Dataset Information

The "coracoid tunnel view": a simulation study for finding the optimal screw trajectory in coracoid base fracture fixation.

ABSTRACT: PURPOSE:Coracoid fractures represent approximately 3-13% of all scapular fractures. Open reduction and internal fixation can be indicated for a coracoid base fracture. This procedure is challenging due to the nature of visualization of the coracoid with fluoroscopy. The aim of this study was to develop a fluoroscopic imaging protocol, which helps surgeons in finding the optimal insertion point and screw orientation for fixations of coracoid base fractures, and to assess its feasibility in a simulation study. METHODS:A novel imaging protocol was defined for screw fixation of coracoid base fractures under fluoroscopic guidance. The method is based on finding the optimal view for screw insertion perpendicular to the viewing plane. In a fluoroscopy simulation environment, eight orthopaedic surgeons were invited to place a screw down the coracoid stalk through the coracoid base and into the neck of 14 cadaveric scapulae using anatomical landmarks. The surgeons placed screws before and after they received an e-learning of the optimal view. Results of the two sessions were compared and inter-rater reliability was calculated. RESULTS:Screw placement was correct in 33 out of 56 (58.9%) before, and increased to 50 out of 56 (89.3%) after the coracoid tunnel view was explained to the surgeons, which was a significant improvement (p?

SUBMITTER: van Trikt CH

PROVIDER: S-EPMC6841653 | biostudies-literature | 2019 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

The "coracoid tunnel view": a simulation study for finding the optimal screw trajectory in coracoid base fracture fixation.

van Trikt C H CH Dobbe J G G JGG Donders J C E JCE Streekstra G J GJ Kloen P P

Surgical and radiologic anatomy : SRA 20190704 11

<h4>Purpose</h4>Coracoid fractures represent approximately 3-13% of all scapular fractures. Open reduction and internal fixation can be indicated for a coracoid base fracture. This procedure is challenging due to the nature of visualization of the coracoid with fluoroscopy. The aim of this study was to develop a fluoroscopic imaging protocol, which helps surgeons in finding the optimal insertion point and screw orientation for fixations of coracoid base fractures, and to assess its feasibility i ...[more]

PMID: 31273419

Similar Datasets

Project description:INTRODUCTION:In locked plate fixation of proximal humerus fractures, the calcar is an important anchor point for screws providing much-needed medial column support. Most locking plate implants utilize a fixed-trajectory locking screw to achieve this goal. Consequently, adjustments of plate location to account for patient-specific anatomy may result in a screw position outside of the calcar. To date, little is known about the consequences of "missing" the calcar during plate positioning. This study sought to characterize the biomechanics associated with proximal and distal placement of locking plates in a two-part fracture model. MATERIALS AND METHODS:This experiment was performed twice, first with elderly cadaveric specimens and again with osteoporotic sawbones. Two-part fractures were simulated and specimens were divided to represent proximal, neutral, and distal plate placements. Non-destructive torsional and axial compression tests were performed prior to an axial fatigue test and a ramp to failure. Torsional stiffness, axial stiffness, humeral head displacement and stiffness during fatigue testing, and ultimate load were compared between groups. RESULTS:Cadavers: Proximal implant placement led to trends of decreased mechanical properties, but there were no significant differences found between groups. Sawbones: Distal placement increased torsional stiffness in both directions (p?=?0.003, p?=?0.034) and axial stiffness (p?=?0.018) when compared to proximal placement. Distal placement also increased torsional stiffness in external rotation (p?=?0.020), increased axial stiffness (p?=?0.024), decreased humeral head displacement during fatigue testing, and increased stiffness during fatigue testing when compared to neutral placement. DISCUSSION:The distal and neutral groups had similar mechanical properties in many cadaveric comparisons while the proximal group trended towards decreased construct stiffness. RESULTS:from the Sawbones model were more definitive and provided further evidence that proximal calcar screw placements are undesirable and distal implant placement may provide improved construct stability. CONCLUSION:Successful proximal humerus fracture reconstruction is inherent upon anatomic fracture reduction coupled with medial column support. Results from this experiment suggest that missing the calcar proximally is deleterious to fixation strength, while it is safe, and perhaps even desirable, to aim slightly distal to the intended target.

Dataset Information

The "coracoid tunnel view": a simulation study for finding the optimal screw trajectory in coracoid base fracture fixation.

Publications

The "coracoid tunnel view": a simulation study for finding the optimal screw trajectory in coracoid base fracture fixation.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets