAPs were determined in 65% and 92% of the serum samples, respectively, and were an order of magnitude lower (1.4-160 pg/mL). Household dust on the other hand was dominated by 6:2 and 8:2 diPAPs, with a median of 65 ng/g dust and 49 ng/g dust, respectively. PFOS (median 13 ng/g dust) and PFOA (median 9 ng/g dust) were quantified in 93% of the dust samples. Only eight PFASs were detected (>LOD) in at least 50% of the samples of both matrices and could be paired. Significant correlations between cat serum and dust were found for PFOA (rS=0.32, p<0.049) and PFUnDA (rS=0.55, p<0.001). Significant positive correlations were found between serum total thyroxine (rS=0.11, p<0.05) and PFNA and between serum cholesterol and PFHpA (rS=0.46, p<0.01), PFUnDA (rS=0.40, p<0.05), PFDoDA (rS=0.44, p<0.01), and sum PFAS (rS=0.48, p<0.01). In conclusion, this study confirmed that dust is a relevant exposure pathway for the ingestion of some PFASs for cats, and the serum levels of PFASs could be of relevance for the cat's health.

Dataset Information

Respiratory health and inflammatory markers - Exposure to respirable dust and quartz and chemical binders in Swedish iron foundries.

Publications

Respiratory health and inflammatory markers - Exposure to respirable dust and quartz and chemical binders in Swedish iron foundries.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets