Dataset Information

Utility of an image fusion system for 3D preoperative planning and fluoroscopy in the osteosynthesis of distal radius fractures.

ABSTRACT: BACKGROUND:Recently, computerized virtual surgery planning has been increasingly applied in various orthopedic procedures. In this study, we developed an image fusion system for 3D preoperative planning and fluoroscopy for the osteosynthesis. To assess the utility of image fusion system, we evaluated the reproducibility of preoperative planning in the osteosynthesis of distal radius fractures with using the image fusion system, and compared with the reproducibility of the patients without using the image fusion system. METHODS:Forty-two wrists of 42 distal radius fracture patients who underwent osteosynthesis using volar locking plates were evaluated. The patients were divided into two groups. Image fusion group utilized three-dimensional (3D) preoperative planning and image fusion system. Control group utilized only 3D preoperative planning. In both groups, 3D preoperative planning was performed in order to determine reduction, placement, and choice of implants. In the image fusion group, the outline of planned image was displayed on a monitor overlapping with fluoroscopy images during surgery. Reductions were evaluated by volar tilt and radial inclination of 3D images. Plate positions were evaluated with distance to joint surface, plate center axis position, and inclination relative to the radius axis. Screw choices were recorded for the plan and actual choices for each screw hole. Differences in the parameters between pre- and postoperative images were evaluated. Differences in reduction shape, plate positions, and screw choices were compared between groups. RESULTS:The differences in the distance from plate to joint surface were significantly smaller in the image fusion group compared to the control group (P?

SUBMITTER: Yoshii Y

PROVIDER: S-EPMC6836429 | biostudies-literature | 2019 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Utility of an image fusion system for 3D preoperative planning and fluoroscopy in the osteosynthesis of distal radius fractures.

Yoshii Yuichi Y Totoki Yasukazu Y Sashida Satoshi S Sakai Shinsuke S Ishii Tomoo T

Journal of orthopaedic surgery and research 20191106 1

<h4>Background</h4>Recently, computerized virtual surgery planning has been increasingly applied in various orthopedic procedures. In this study, we developed an image fusion system for 3D preoperative planning and fluoroscopy for the osteosynthesis. To assess the utility of image fusion system, we evaluated the reproducibility of preoperative planning in the osteosynthesis of distal radius fractures with using the image fusion system, and compared with the reproducibility of the patients withou ...[more]

PMID: 31694677

Similar Datasets

Project description:BackgroundThree-dimensional preoperative planning was applied for the osteosynthesis of distal radius fractures. The objective of this study was to evaluate the reproducibility of three-dimensional preoperative planning for the osteosynthesis of distal radius fractures with three-dimensional reference points.MethodsSixty-three wrists of 63 distal radius fracture patients who underwent osteosynthesis with three-dimensional preoperative planning were evaluated. After taking preoperative CT scans of the injured wrists, 3D images of the distal radius were created. Fracture reduction, implants choices, and placements simulation were performed based on the 3D images. One month after the surgery, postoperative CT images were taken. The reproducibility was evaluated with preoperative plan and postoperative 3D images. The images were compared with the three-dimensional coordinates of radial styloid process, volar and dorsal edges of sigmoid notch, and the barycentric coordinates of the three reference points. The reproducibility of the preoperative plan was evaluated by the distance of the coordinates between the plan and postoperative images for the reference points. The reproducibility of radial inclination and volar tilt on three-dimensional images were evaluated by intra-class correlation coefficient (ICC).ResultsThe distances between the preoperative plan and the postoperative reduction for each reference point were (1) 2.1±1.3 mm, (2) 1.9±1.2 mm, and (3) 1.9±1.2 mm, respectively. The distance between the preoperative plan and postoperative reduction for the barycentric coordinate was 1.3±0.8 mm. ICCs were 0.54 and 0.54 for the volar tilt and radial inclination, respectively (P<0.01).ConclusionsThree-dimensional preoperative planning for the osteosynthesis of distal radius fracture was reproducible with an error of about 2 mm for each reference point and the correlations of reduction shapes were moderate. The analysis method and reference points may be helpful to understand the accuracy of reductions for the three-dimensional preoperative planning in the osteosynthesis of distal radius fractures.Trial registrationRegistered as NCT02909647 at ClinicalTrials.gov.

Project description:BackgroundTo provide surgical support for corrective osteotomy, we developed an image fusion system for three-dimensional (3D) preoperative planning and fluoroscopy. To assess the utility of this image fusion system, we evaluated the reproducibility of preoperative planning for corrective osteotomy of dorsally angulated distal radius malunion using the system and compared reproducibility without using the system.MethodsTen wrists from 10 distal radius malunion patients who underwent corrective osteotomy were evaluated. 3D preoperative planning and the image fusion system were used for the image fusion group (n = 5). Only 3D preoperative planning was used for the control group (n = 5). 3D preoperative planning was performed for both groups in order to assess reduction, placement, and the choice of implants. In the image fusion group, the outline of the planned image was displayed on a monitor and overlapped with fluoroscopy images during surgery. Reproducibility was evaluated using preoperative plan and postoperative 3D images. Images were compared with the 3D coordinates of the radial styloid process (1), the volar and dorsal edges of the sigmoid notch (2) (3), and the barycentric coordinates of the three reference points. The reproducibility of the preoperative plan was evaluated by the distance of the coordinates between the plan and postoperative images for the reference points.ResultsThe distances between preoperative planning and postoperative reduction in the image fusion group were 2.1 ± 1.1 mm, 1.8 ± 0.7 mm, 1.9 ± 0.9 mm, and 1.4 ± 0.7 mm for reference points (1), (2), (3), and the barycenter, respectively. The distances between preoperative planning and postoperative reduction in the control group were 3.7 ± 1.0 mm, 2.8 ± 2.0 mm, 1.7 ± 0.8 mm, and 1.8 ± 1.2 mm for reference points (1), (2), (3), and the barycenter, respectively. The difference in reference point (1) was significantly smaller in the image fusion group than in the control group (P < 0.05).ConclusionCorrective osteotomy using an image fusion system will become a new surgical support method for fracture malunion. Trial registration Registered as NCT03764501 at ClinicalTrials.gov.

Project description:For accurate analysis of bone formation and resorption during fracture healing, correct registration of follow-up onto baseline image is required. A per-fragment approach could improve alignment compared to standard registration based on the whole fractured region. In this exploratory study, we tested the effect of fragment size and displacement on a per-fragment registration, and compared the results of this per-fragment registration to the results of the standard registration in two stable fractures and one unstable fracture. To test the effect of fragment size and displacement, high-resolution peripheral quantitative computed tomography (HR-pQCT) scans of three unfractured radii were divided into subvolumes. Different displacements in x-, y, or z-direction or rotations around each axis were applied, and each subvolume was registered onto the initial volume to realign it. Next, registration of follow-up onto baseline scan was performed in two stable and one unstable fracture. After coarsely aligning the follow-up onto the baseline scan, a more accurate registration was performed of the whole fracture, i.e. the standard registration, and of each fracture fragment separately, i.e. per-fragment registration. Alignment was checked using overlay images showing baseline, follow-up and overlap between these scans, and by comparing correlation coefficients between the standard and per-fragment registration. Generally, subvolumes as small as 300 mm3 that were displaced up to 0.82 mm in x- or y-, or up to 1.64 mm in z-direction could be realigned correctly. For the fragments of all fractures, correlation coefficients were higher after per-fragment registration compared to standard registration. Most improvement was found in the unstable fracture and one fragment of the unstable fracture did not align correctly. This exploratory study showed that image registration of individual subvolumes, such as fracture fragments, is feasible in both stable and unstable fractures, and leads to better alignment of these fragments compared to an approach that is based on registration using the whole fractured region. This result is promising for additional analysis of bone formation and resorption in HR-pQCT studies on fracture healing.

Dataset Information

Utility of an image fusion system for 3D preoperative planning and fluoroscopy in the osteosynthesis of distal radius fractures.

Publications

Utility of an image fusion system for 3D preoperative planning and fluoroscopy in the osteosynthesis of distal radius fractures.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets