Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Electrodeposition of Nanoparticles and Continuous Film of CdSe on n-Si (100).

ABSTRACT: CdSe electrodeposition on n-Si (100) substrate was investigated in sulfuric acid solution. The behaviour and the deposition of the precursors (Cd and Se) were studied separately at first. Then, we explored both the alternated deposition, one layer by one, as well as the simultaneous co-deposition of the two elements to form the CdSe semiconductor. Varying the deposition conditions, we were able to obtain nanoparticles, or a thin film, on the surface of the electrode. The samples were then characterised microscopically and spectroscopically with SEM, XRD and XPS. Finally, we evaluated the induced photoemission of the deposit for the application in optoelectronics.

SUBMITTER: Giurlani W

PROVIDER: S-EPMC6835584 | biostudies-literature | 2019 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Electrodeposition of Nanoparticles and Continuous Film of CdSe on n-Si (100).

Giurlani Walter W Dell'Aquila Vincenzo V Vizza Martina M Calisi Nicola N Lavacchi Alessandro A Irrera Alessia A Lo Faro Maria Josè MJ Leonardi Antonio Alessio AA Morganti Dario D Innocenti Massimo M

Nanomaterials (Basel, Switzerland) 20191022 10

CdSe electrodeposition on n-Si (100) substrate was investigated in sulfuric acid solution. The behaviour and the deposition of the precursors (Cd and Se) were studied separately at first. Then, we explored both the alternated deposition, one layer by one, as well as the simultaneous co-deposition of the two elements to form the CdSe semiconductor. Varying the deposition conditions, we were able to obtain nanoparticles, or a thin film, on the surface of the electrode. The samples were then charac ...[more]

PMID: 31652606

Similar Datasets

Scalable, highly stable Si-based metal-insulator-semiconductor photoanodes for water oxidation fabricated using thin-film reactions and electrodeposition.

Project description:Metal-insulator-semiconductor (MIS) structures are widely used in Si-based solar water-splitting photoelectrodes to protect the Si layer from corrosion. Typically, there is a tradeoff between efficiency and stability when optimizing insulator thickness. Moreover, lithographic patterning is often required for fabricating MIS photoelectrodes. In this study, we demonstrate improved Si-based MIS photoanodes with thick insulating layers fabricated using thin-film reactions to create localized conduction paths through the insulator and electrodeposition to form metal catalyst islands. These fabrication approaches are low-cost and highly scalable, and yield MIS photoanodes with low onset potential, high saturation current density, and excellent stability. By combining this approach with a p+n-Si buried junction, further improved oxygen evolution reaction (OER) performance is achieved with an onset potential of 0.7 V versus reversible hydrogen electrode (RHE) and saturation current density of 32 mA/cm2 under simulated AM1.5G illumination. Moreover, in stability testing in 1 M KOH aqueous solution, a constant photocurrent density of ~22 mA/cm2 is maintained at 1.3 V versus RHE for 7 days.

| S-EPMC8233328 | biostudies-literature

Reaction of Dichlorophenylborane with H-Si(100).

Project description:Traditional approaches to achieving dopant functionalized Si involve grafting the dopant to the Si substrates through O-Si or C-Si bonds, resulting in indirect attachment of the dopant to the Si. Recently, ultrahigh vacuum work has demonstrated that high densities of direct B-Si bonds enable unprecedented electronic behaviors in Si that make it possible for Si to be used as a next-generation electronic material. As solvothermal approaches are inherently amenable to scale-up, there is currently a push to develop solvothermal approaches for the formation of direct dopant-Si bonds. Thus far, B-Si chemistries for next-generation electronic materials have been demonstrated with boron trichloride and bis(pinacolatodiboron). In this work, we use a combination of experimental work and computational studies to examine the reactivity of a phenyl derivatized boron trichloride, namely dichlorophenylborane, with H-Si(100). We determine that despite the stability and ease for the formation of C-Si bonds, the organic component, the phenyl group remains attached to the B and does not yield competitive formation of products via a Si-C bond. This reaction proved a new solvothermal method for the formation of direct B-Si bonds that, with further work, can be leveraged in developing next-generation electronic materials.

| S-EPMC8675003 | biostudies-literature

One-Step Co-Electrodeposition of Copper Nanoparticles-Chitosan Film-Carbon Nanoparticles-Multiwalled Carbon Nanotubes Composite for Electroanalysis of Indole-3-Acetic Acid and Salicylic Acid.

Project description:A sensitive simultaneous electroanalysis of phytohormones indole-3-acetic acid (IAA) and salicylic acid (SA) based on a novel copper nanoparticles-chitosan film-carbon nanoparticles-multiwalled carbon nanotubes (CuNPs-CSF-CNPs-MWCNTs) composite was reported. CNPs were prepared by hydrothermal reaction of chitosan. Then the CuNPs-CSF-CNPs-MWCNTs composite was facilely prepared by one-step co-electrodeposition of CuNPs and CNPs fixed chitosan residues on modified electrode. Scanning electron microscope (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and linear sweep voltammetry (LSV) were used to characterize the properties of the composite. Under optimal conditions, the composite modified electrode had a good linear relationship with IAA in the range of 0.01-50 μM, and a good linear relationship with SA in the range of 4-30 μM. The detection limits were 0.0086 μM and 0.7 μM (S/N = 3), respectively. In addition, the sensor could also be used for the simultaneous detection of IAA and SA in real leaf samples with satisfactory recovery.

| S-EPMC9228024 | biostudies-literature

Architectural growth of cu nanoparticles through electrodeposition.

Project description:Cu particles with different architectures such as pyramid, cube, and multipod have been successfully fabricated on the surface of Au films, which is the polycrystalline Au substrate with (111) domains, using the electrodeposition technique in the presence of the surface-capping reagents of dodecylbenzene sulfonic acid and poly(vinylpyrrolidone). Further, the growth evolution of pyramidal Cu nanoparticles was observed for the first time. We believe that our method might open new possibilities for fabricating nanomaterials of non-noble transition metals with various novel architectures, which can then potentially be utilized in applications such as biosensors, catalysis, photovoltaic cells, and electronic nanodevices.

| S-EPMC2893912 | biostudies-literature

Fast electrodeposition of zinc onto single zinc nanoparticles.

Project description:The zinc deposition reaction onto metallic zinc has been investigated at the single particle level through the electrode-particle collision method in neutral solutions, and in respect of its dependence on the applied potential and the ionic strength of a sulphate-containing solution. Depending on the concentration of sulphate ions in solution, different amounts of metallic zinc were deposited on the single Zn nanoparticles. Specifically, insights into the electron transfer kinetics at the single particles were obtained, indicating an electrically early reactant-like transition state, which is consistent with the rate-determining partial de-hydration/de-complexation process. Such information on the reaction kinetics at the nanoscale is of vital importance for the development of more efficient and long-lasting nanostructured Zn-based negative electrodes for Zn-ion battery applications.

| S-EPMC7561586 | biostudies-literature

Electrodeposition of amorphous molybdenum sulfide thin film for electrochemical hydrogen evolution reaction.

Project description:Amorphous molybdenum sulfide (MoSx) is a highly active noble-metal-free electrocatalysts for the hydrogen evolution reaction (HER). The MoSx was prepared by electrochemical deposition at room temperature. Low-cost precursors of Mo and S were adopted to synthesize thiomolybdates solution as the electrolyte. It replaces the expensive (NH)2MoS4 and avoid the poison gas (H2S) to generate or employ. The (MoO2S2)2-, (MoOS3)2- and (MoS4)2- ions were determined by UV-VIS spectroscopy. The electrodeposition of MoSx was confirmed with XRD, XPS and SEM. The electrocatalyst activity was measured by polarization curve. The electrolyte contained (MoO2S2)2- ion and (MoOS3)2- ion electrodeposit the MoSx thin film displays a relatively high activity for HER with low overpotential of 211 mV at a current density of 10 mA cm-2, a relatively high current density of 21.03 mA cm-2 at η = 250 mV, a small Tafel slope of 55 mV dec-1. The added sodium dodecyl sulfate (SDS) can efficient improve the stability of the MoSx film catalyst.

| S-EPMC6661953 | biostudies-literature

Structural and Magnetic Properties of FePd Thin Film Synthesized by Electrodeposition Method.

Project description:Bimetallic nanomaterials in the form of thin film constituted by magnetic and noble elements show promising properties in different application fields such as catalysts and magnetic driven applications. In order to tailor the chemical and physical properties of these alloys to meet the applications requirements, it is of great importance scientific interest to study the interplay between properties and morphology, surface properties, microstructure, spatial confinement and magnetic features. In this manuscript, FePd thin films are prepared by electrodeposition which is a versatile and widely used technique. Compositional, morphological, surface and magnetic properties are described as a function of deposition time (i.e., film thickness). Chemical etching in hydrochloric acid was used to enhance the surface roughness and help decoupling crystalline grains with direct consequences on to the magnetic properties. X-ray diffraction, SEM/AFM images, contact angle and magnetic measurements have been carried out with the aim of providing a comprehensive characterisation of the fundamental properties of these bimetallic thin films.

| S-EPMC7142880 | biostudies-literature

Graphene growth on Ge(100)/Si(100) substrates by CVD method.

Project description:The successful integration of graphene into microelectronic devices is strongly dependent on the availability of direct deposition processes, which can provide uniform, large area and high quality graphene on nonmetallic substrates. As of today the dominant technology is based on Si and obtaining graphene with Si is treated as the most advantageous solution. However, the formation of carbide during the growth process makes manufacturing graphene on Si wafers extremely challenging. To overcome these difficulties and reach the set goals, we proposed growth of high quality graphene layers by the CVD method on Ge(100)/Si(100) wafers. In addition, a stochastic model was applied in order to describe the graphene growth process on the Ge(100)/Si(100) substrate and to determine the direction of further processes. As a result, high quality graphene was grown, which was proved by Raman spectroscopy results, showing uniform monolayer films with FWHM of the 2D band of 32 cm(-1).

| S-EPMC4761869 | biostudies-other

Pressure compression of CdSe nanoparticles into luminescent nanowires.

Project description:Oriented attachment (OA) of synthetic nanocrystals is emerging as an effective means of fabricating low-dimensional nanoscale materials. However, OA relies on energetically favorable nanocrystal facets to grow nanostructured materials. Consequently, nanostructures synthesized through OA are generally limited to a specific crystal facet in their final morphology. We report our discovery that high-pressure compression can induce consolidation of spherical CdSe nanocrystal arrays, leading to unexpected one-dimensional semiconductor nanowires that do not exhibit the typical crystal facet. In particular, in situ high-pressure synchrotron x-ray scattering, optical spectroscopy, and high-resolution transmission electron microscopy characterizations indicate that by manipulating the coupling between nanocrystals through external pressure, a reversible change in nanocrystal assemblies and properties can be achieved at modest pressure. When pressure is increased above a threshold, these nanocrystals begin to contact one another and consolidate, irreversibly forming one-dimensional luminescent nanowires. High-fidelity molecular dynamics (MD) methods were used to calculate surface energies and simulate compression and coalescence mechanisms of CdSe nanocrystals. The MD results provide new insight into nanowire assembly dynamics and phase stability of nanocrystalline structures.

| S-EPMC5419700 | biostudies-literature

Luminescence Change of CdS and CdSe Quantum Dots on a Ag Film.

Project description:Enhanced luminescence of an emitter on a Ag film is usually ascribed to the resonant surface plasmons. In these studies, the solid cadmium sulfide (CdS) and cadmium selenide (CdSe) quantum dot/silver (QD/Ag) hybrids were prepared, and the luminescence characteristics of these QD/Ag hybrids were measured. It is found that the enhancement of the trap state emission (TSE) is related to the QD size. The TSE features of the annealed QD/Ag hybrids are insensitive to the morphology of the Ag film. We used the wet and dry methods to separate the QD and Ag components and found that the photoluminescence (PL) of the QD component was permanently changed from the initial state. The PL modification is ascribed to the Ag+ doping effect rather than the surface plasmons. This doping method uses pure Ag as the Ag+ ion source. In this case, though the CdS and CdSe QD/Ag hybrids are the solid state, the cation exchange between Ag+ and Cd2+ ions can still occur on the QD surface. Even a small amount of Ag can efficiently influence the luminescence of the QDs embedded in the poly(methyl methacrylate) matrix. A hypothetical model was proposed to explain the PL modification of the QD/Ag hybrid with and without annealing. Using this dry method for doping, the transparent luminescence label can be prepared easily, and the doped QDs can be further doped with Ag+ dopants.

| S-EPMC6732985 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data