Dataset Information

Characterization and classification of wines according to geographical origin, vintage and specific variety based on elemental content: a new chemometric approach.

ABSTRACT: A highly informative chemometric approach using elemental data to distinguish and classify wine samples according to different criteria was successfully developed. The robust chemometric methods, such fuzzy principal component analysis (FPCA), FPCA combined with linear discriminant analysis (LDA), namely FPCA-LDA and mainly fuzzy divisive hierarchical associative-clustering (FDHAC), including also classical methods (HCA, PCA and PCA-LDA) were efficaciously applied for characterization and classification of white wines according to the geographical origin, vintage or specific variety. The correct rate of classification applying LDA was 100% in all cases, but more compact groups have been obtained for FPCA scores. A similar separation of samples resulted also when the FDHAC was employed. In addition, FDHAC offers an excellent possibility to associate each fuzzy partition of wine samples to a fuzzy set of specific characteristics, finding in this way very specific elemental contents and fuzzy markers according to the degrees of membership (DOMs).

SUBMITTER: Feher I

PROVIDER: S-EPMC6838274 | biostudies-literature | 2019 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Characterization and classification of wines according to geographical origin, vintage and specific variety based on elemental content: a new chemometric approach.

Feher Ioana I Magdas Dana Alina DA Dehelean Adriana A Sârbu Costel C

Journal of food science and technology 20190805 12

A highly informative chemometric approach using elemental data to distinguish and classify wine samples according to different criteria was successfully developed. The robust chemometric methods, such fuzzy principal component analysis (FPCA), FPCA combined with linear discriminant analysis (LDA), namely FPCA-LDA and mainly fuzzy divisive hierarchical associative-clustering (FDHAC), including also classical methods (HCA, PCA and PCA-LDA) were efficaciously applied for characterization and classi ...[more]

PMID: 31749469

Similar Datasets

Project description:The authenticity of tea has become more important to the industry while the supply chains become complex. The quality and price of tea produced in different regions varies greatly. Currently, a rapid analytical method for testing the geographical origin of tea is missing. XRF is emerging as a screening technique for mineral and elemental analysis with applications in the traceability of foodstuffs, including tea. This study aims to develop a reliable multivariate classification model using XRF spectroscopy to obtain the mineral content. A total of 75 tea samples from tea producing countries throughout the world were analysed. After variable shortlisting, 18 elements were used to construct the multivariate models. Tea origin was determined by classifying the tea into 5 major geographical regions producing most of the global tea. PCA showed initial clustering in some regions, although the types of teas included in the study (black, green, white, herbal) showed no discrete cluster membership. The prediction power of each classification model developed was determined by using two multivariate classifiers, SIMCA and PLS-DA, against an independent validation set. The average overall correct classification rates of PLS-DA models were between 54-85% while the results of SIMCA models were between 70-84% resolving the poor clustering initially shown by PCA. This study demonstrated the potential of geographical origin of tea prediction using elemental contents of tea. Naturally, the classification can be linked not only to origin but to the type of tea as well.Practical applicationWholesalers and retailers need a rapid and robust screening tool to confirm the origin and type of tea they sell to consumers. X-Ray fluorescence spectroscopy proved a good technique for achieving this in commercial teas sourced worldwide. Building on multivariate models, broad classification was accomplished both in terms of origin (Asian vs non-Asian) and in tea type with zero sample preparation and low cost of analysis.

Project description:Wine is one of the most popular alcoholic beverages. Therefore, the control of the elemental composition is necessary throughout the entire production process from the grapes to the final product. The content of some elements in wine is very important from the organoleptic and nutritional points of view. Nowadays, wine studies have also been undertaken in order to perform wine categorization and/or to verify the authenticity of products. The main objective of this research was to evaluate the influence of the chosen factors (type of wine, producer, origin) on the levels of 28 elements in 180 wine samples. The concentration of studied elements was determined by ICP-MS (Ag, B, Ba, Be, Bi, Cd, Co, Cr, Cu, Li, Mn, Mo, Ni, Pb, Rb, Sb, Sn, Sr, Te, Tl, U, Zn), ICP-OES (Ca, Fe, K, Mg, Ti), and CVAAS (Hg) techniques in 79 red, 75 white, and 26 rose wine samples. In general, red wines contained higher values of mean and median of B, Ba, Cr, Cu, Mn, Sr and Zn in contrast to other wine types (white and rose). In white wines (when compared to red and rose wines) higher levels of elements such as Ag, Be, Bi, Cd, Co, Li, K and Ti were determined. In contrast, rose wines were characterized by a higher concentration of Fe and U. The study also revealed that in the case of 18 samples, the maximum levels of some metals (Cd-8 samples, Pb-9 samples, Cu-1 sample) were slightly exceeded according to the OIV standards, while for Zn and Ti in any wine sample the measured concentrations of these metals were above the permissible levels. Thus, it can be stated that the studied wines contained, in general, lower levels of heavy metals, suggesting that they should have no effect on the safety of consumption. The results also showed higher pH level for red wines as a consequence of the second fermentation process which is typically carried out for this type of wine (malolactic fermentation). The highest median value of pH was reported for Merlot-based wines, while the lowest was for Riesling. It is assumed that dry Riesling has a higher content of tartaric and malic acid than dry Chardonnay grown in the same climate. From all of the studied countries, wines from Poland seemed to present one of the most characteristic elemental fingerprints since for many elements relatively low levels were recorded. Moreover, this study revealed that also wine samples from USA and Australia can be potentially discriminated from the rest of studied wines. For USA the most characteristic metal for positive identification of the country of origin seems to be uranium, whereases for Australia - strontium and manganese. Based on the highly reduced set of samples, it was not possible to differentiate the studied wine products according to the grape variety other than Syrah, and partially Chardonnay. Since all the Syrah-based samples originated from the same country (Australia) thus, the observed grouping should be more related with the country of origin than the grape variety.

Dataset Information

Characterization and classification of wines according to geographical origin, vintage and specific variety based on elemental content: a new chemometric approach.

Publications

Characterization and classification of wines according to geographical origin, vintage and specific variety based on elemental content: a new chemometric approach.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets