Human bony labyrinth dataset: Co-registered CT and micro-CT images, surface models and anatomical landmarks.
Ontology highlight
ABSTRACT:
SUBMITTER: Wimmer W
PROVIDER: S-EPMC6864122 | biostudies-literature | 2019 Dec
REPOSITORIES: biostudies-literature
Publications
Human bony labyrinth dataset: Co-registered CT and micro-CT images, surface models and anatomical landmarks.
Wimmer Wilhelm W Anschuetz Lukas L Weder Stefan S Wagner Franca F Delingette Hervé H Caversaccio Marco M
Data in brief 20191109
The presented data set consists of images, labels and surface models of 23 human bony labyrinths. For each specimen clinical computed tomography (CT) and co-registered high-resolution micro-CT images were acquired. Using the images, the bony labyrinth was segmented and 3D surface models were generated. Each specimen is accompanied by a description file containing the coordinates of anatomical landmarks and the corresponding cochlear coordinate system. The data set can be used to study the morpho ...[more]
Similar Datasets
Project description:Because various biomechanical studies and clinical results have shown the effectiveness of an anatomical approach for anterior cruciate ligament (ACL) reconstruction, this approach has become gradually commonplace to improve postoperative performance. Standard tunnel positioning methods with accuracy, reproducibility, and adaptability to varied concepts are essential for the success of anatomical ACL reconstruction. However, there were no standard tibial tunnel positioning methods to satisfy these conditions. This technical note reports our tibial tunnel positioning technique using bony and/or anatomical landmarks for anatomical ACL reconstruction.
| S-EPMC5368106 | biostudies-literature
Project description:Previous work [Burgess et al., Med. Phys. 28, 419-437 (2001)] has shown that anatomical noise in projection mammography results in a power spectrum well modeled over a range of frequencies by a power law, and the exponent (beta) of this power law plays a critical role in determining the size at which a growing lesion reaches the threshold for detection. In this study, the authors evaluated the power-law model for breast computed tomography (bCT) images, which can be thought of as thin sections through a three-dimensional (3D) volume. Under the assumption of a 3D power law describing the distribution of attenuation coefficients in the breast parenchyma, the authors derived the relationship between the power-law exponents of bCT and projection images and found it to be betasection=betaproj-1. They evaluated this relationship on clinical images by comparing bCT images from a set of 43 patients to Burgess' findings in mammography. They were able to make a direct comparison for 6 of these patients who had both a bCT exam and a digitized film-screen mammogram. They also evaluated segmented bCT images to investigate the extent to which the bCT power-law exponent can be explained by a binary model of attenuation coefficients based on the different attenuation of glandular and adipose tissue. The power-law model was found to be a good fit for bCT data over frequencies from 0.07 to 0.45 cyc/mm, where anatomical variability dominates the spectrum. The average exponent for bCT images was 1.86. This value is close to the theoretical prediction using Burgess' published data for projection mammography and for the limited set of mammography data available from the authors' patient sample. Exponents from the segmented bCT images (average value: 2.06) were systematically slightly higher than bCT images, with substantial correlation between the two (r=0.84).
| S-EPMC3304474 | biostudies-other
Project description:Analytical electron microscopy plays a key role in the development of novel nanomaterials. Electron energy-loss spectroscopy (EELS) and energy-dispersive X-ray spectroscopy (EDX) datasets are typically processed to isolate the background-subtracted elemental signal. Multivariate tools have emerged as powerful methods to blindly map the components, which addresses some of the shortcomings of the traditional methods. Here, we demonstrate the superior performance of a new multivariate optimization method using a challenging EELS and EDX dataset. The dataset was recorded from a spectrum image P-type metal-oxide-semiconductor stack with 7 components exhibiting heavy spectral overlap and a low signal-to-noise ratio. Compared to peak integration, independent component analysis, Baysian Linear Unmixing and Non-negative matrix factorization, the method proposed was the only one to identify the EELS spectra of all 7 components with the corresponding abundance profiles. Using the abundance of each component, it was possible to retrieve the EDX spectra of all the components, which were otherwise impossible to isolate, regardless of the method used. We expect that this robust method will bring a significant improvement for the chemical analysis of nanomaterials, especially for weak signals, dose-sensitive specimen or signals suffering heavy spectral overlap.
| S-EPMC6906416 | biostudies-literature
Project description:the position of the mandibular lingula (Li) affects the success rate of the inferior alveolar nerve block (IANB) and ramus osteotomies. This study evaluated the position of the Li, to investigate the anatomical relationship between the Li and some anatomical measurements using cone beam computed tomography (CBCT). 201 hemimandibular CBCTs of 111 patients (43 males and 68 females; 18 to 88 years old) were retrospectively evaluated. The Li location was determined from the lingula tip to: the occlusal plane, the anterior and posterior borders of the mandibular ramus, the lower border of the mandible, the distal surface of the mandibular second molar, and the mandibular notch. We evaluated the correlations between the Li and the anteroposterior diameter of the mandibular ramus; the vertical distance between condyle and mandibular angle; the mesial-distal diameter of the first, second, and third mandibular molar, the intercanine distance, the intermolar distances among the first, second, and third mandibular molars; the distance between the intermolar line of the first molar and midline, and the length of the mandibular body. the vertical distance of the Li from the occlusal plane was 11.22 ± 4.27 mm. Some parameters significantly correlated with the anatomical measurements taken into consideration. the present study provides new information concerning the Li and mandibular anatomy in the Italian population. Moreover, by correlating some anatomic measurements to the Li position, the localization of the Li is made possible, indirectly through the measurement of some distances between anatomical landmarks.
| S-EPMC8701814 | biostudies-literature
Project description:Intra-articular glenohumeral injection is an important technique used to diagnose and treat shoulder disorders. However, it is frequently performed as an image-guided technique with the use of fluoroscopy, ultrasound, computed tomography, or magnetic resonance. The purpose of this Technical Note is to describe a transcoracoacromial ligament glenohumeral injection technique that uses anatomic surface landmarks to avoid the need for radiographic guidance. After identification of the anterolateral corner of acromion, the superior lateral border of the coracoid tip, and the curved depression of the distal clavicle, the needle entry site is determined at the trisection point between the distal and middle thirds of the line formed by the superior lateral border of the coracoid tip and the curved depression of the distal clavicle. The needle is first inserted perpendicular to the triangular plane of the 3 points and is then advanced toward the humeral head. This injection technique is highly accurate and reproducible and can be done in the outpatient clinic without the use of imaging guidance, reducing the costs and barriers of intra-articular glenohumeral injections for patients.
| S-EPMC6410342 | biostudies-literature
Project description:Carnivorans are a highly diverse and successful group of mammals, found on the top of the food chain. They originated in the Palaeocene (ca. 60?Ma) and have developed numerous lifestyles, locomotion modes and hunting strategies during their evolutionary history. Mechanosensory organs, such as the inner ear (which houses senses of equilibrium and hearing), represent informative anatomical systems to obtain insights into function, ecology and phylogeny of extant and extinct vertebrates. Using µCT scans, we examined bony labyrinths of a broad sample of various carnivoran species, to obtain new information about hunting behaviours of ancient carnivorans. Bony labyrinths were digitally reconstructed and measurements were taken directly from these 3D models. Principal component analyses generally separated various hunting strategies (pursuit, pounce, ambush and occasional), but also support their phylogenetic relationships (Canoidea vs. Feloidea). The height, width and length of all three semicircular canals show functional morphological adaptations, whereas the diameter of the canals, the height of the cochlea and particularly the angle between the lateral semicircular canal and the cochlea indicate a phylogenetic signal. The results demonstrate that the bony labyrinth provides a powerful ecological proxy reflecting both predatory habits as well as phylogenetic relationships in extinct and extant carnivorans.
| S-EPMC6329752 | biostudies-literature
Project description:Deer are an iconic group of large mammals that originated in the Early Miocene of Eurasia (ca. 19?Ma). While there is some consensus on key relationships among their members, on the basis of molecular- or morphology-based analyses, or combined approaches, many questions remain, and the bony labyrinth has shown considerable potential for the phylogenetics of this and other groups. Here we examine its shape in 29 species of living and fossil deer using 3D geometric morphometrics and cladistics. We clarify several issues of the origin and evolution of cervids. Our results give new age estimates at different nodes of the tree and provide for the first time a clear distinction of stem and crown Cervidae. We unambiguously attribute the fossil Euprox furcatus (13.8?Ma) to crown Cervidae, pushing back the origin of crown deer to (at least) 4?Ma. Furthermore, we show that Capreolinae are more variable in bony labyrinth shape than Cervinae and confirm for the first time the monophyly of the Old World Capreolinae (including the Chinese water deer Hydropotes) based on morphological characters only. Finally, we provide evidence to support the sister group relationship of Megaloceros giganteus with the fallow deer Dama.
| S-EPMC5640792 | biostudies-literature
Project description:Population affinity identification is important for reconstructing the biological profile of human skeletal remains. Most anthropological methods for predicting population affinity rely on complete crania or cranial parts. However, complete parts are frequently not found in forensic and bioarchaeological contexts. In contrast, the petrous portion of the cranium presents a unique rate of preservation in the field. Therefore, this study aimed to develop stepwise discriminant function formulae to determine population affinity using measurements on three-dimensional models of the human adult bony labyrinth. The sample utilised consisted of 30 German, 38 African Zulu, and 30 Oneota individuals. A total of four function equations were developed. The function involving all three populations presented an average accuracy of 90.8%. Mathematical equations were also derived to discriminate between Zulu and Germans (91.2%), Zulu and Oneota (95.5%), as well as Oneota and Germans (96.7%). These results indicate this new method of population affinity identification is highly successful, even with fragmentary remains.
| S-EPMC9312872 | biostudies-literature
Project description:BackgroundVariation is a naturally occurring phenomenon that is observable at all levels of morphology, from anatomical variations of DNA molecules to gross variations between whole organisms. The structure of the otic region is no exception. The present paper documents the broad morphological diversity exhibited by the inner ear region of placental mammals using digital endocasts constructed from high-resolution X-ray computed tomography (CT). Descriptions cover the major placental clades, and linear, angular, and volumetric dimensions are reported.Principal findingsThe size of the labyrinth is correlated to the overall body mass of individuals, such that large bodied mammals have absolutely larger labyrinths. The ratio between the average arc radius of curvature of the three semicircular canals and body mass of aquatic species is substantially lower than the ratios of related terrestrial taxa, and the volume percentage of the vestibular apparatus of aquatic mammals tends to be less than that calculated for terrestrial species. Aspects of the bony labyrinth are phylogenetically informative, including vestibular reduction in Cetacea, a tall cochlear spiral in caviomorph rodents, a low position of the plane of the lateral semicircular canal compared to the posterior canal in Cetacea and Carnivora, and a low cochlear aspect ratio in Primatomorpha.SignificanceThe morphological descriptions that are presented add a broad baseline of anatomy of the inner ear across many placental mammal clades, for many of which the structure of the bony labyrinth is largely unknown. The data included here complement the growing body of literature on the physiological and phylogenetic significance of bony labyrinth structures in mammals, and they serve as a source of data for future studies on the evolution and function of the vertebrate ear.
| S-EPMC3689836 | biostudies-literature
Project description:Statistical shape analysis is a very useful tool in a wide range of medical and biological applications. However, it typically relies on the ability to produce a relatively small number of features that can capture the relevant variability in a population. State-of-the-art methods for obtaining such anatomical features rely on either extensive preprocessing or segmentation and/or significant tuning and post-processing. These shortcomings limit the widespread use of shape statistics. We propose that effective shape representations should provide sufficient information to align/register images. Using this assumption we propose a self-supervised, neural network approach for automatically positioning and detecting landmarks in images that can be used for subsequent analysis. The network discovers the landmarks corresponding to anatomical shape features that promote good image registration in the context of a particular class of transformations. In addition, we also propose a regularization for the proposed network which allows for a uniform distribution of these discovered landmarks. In this paper, we present a complete framework, which only takes a set of input images and produces landmarks that are immediately usable for statistical shape analysis. We evaluate the performance on a phantom dataset as well as 2D and 3D images.
| S-EPMC7993653 | biostudies-literature