Non-noble metal-nitride based electrocatalysts for high-performance alkaline seawater electrolysis.
Ontology highlight
ABSTRACT:
SUBMITTER: Yu L
PROVIDER: S-EPMC6841982 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Water electrolysis is an advanced energy conversion technology to produce hydrogen as a clean and sustainable chemical fuel, which potentially stores the abundant but intermittent renewable energy sources scalably. Since the overall water splitting is an uphill reaction in low efficiency, innovative breakthroughs are desirable to greatly improve the efficiency by rationally designing non-precious metal-based robust bifunctional catalysts for promoting both the cathodic hydrogen evolution and anodic oxygen evolution reactions. We report a hybrid catalyst constructed by iron and dinickel phosphides on nickel foams that drives both the hydrogen and oxygen evolution reactions well in base, and thus substantially expedites overall water splitting at 10?mA?cm-2 with 1.42?V, which outperforms the integrated iridium (IV) oxide and platinum couple (1.57?V), and are among the best activities currently. Especially, it delivers 500?mA?cm-2 at 1.72?V without decay even after the durability test for 40 h, providing great potential for large-scale applications.
| S-EPMC6026163 | biostudies-literature
Project description:CONSPECTUS: Metallic and catalytically active materials with high surface area and large porosity are a long-desired goal in both industry and academia. In this Account, we summarize the strategies for making a variety of self-supported noble metal aerogels consisting of extended metal backbone nanonetworks. We discuss their outstanding physical and chemical properties, including their three-dimensional network structure, the simple control over their composition, their large specific surface area, and their hierarchical porosity. Additionally, we show some initial results on their excellent performance as electrocatalysts combining both high catalytic activity and high durability for fuel cell reactions such as ethanol oxidation and the oxygen reduction reaction (ORR). Finally, we give some hints on the future challenges in the research area of metal aerogels. We believe that metal aerogels are a new, promising class of electrocatalysts for polymer electrolyte fuel cells (PEFCs) and will also open great opportunities for other electrochemical energy systems, catalysis, and sensors. The commercialization of PEFCs encounters three critical obstacles, viz., high cost, insufficient activity, and inadequate long-term durability. Besides others, the sluggish kinetics of the ORR and alcohol oxidation and insufficient catalyst stability are important reasons for these obstacles. Various approaches have been taken to overcome these obstacles, e.g., by controlling the catalyst particle size in an optimized range, forming multimetallic catalysts, controlling the surface compositions, shaping the catalysts into nanocrystals, and designing supportless catalysts with extended surfaces such as nanostructured thin films, nanotubes, and porous nanostructures. These efforts have produced plenty of excellent electrocatalysts, but the development of multisynergetic functional catalysts exhibiting low cost, high activity, and high durability still faces great challenges. In this Account, we demonstrate that the sol-gel process represents a powerful "bottom-up" strategy for creating nanostructured materials that tackles the problems mentioned above. Aerogels are unique solid materials with ultralow densities, large open pores, and ultimately high inner surface areas. They magnify the specific properties of nanomaterials to the macroscale via self-assembly, which endow them with superior properties. Despite numerous investigations of metal oxide aerogels, the investigation of metal aerogels is in the early stage. Recently, aerogels including Fe, Co, Ni, Sn, and Cu have been obtained by nanosmelting of hybrid polymer-metal oxide aerogels. We report here exclusively on mono-, bi- and multimetallic noble metal aerogels consisting of Ag, Au, Pt, and Pd and their application as electrocatalysts.
| S-EPMC4578670 | biostudies-literature
Project description:Developing earth-abundant, active and stable electrocatalysts which operate in the same electrolyte for water splitting, including oxygen evolution reaction and hydrogen evolution reaction, is important for many renewable energy conversion processes. Here we demonstrate the improvement of catalytic activity when transition metal oxide (iron, cobalt, nickel oxides and their mixed oxides) nanoparticles (∼20 nm) are electrochemically transformed into ultra-small diameter (2-5 nm) nanoparticles through lithium-induced conversion reactions. Different from most traditional chemical syntheses, this method maintains excellent electrical interconnection among nanoparticles and results in large surface areas and many catalytically active sites. We demonstrate that lithium-induced ultra-small NiFeOx nanoparticles are active bifunctional catalysts exhibiting high activity and stability for overall water splitting in base. We achieve 10 mA cm(-2) water-splitting current at only 1.51 V for over 200 h without degradation in a two-electrode configuration and 1 M KOH, better than the combination of iridium and platinum as benchmark catalysts.
| S-EPMC4557299 | biostudies-literature
Project description:The synthesis of electrocatalyst and the electrode preparation were merged into a one-step process and proved to be a versatile method to synthesize metal oxide electrocatalysts on the conductive carbon paper (CP). Very simply, the metal precursor deposited on the CP was thermally treated by a torch-gun for just 6 s, resulting in the formation of RuO2 , Co3 O4 , and mixed oxide nanoparticles. The material could be directly used as working electrode for oxygen evolution reaction (OER). Compared with commercial and other state-of-the-art electrocatalysts, the fabricated electrode showed a superior electrocatalytic activity for OER in 1 m HClO4 and 1 m KOH in terms of not only a low overpotential to reach 10 mA cm-2 but also a high current density at 1.6 VRHE with satisfying a long-term stability. The novel strategy without requiring time-consuming and uneconomical steps could be expanded to the preparation of various metal oxides on conductive substrates towards diverse electrocatalytic applications.
| S-EPMC9299631 | biostudies-literature
Project description:Hydrogen production via water splitting has been extensively explored over the past few decades, and considerable effort has been directed toward finding more reactive and cost-effective electrocatalysts by engineering their compositions, shapes, and crystal structures. In this study, we developed hierarchical cobalt phosphide (Co-P) nanosphere assemblies as non-noble metal electrocatalysts via one-step electrodeposition. The morphologies of the Co-P nanostructures and their electrocatalytic activities towards the hydrogen evolution reactions (HER) were controlled by the applied potentials during electrodeposition. The physicochemical properties of the as-prepared Co-P nanostructures in this study were characterized by field-emission scanning electron microscopy, X-ray photoemission spectroscopy and X-ray diffraction. Linear sweep voltammetry revealed that the Co-P grown at -0.9 V showed the best HER performance exhibiting the highest electrochemical active surface area and lowest interfacial charge transfer resistance. The Co-P electrocatalysts showed superior long-term stability to electrodeposited Pt, indicating their potential benefits.
| S-EPMC9867289 | biostudies-literature
Project description:In recent decades, fuel cell technology has been undergoing revolutionary developments, with fundamental progress being the replacement of electrolyte solutions with polymer electrolytes, making the device more compact in size and higher in power density. Nowadays, acidic polymer electrolytes, typically Nafion, are widely used. Despite great success, fuel cells based on acidic polyelectrolyte still depend heavily on noble metal catalysts, predominantly platinum (Pt), thus increasing the cost and hampering the widespread application of fuel cells. Here, we report a type of polymer electrolyte fuel cells (PEFC) employing a hydroxide ion-conductive polymer, quaternary ammonium polysulphone, as alkaline electrolyte and nonprecious metals, chromium-decorated nickel and silver, as the catalyst for the negative and positive electrodes, respectively. In addition to the development of a high-performance alkaline polymer electrolyte particularly suitable for fuel cells, key progress has been achieved in catalyst tailoring: The surface electronic structure of nickel has been tuned to suppress selectively the surface oxidative passivation with retained activity toward hydrogen oxidation. This report of a H2–O2 PEFC completely free from noble metal catalysts in both the positive and negative electrodes represents an important advancement in the research and development of fuel cells.
| S-EPMC2634878 | biostudies-literature
Project description:Overall seawater electrolysis is an important direction for the development of hydrogen energy conversion. The key issues include how to achieve high selectivity, activity, and stability in seawater electrolysis reactions. In this report, the heterostructures of graphdiyne-RhOx-graphdiyne (GDY/RhOx/GDY) were constructed by in situ-controlled growth of GDY on RhOx nanocrystals. A double layer interface of sp-hybridized carbon-oxide-Rhodium (sp-C∼O-Rh) was formed in this system. The microstructures at the interface are composed of active sites of sp-C∼O-Rh. The obvious electron-withdrawing surface enhances the catalytic activity with orders of magnitude, while the GDY outer of the metal oxides guarantees the stability. The electron-donating and withdrawing sp-C∼O-Rh structures enhance the catalytic activity, achieving high-performance overall seawater electrolysis with very small cell voltages of 1.42 and 1.52 V at large current densities of 10 and 500 mA cm-2 at room temperatures and ambient pressures, respectively. The compositional and structural superiority of the GDY-derived sp-C-metal-oxide active center offers great opportunities to engineer tunable redox properties and catalytic performance for seawater electrolysis and beyond. This is a typical successful example of the rational design of catalytic systems.
| S-EPMC9457402 | biostudies-literature
Project description:Bifunctional oxygen electrocatalysts are essential in the development of low-temperature unitized regenerative fuel cells (URFCs), as a promising alternative for storing energy via hydrogen. TiO2, as a semiconductor material, is commonly not established as an active electrocatalyst for oxygen reduction and oxygen evolution due to its poor electrical conductivity and low reactivity. Here, we demonstrated that composites composed of TiO2 and N-doped graphene can be active in oxygen reduction and evolution reactions in an alkaline environment. Combination factors such anatase/rutile interaction, N-doping graphene, and the presence of Ti3+/Ti-N species raise the active sites and improve the electrochemical activity. Our results may afford an opportunity to develop a non-noble and promising electrocatalyst in energy storage technology.
| S-EPMC9134212 | biostudies-literature
Project description:Applications for metal-organic frameworks (MOFs) demand their assembly into three-dimensional (3D) macroscopic architectures. The capability of sustaining structural integrity with considerable deformation is important to allow a monolithic material to work reliably. Nevertheless, it remains a significant challenge to introduce superplasticity in 3D MOF networks. Here, we report a general procedure for synthesizing 3D superplastic MOF aerogels inspired by the hierarchical architecture of natural corks. The resultant MOFs exhibited excellent superplasticity that can recover fully and rapidly to its original dimension after 50% strain compression and unloading for >2000 cycles. The 3D superplastic architecture is achieved by successively assembling one-dimensional (1D) to two-dimensional (2D) and then 3D, in a variety of MOFs with different transition metal active sites (Co-, NiMn-, NiCo-, NiCoMn-) and organic ligands (2-thiophenecarboxylic acid and glutaric acid). Latent applications have been demonstrated for NiMn-MOF aerogels to serve as a new generation of flexible electrocatalysts for hydrogen evolution reaction (HER) from seawater splitting, which requires a low overpotential of 243 mV to achieve a current density of 10 mA·cm-2. Notably, the electrocatalyst remains stable even being deformed, as the overpotential to achieve a current density of 10 mA·cm-2 increases slightly to 270, 264, and 258 mV after one-, two-, and threefold, respectively. In great contrast, traditional MOF powder-electrodes demonstrate significant activity decay under similar conditions. This work opens up enormous opportunities for exploring new applications of MOFs in a freestanding, structurally adaptive, and macroscopic form.
| S-EPMC10190981 | biostudies-literature
Project description:Enhancing the water flux while maintaining the high salt rejection of existing reverse osmosis membranes remains a considerable challenge. Herein, we report the use of a porous carbon nitride (C3N4) nanoparticle to potentially improve both the water flux and salt rejection of the state-of-the-art polyamide (PA) thin film composite (TFC) membranes. The organic-organic covalent bonds endowed C3N4 with great compatibility with the PA layer, which positively influenced the customization of interfacial polymerization (IP). Benefitting from the positive effects of C3N4, a more hydrophilic, more crumpled thin film nanocomposite (TFN) membrane with a larger surface area, and an increased cross-linking degree of PA layer was achieved. Moreover, the uniform porous structure of the C3N4 embedded in the "ridge" sections of the PA layer potentially provided additional water channels. All these factors combined provided unprecedented performance for seawater desalination among all the PA-TFC membranes reported thus far. The water permeance of the optimized TFN membrane is 2.1-folds higher than that of the pristine PA-TFC membrane, while the NaCl rejection increased to 99.5% from 98.0%. Our method provided a promising way to improve the performance of the state-of-art PA-TFC membranes in seawater desalination.
| S-EPMC7466004 | biostudies-literature