Application of MALDI-TOF MS to rapid identification of anaerobic bacteria.
Ontology highlight
ABSTRACT:
SUBMITTER: Li Y
PROVIDER: S-EPMC6836477 | biostudies-literature | 2019 Nov
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:BACKGROUND:Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) is an accurate, rapid and inexpensive technique that has initiated a revolution in the clinical microbiology laboratory for identification of pathogens. The Vitek 2 anaerobe and Corynebacterium (ANC) identification card is a newly developed method for identification of corynebacteria and anaerobic species. The aim of this study was to evaluate the effectiveness of the ANC card and MALDI-TOF MS techniques for identification of clinical anaerobic isolates. METHODS:Five reference strains and a total of 50 anaerobic bacteria clinical isolates comprising ten different genera and 14 species were identified and analyzed by the ANC card together with Vitek 2 identification system and Vitek MS together with version 2.0 database respectively. 16S rRNA gene sequencing was used as reference method for accuracy in the identification. RESULTS:Vitek 2 ANC card and Vitek MS provided comparable results at species level for the five reference strains. Of 50 clinical strains, the Vitek MS provided identification for 46 strains (92%) to the species level, 47 (94%) to genus level, one (2%) low discrimination, two (4%) no identification and one (2%) misidentification. The Vitek 2 ANC card provided identification for 43 strains (86%) correct to the species level, 47 (94%) correct to the genus level, three (6%) low discrimination, three (6%) no identification and one (2%) misidentification. CONCLUSIONS:Both Vitek MS and Vitek 2 ANC card can be used for accurate routine clinical anaerobe identification. Comparing to the Vitek 2 ANC card, Vitek MS is easier, faster and more economic for each test. The databases currently available for both systems should be updated and further developed to enhance performance.
| S-EPMC4015004 | biostudies-literature
Project description:Truffles are edible mushrooms with similar morphological characteristics, that make it difficult to distinguish between highly prized truffles (such as the Périgord black T. melanosporum) and inexpensive truffles (such as the Asian Black T. indicum). These biological and economic features have led to several misidentifications and/or fraudulent profit in the truffle markets. In this paper, we investigate Matrix-assisted Laser Desorption/Ionization Time-Of-Flight Mass Spectrometry (MALDI-TOF MS) biotyping to identify 34 commercial fresh truffles from Europe and Asia. The MALDI-TOF MS clustering rapidly distinguished seven Tuber species identified by ITS phylogenetic analysis. The tasty T. melanosporum was clearly differentiated from the Chinese and less expensive truffles. These cheaper mushrooms were marketed as T. indicum but corresponded to a mix of three species. In total, the method confirmed misidentifications in 26% of commercial specimens. Several unknown blind-coded truffles were rapidly identified, with scores >= 2, using the Bruker Biotyper algorithm against MS databases. This study demonstrates that MALDI-TOF MS is a reliable, rapid and cheaper new tool compared with molecular methods for the identification of truffle species and could be used to control frauds in the truffle markets. It could also be useful for the certification of truffle-inoculated seedlings and/or diversity in forest ecosystems.
| S-EPMC6881316 | biostudies-literature
Project description:Candida auris was first reported in an ear swab from Japan in 2009; it then promptly spread over five continents and turned into a global nosocomial problem. The main challenges faced by many researchers are the mis-identification by conventional methods in clinical laboratories and failure in treatment. About 90% of C. auris strains are intrinsically resistant to fluconazole (FLU), and it is developing resistance to multiple classes of available antifungals. Echinocandins are the most potent class of antifungals against C. auris; however, reduced susceptibility to one or many echinocandin drugs has been recently observed. Thus, the main issues addressed in this paper are the fast and accurate identification of C. auris derived from Sabouraud dextrose agar and blood culture bottles as well as the rapid antifungal susceptibility test by MALDI-TOF MS. This study successfully identified all isolates of C. auris (n = 50) by MALDI-TOF MS, with an average log score of ? 2. An accuracy of 100% was found on both agar plate and blood culture bottles. MALDI Biotyper antibiotic susceptibility test-rapid assay (MBT ASTRA) was used for rapid antifungal susceptibility testing (AFST). A comparison between MBT ASTRA and the Clinical and Laboratory Standards Institute guidelines (CLSI) detected a sensitivity and specificity of 100% and 98% for anidulafungin, and 100% and 95.5% for micafungin, respectively. A categorical agreement of 98% and 96% was calculated for the two methods. For caspofungin, sensitivity and specificity of 100 and 73% were found, respectively, with a categorical agreement of 82%. MBT ASTRA has the great potential to detect C. auris isolates non-susceptible against echinocandin antifungals within 6 h, which makes it a promising candidate for AFST in clinical laboratories in the future.
| S-EPMC6387932 | biostudies-literature
Project description:The present study aimed to evaluate the applicability of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) for identifying filamentous fungi and assessing the in vitro activities of common antifungal drugs against different kinds of filamentous fungi that are commonly encountered in a clinical setting. A total of 123 strains of filamentous fungi (24 species) were submitted for identification by MALDI-TOF MS, and the findings were compared with those obtained by conventional methods. The discrepancies were further investigated by internal transcribed spacer (ITS) sequence analysis. Then, 79 strains were randomly selected for further testing by the minimum inhibitory concentration Etest method. MALDI-TOF MS correctly identified 114 (92.70%) of the 123 filamentous fungi and failed to identify six isolates (4.9%). By contrast, the conventional identification methods made 113 (91.9%) correct identifications. In addition, 15 isolates of filamentous fungi were further identified by ribosomal DNA-ITS sequencing. In the in vitro antifungal susceptibility test, voriconazole showed the strongest antifungal activity among the tested drugs against a broad range of filamentous fungi. Caspofungin showed a better in vitro antifungal activity than fluconazole, itraconazole, and amphotericin B. MALDI-TOF MS offers a cost/time-saving, high-throughput and accurate working protocol for identifying filamentous fungi. Voriconazole could still serve as the first-line drug for treating serious infections caused by filamentous fungi, while caspofungin may be another treatment option for fungal infections.
| S-EPMC6895777 | biostudies-literature
Project description:This data in brief article presents the data obtained during the validation of the optimized Biotyper Matrix Assisted Laser Desorption Ionization Time-of-Flight Mass Spectrometry (MALDI-TOF MS) database. The validation was performed by the different expertise laboratories, collaborating within the European Network for the Rapid Identification of Anaerobes (ENRIA) project, using 6309 human clinical anaerobic bacterial strains. Different databases were compared with each other; the db 5989 database (V5 database); the V5 database complimented with Main Spectral Profiles (MSPs) of ENRIA strains added to the next update of the database; and the V5 database complimented with the MSPs of all anaerobic clinical isolates collected within the ENRIA project. For a comprehensive discussion of the full dataset, please see the research article that accompanies this data article (Veloo et al., 2018) [1].
| S-EPMC5998164 | biostudies-literature
Project description:Matrix-assisted laser desorption-ionization-time-of-flight mass spectrometry (MALDI-TOF MS) was used to establish a rapid, simple, and accurate method to differentiate among strains of Microcystis aeruginosa, one of the most prevalent types of bloom-forming cyanobacteria. M. aeruginosa NIES-843, for which a complete genome has been sequenced, was used to characterize ribosomal proteins as biomarkers and to optimize conditions for observing ribosomal proteins as major peaks in a given mass spectrum. Thirty-one of 52 ribosomal subunit proteins were detected and identified along the mass spectrum. Fifty-five strains of M. aeruginosa from different habitats were analyzed using MALDI-TOF MS; among these samples, different ribosomal protein types were observed. A polygenetic analysis was performed using an unweighted pair-group method with arithmetic means and different ribosomal protein types to classify the strains into five major clades. Two clades primarily contained toxic strains, and the other three clades contained exclusively non-toxic strains. This is the first study to differentiate cyanobacterial strains using MALDI-TOF MS.
| S-EPMC4881969 | biostudies-literature
Project description:BackgroundIn the last decade, an innovative approach has emerged for arthropod identification based on matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS). Increasing interest in applying the original technique for arthropod identification has led to the development of a variety of procedures for sample preparation and selection of body parts, among others. However, the absence of a consensual strategy hampers direct inter-study comparisons. Moreover, these different procedures are confusing to new users. Establishing optimized procedures and standardized protocols for mosquito identification by MALDI-TOF MS is therefore a necessity, and would notably enable the sharing of reference MS databases. Here, we assess the optimal conditions for mosquito identification using MALDI-TOF MS profiling.MethodsThree homogenization methods, two of which were manual and one automatic, were used on three distinct body parts (legs, thorax, head) of two mosquito laboratory strains, Anopheles coluzzii and Aedes aegypti, and the results evaluated. The reproducibility of MS profiles, identification rate with relevant scores and the suitability of procedures for high-throughput analyses were the main criteria for establishing optimized guidelines. Additionally, the consequences of blood-feeding and geographical origin were evaluated using both laboratory strains and field-collected mosquitoes.ResultsRelevant score values for mosquito identification were obtained for all the three body parts assayed using MALDI-TOF MS profiling; however, the thorax and legs were the most suitable specimens, independently of homogenization method or species. Although the manual homogenization methods were associated with a high rate of identification on the three body parts, this homogenization mode is not adaptable to the processing of a large number of samples. Therefore, the automatic homogenization procedure was selected as the reference homogenization method. Blood-feeding status did not hamper the identification of mosquito species, despite the presence of MS peaks from original blood in the MS profiles of the three body parts tested from both species. Finally, a significant improvement in identification scores was obtained for field-collected specimens when MS spectra of species from the same geographical area were added to the database.ConclusionThe results of the current study establish guidelines for the selection of mosquito anatomic parts and modality of sample preparation (e.g. homogenization) for future specimen identification by MALDI-TOF MS profiling. These standardized operational protocols could be used as references for creating an international MS database.
| S-EPMC9248115 | biostudies-literature
Project description:Because of the special culture requirements of anaerobic bacteria, their low growth-rate and the difficulties to isolate them, MALDI-TOF MS has become a reliable identification tool for these microorganisms due to the little amount of bacteria required and the accuracy of MALDI-TOF MS identifications. In this study, the performance of MALDI-TOF MS for the identification of anaerobic isolates during a 4-year period is described. Biomass from colonies grown on Brucella agar was directly smeared onto the MALDI-TOF target plate and submitted to on-plate protein extraction with 1μl of 100% formic acid. Sequencing analysis of the 16S rRNA gene was used as a reference method for the identification of isolates unreliably or not identified by MALDI-TOF MS. Overall, 95.7% of the isolates were identified to the species level using the updated V6 database vs 93.8% with previous databases lacking some anaerobic species; 68.5% of the total were reliably identified with high-confidence score values (≥2.0) and 95.0% with low-confidence values (score value ≥1.7). Besides, no differences between Gram-positive and Gram-negative isolates were detected beyond a slight decrease of correct species assignment for gram positive cocci (94.1% vs 95.7% globally). MALDI-TOF MS has demonstrated its usefulness for the identification of anaerobes, with high correlation with phenotypic and conventional methods. Over the study period, only 2.1% of the isolates could not be reliably identified and required molecular methods for a final identification. Therefore, MALDI-TOF MS provided reliable identification of anaerobic isolates, allowing clinicians to streamline the most appropriate antibiotic therapy and manage patients accordingly.
| S-EPMC8101409 | biostudies-literature
Project description:Posttraumatic infections can occur in orthopedic trauma patients, especially in open fractures. Rapid and accurate identification of pathogens in orthopedic trauma is important for clinical diagnosis and antimicrobial treatment. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) has been successfully used for first-line identification of pathogens grown on culture plates. However, for direct analysis of liquid clinical specimens, pre-purification of the sample is necessary. Herein, we investigated the feasibility of coupling Fc-MBL@Fe3O4 enrichment with MALDI-TOF MS profiling in the identification of pathogens in liquid-cultured samples. This method is successfully used for the identification of pathogens in a patient with an open-leg fracture obtained at sea. Pathogens were enriched by Fc-MBL@Fe3O4 from briefly pre-cultured liquid media and identified by MALDI-TOF MS. We identified an opportunistic pathogen, Vibrio alginolyticus, which is uncommon in clinical orthopedic trauma infection but exists widely in the sea. Therefore, combining Fc-MBL@Fe3O4 enrichment and MALDI-TOF MS profiling has great potential for direct identification of microbes in clinical samples.
| S-EPMC8120279 | biostudies-literature
Project description:Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) -based identification of bacteria and fungi significantly changed the diagnostic process in clinical microbiology. We describe here a novel technique for bacterial and yeast deposition on MALDI target using an automated workflow resulting in an increase of the microbes' score of MALDI identification. We also provide a comparison of four different sample preparation methods. In the first step of the study, 100 Gram-negative bacteria, 100 Gram-positive bacteria, 20 anaerobic bacteria and 20 yeasts were spotted on the MALDI target using manual deposition, semi-extraction, wet deposition onto 70% formic acid and by automatic deposition using MALDI Colonyst. The lowest scores were obtained by manual toothpick spotting which significantly differ from other methods. Identification score of semi-extraction, wet deposition and automatic wet deposition did not significantly differ using calculated relative standard deviation (RSD). Nevertheless, the best results with low error rate have been observed using MALDI Colonyst robot. The second step of validation included processing of 542 clinical isolates in routine microbiological laboratory by a toothpick direct spotting, on-plate formic acid extraction (for yeasts) and automatic deposition using MALDI Colonyst. Validation in routine laboratory process showed significantly higher identification scores obtained using automated process compared with standard manual deposition in all tested microbial groups (Gram-positive, Gram-negative, anaerobes, and yeasts). As shown by our data, automatic colony deposition on MALDI target results in an increase of MALDI-TOF MS identification scores and reproducibility.
| S-EPMC5747426 | biostudies-literature