Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Improvement of the thermoelectric properties of a MoO3 monolayer through oxygen vacancies.

ABSTRACT: We have investigated the thermoelectric properties of a pristine MoO3 monolayer and its defective structures with different oxygen vacancies using first-principles methods combined with Boltzmann transport theory. Our results show that the thermoelectric properties of the MoO3 monolayer exhibit an evident anisotropic behavior which is caused by the similar anisotropy of the electrical and thermal conductivity. The thermoelectric materials figure of merit (ZT) value along the x- and the y-axis is 0.72 and 0.08 at 300 K, respectively. Moreover, the creation of oxygen vacancies leads to a sharp peak near the Fermi level in the density of states. This proves to be an effective way to enhance the ZT values of the MoO3 monolayer. The increased ZT values can reach 0.84 (x-axis) and 0.12 (y-axis) at 300 K.

SUBMITTER: Zheng W

PROVIDER: S-EPMC6839554 | biostudies-literature | 2019

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Improvement of the thermoelectric properties of a MoO3 monolayer through oxygen vacancies.

Zheng Wenwen W Cao Wei W Wang Ziyu Z Deng Huixiong H Shi Jing J Xiong Rui R

Beilstein journal of nanotechnology 20191025

We have investigated the thermoelectric properties of a pristine MoO3 monolayer and its defective structures with different oxygen vacancies using first-principles methods combined with Boltzmann transport theory. Our results show that the thermoelectric properties of the MoO3 monolayer exhibit an evident anisotropic behavior which is caused by the similar anisotropy of the electrical and thermal conductivity. The thermoelectric materials figure of merit (ZT) value a ...[more]

PMID: 31728252

Similar Datasets

Tuning MoSO monolayer properties for optoelectronic and spintronic applications: effect of external strain, vacancies and doping.

Project description:Since the successful synthesis of the MoSSe monolayer, two-dimensional (2D) Janus materials have attracted huge attention from researchers. In this work, the MoSO monolayer with tunable electronic and magnetic properties is comprehensively investigated using first-principles calculations based on density functional theory (DFT). The pristine MoSO single layer is an indirect gap semiconductor with energy gap of 1.02(1.64) eV as predicted by the PBE(HSE06) functional. This gap feature can be efficiently modified by applying external strain presenting a decrease in its value upon switching the strain from compressive to tensile. In addition, the effects of vacancies and doping at Mo, S, and O sites on the electronic structure and magnetic properties are examined. Results reveal that Mo vacancies, and Al and Ga doping yield magnetic semiconductor 2D materials, where both spin states are semiconductors with significant spin-polarization at the vicinity of the Fermi level. In contrast, single S and O vacancies induce a considerable gap reduction of 52.89% and 58.78%, respectively. Doping the MoSO single layer with F and Cl at both S and O sites will form half-metallic 2D materials, whose band structures are generated by a metallic spin-up state and direct gap semiconductor spin-down state. Consequently, MoV, MoAl, MoGa, SF, SCl, OF, and OCl are magnetic systems, and the magnetism is produced mainly by the Mo transition metal that exhibits either ferromagnetic or antiferromagnetic coupling. Our work may suggest the MoSO Janus monolayer as a prospective candidate for optoelectronic applications, as well as proposing an efficient approach to functionalize it to be employed in optoelectronic and spintronic devices.

| S-EPMC9043256 | biostudies-literature

Pressure-induced enhancement in the thermoelectric properties of monolayer and bilayer SnSe2.

Project description:The electronic structures of monolayer and bilayer SnSe2 under pressure were investigated by using first-principles calculations including van der Waals interactions. For monolayer SnSe2, the variation of electronic structure under pressure is controlled by pressure-dependent lattice parameters. For bilayer SnSe2, the changes in electronic structure under pressure are dominated by intralayer and interlayer atomic interactions. The n-type thermoelectric properties of monolayer and bilayer SnSe2 under pressure were calculated on the basis of the semi-classical Boltzmann transport theory. It was found that the electrical conductivity of monolayer and bilayer SnSe2 can be enhanced under pressure, and such dependence can be attributed to the pressure-induced changes of the Se-Sn antibonding states in conduction band. Finally, the doping dependence of power factors of n-type monolayer and bilayer SnSe2 at three different pressures were estimated, and the results unveiled that thermoelectric performance of n-type monolayer and bilayer SnSe2 can be improved by applying external pressure. This study benefits to understand the nature of the transport properties for monolayer and bilayer SnSe2 under pressure, and it offers valuable insight for designing high-performance thermoelectric few-layered SnSe2 through strain engineering induced by external pressure.

| S-EPMC5882711 | biostudies-literature

Optimizing oxygen vacancies through grain boundary engineering to enhance electrocatalytic nitrogen reduction.

Project description:Electrocatalytic nitrogen reduction is a challenging process that requires achieving high ammonia yield rate and reasonable faradaic efficiency. To address this issue, this study developed a catalyst by in situ anchoring interfacial intergrown ultrafine MoO2 nanograins on N-doped carbon fibers. By optimizing the thermal treatment conditions, an abundant number of grain boundaries were generated between MoO2 nanograins, which led to an increased fraction of oxygen vacancies. This, in turn, improved the transfer of electrons, resulting in the creation of highly active reactive sites and efficient nitrogen trapping. The resulting optimal catalyst, MoO2/C700, outperformed commercial MoO2 and state-of-the-art N2 reduction catalysts, with NH3 yield and Faradic efficiency of 173.7 μg h-1 mg-1cat and 27.6%, respectively, under - 0.7 V vs. RHE in 1 M KOH electrolyte. In situ X-ray photoelectron spectroscopy characterization and density functional theory calculation validated the electronic structure effect and advantage of N2 adsorption over oxygen vacancy, revealing the dominant interplay of N2 and oxygen vacancy and generating electronic transfer between nitrogen and Mo(IV). The study also unveiled the origin of improved activity by correlating with the interfacial effect, demonstrating the big potential for practical N2 reduction applications as the obtained optimal catalyst exhibited appreciable catalytic stability during 60 h of continuous electrolysis. This work demonstrates the feasibility of enhancing electrocatalytic nitrogen reduction by engineering grain boundaries to promote oxygen vacancies, offering a promising avenue for efficient and sustainable ammonia production.

| S-EPMC10556631 | biostudies-literature

The electronic properties of SrTiO3-δ with oxygen vacancies or substitutions.

Project description:The electronic properties, including bandgap and conductivity, are critical for nearly all applications of multifunctional perovskite oxide ferroelectrics. Here we analysed possibility to induce semiconductor behaviour in these materials, which are basically insulators, by replacement of several percent of oxygen atoms with nitrogen, hydrogen, or vacancies. We explored this approach for one of the best studied members of the large family of ABO3 perovskite ferroelectrics - strontium titanate (SrTiO3). The atomic and electronic structure of defects were theoretically investigated using the large-scale first-principles calculations for both bulk crystal and thin films. The results of calculations were experimentally verified by studies of the optical properties at photon energies from 25 meV to 8.8 eV for in-situ prepared thin films. It was demonstrated that substitutions and vacancies prefer locations at surfaces or phase boundaries over those inside crystallites. At the same time, local states in the bandgap can be produced by vacancies located both inside the crystals and at the surface, but by nitrogen substitution only inside crystals. Wide-bandgap insulator phases were evidenced for all defects. Compared to pure SrTiO3 films, bandgap widening due to defects was theoretically predicted and experimentally detected.

| S-EPMC8639995 | biostudies-literature

Strain Effect on Thermoelectric Performance of InSe Monolayer.

Project description:Strain engineering is a practical method to tune and improve the physical characteristics and properties of two-dimensional materials, due to their large stretchability. Tensile strain dependence of electronic, phonon, and thermoelectric properties of InSe monolayer are systematically studied. We demonstrate that the lattice thermal conductivity can be effectively modulated by applying tensile strain. Tensile strain can enhance anharmonic phonon scattering, giving rise to the enhanced phonon scattering rate, reduced phonon group velocity and heat capacity, and therefore lattice thermal conductivity decreases from 25.9 to 13.1 W/mK when the strain of 6% is applied. The enhanced figure of merit indicates that tensile strain is an effective way to improve the thermoelectric performance of InSe monolayer.

| S-EPMC6702491 | biostudies-literature

Strain induced valley degeneracy: a route to the enhancement of thermoelectric properties of monolayer WS2.

Project description:Two-dimensional transition metal dichalcogenides show great potential as promising thermoelectric materials due to their lower dimensionality, the unique density of states and quantum confinement of carriers. Here the effects of mechanical strain on the thermoelectric performances of monolayer WS2 have been investigated using density functional theory associated with semiclassical Boltzmann transport theory. The variation of the Seebeck coefficient and band gap with applied strain has followed the same type of trend. For n-type material the relaxation time scaled power factor (S 2 σ/τ) increases by the application of compressive strain whereas for p-type material it increases with the application of tensile strain due to valley degeneracy. A 77% increase in the power factor has been observed for the n-type material by the application of uniaxial compressive strain. A decrease in lattice thermal conductivity with the increase in temperature causes an almost 40% increase in ZT product under applied uniaxial compressive strain. From the study, it is observed that uniaxial compressive strain is more effective among all types of strain to enhance the thermoelectric performance of monolayer WS2. Such strain induced enhancement of thermoelectric properties in monolayer WS2 could open a new window for the fabrication of high-quality thermoelectric devices.

| S-EPMC9070057 | biostudies-literature

Optical and Photocatalytic Properties of Br-Doped BiOCl Nanosheets with Rich Oxygen Vacancies and Dominating {001} Facets.

Project description:Crystal facet engineering and nonmetal doping are regarded as effective strategies for improving the separation of charge carriers and photocatalytic activity of semiconductor photocatalysts. In this paper, we developed a facial method for fabricating oxygen-deficient Br-doped BiOCl nanosheets with dominating {001} facets through a traditional hydrothermal reaction and explored the impact of the Br doping and specific facets on carrier separation and photocatalytic performance. The morphologies, structures, and optical and photocatalytic properties of the obtained products were characterized systematically. The BiOCl samples prepared by the hydrothermal reaction exhibited square-like shapes with dominating {001} facets. Photodeposition results indicated that photoinduced electrons preferred to transfer to {001} facets because of the strong internal static electric fields in BiOCl nanosheets with dominating {001} facets. Br doping not only contributed to the formation of impurity energy levels that could promote light absorption but introduced a large number of surface oxygen vacancies (VO) in BiOCl photocatalysts, which was beneficial for photocatalytic performance. Moreover, the photocatalytic activities of these products under visible light were tested by degradation of rhodamine B (RhB). Because of the synergistic effect of the dominating {001} facets, Br doping, and rich VO, oxygen-deficient Br-doped BiOCl nanosheets exhibited improved carrier separation, visible light absorption, and photocatalytic efficiency.

| S-EPMC9318533 | biostudies-literature

Regulating Te Vacancies through Dopant Balancing via Excess Ag Enables Rebounding Power Factor and High Thermoelectric Performance in p-Type PbTe.

Project description:Thermoelectric properties are frequently manipulated by introducing point defects into a matrix. However, these properties often change in unfavorable directions owing to the spontaneous formation of vacancies at high temperatures. Although it is crucial to maintain high thermoelectric performance over a broad temperature range, the suppression of vacancies is challenging since their formation is thermodynamically preferred. In this study, using PbTe as a model system, it is demonstrated that a high thermoelectric dimensionless figure of merit, zT ≈ 2.1 at 723 K, can be achieved by suppressing the vacancy formation via dopant balancing. Hole-killer Te vacancies are suppressed by Ag doping because of the increased electron chemical potential. As a result, the re-dissolution of Na2 Te above 623 K can significantly increase the hole concentration and suppress the drop in the power factor. Furthermore, point defect scattering in material systems significantly reduces lattice thermal conductivity. The synergy between defect and carrier engineering offers a pathway for achieving a high thermoelectric performance by alleviating the power factor drop and can be utilized to enhance thermoelectric properties of thermoelectric materials.

| S-EPMC8529492 | biostudies-literature

Carrier localization in perovskite nickelates from oxygen vacancies.

Project description:Point defects, such as oxygen vacancies, control the physical properties of complex oxides, relevant in active areas of research from superconductivity to resistive memory to catalysis. In most oxide semiconductors, electrons that are associated with oxygen vacancies occupy the conduction band, leading to an increase in the electrical conductivity. Here we demonstrate, in contrast, that in the correlated-electron perovskite rare-earth nickelates, RNiO3 (R is a rare-earth element such as Sm or Nd), electrons associated with oxygen vacancies strongly localize, leading to a dramatic decrease in the electrical conductivity by several orders of magnitude. This unusual behavior is found to stem from the combination of crystal field splitting and filling-controlled Mott-Hubbard electron-electron correlations in the Ni 3d orbitals. Furthermore, we show the distribution of oxygen vacancies in NdNiO3 can be controlled via an electric field, leading to analog resistance switching behavior. This study demonstrates the potential of nickelates as testbeds to better understand emergent physics in oxide heterostructures as well as candidate systems in the emerging fields of artificial intelligence.

| S-EPMC6825322 | biostudies-literature

Femtosecond visualization of oxygen vacancies in metal oxides.

Project description:Oxygen vacancies often determine the electronic structure of metal oxides, but existing techniques cannot distinguish the oxygen-vacancy sites in the crystal structure. We report here that time-resolved optical spectroscopy can solve this challenge and determine the spatial locations of oxygen vacancies. Using tungsten oxides as examples, we identified the true oxygen-vacancy sites in WO2.9 and WO2.72, typical derivatives of WO3 and determined their fingerprint optoelectronic features. We find that a metastable band with a three-stage evolution dynamics of the excited states is present in WO2.9 but is absent in WO2.72. By comparison with model bandstructure calculations, this enables determination of the most closely neighbored oxygen-vacancy pairs in the crystal structure of WO2.72, for which two oxygen vacancies are ortho-positioned to a single W atom as a sole configuration among all O?W bonds. These findings verify the existence of preference rules of oxygen vacancies in metal oxides.

| S-EPMC7060066 | biostudies-literature