Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

ANN-Based Fatigue Strength of Concrete under Compression.

ABSTRACT: When concrete is subjected to cycles of compression, its strength is lower than the statically determined concrete compressive strength. This reduction is typically expressed as a function of the number of cycles. In this work, we study the reduced capacity as a function of a given number of cycles by means of artificial neural networks. We used an input database with 203 datapoints gathered from the literature. To find the optimal neural network, 14 features of neural networks were studied and varied, resulting in the optimal neural net. This proposed model resulted in a maximum relative error of 5.1% and a mean relative error of 1.2% for the 203 datapoints. The proposed model resulted in a better prediction (mean tested to predicted value = 1.00 with a coefficient of variation 1.7%) as compared to the existing code expressions. The model we developed can thus be used for the design and the assessment of concrete structures and provides a more accurate assessment and design than the existing methods.

SUBMITTER: Abambres M

PROVIDER: S-EPMC6888038 | biostudies-literature | 2019 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

ANN-Based Fatigue Strength of Concrete under Compression.

Abambres Miguel M Lantsoght Eva O L EOL

Materials (Basel, Switzerland) 20191118 22

When concrete is subjected to cycles of compression, its strength is lower than the statically determined concrete compressive strength. This reduction is typically expressed as a function of the number of cycles. In this work, we study the reduced capacity as a function of a given number of cycles by means of artificial neural networks. We used an input database with 203 datapoints gathered from the literature. To find the optimal neural network, 14 features of neural networks were studied and ...[more]

PMID: 31752193

Similar Datasets

Investigation of ANN architecture for predicting the compressive strength of concrete containing GGBFS.

Project description:An extensive simulation program is used in this study to discover the best ANN model for predicting the compressive strength of concrete containing Ground Granulated Blast Furnace Slag (GGBFS). To accomplish this purpose, an experimental database of 595 samples is compiled from the literature and utilized to find the best ANN architecture. The cement content, water content, coarse aggregate content, fine aggregate content, GGBFS content, carboxylic type hyper plasticizing content, superplasticizer content, and testing age are the eight inputs in this database. As a result, the optimal selection of the ANN design is carried out and evaluated using conventional statistical metrics. The results demonstrate that utilizing the best architecture [8-14-4-1] among the 240 investigated architectures, and the best ANN model, is a very efficient predictor of the compressive strength of concrete using GGBFS, with a maximum R2 value of 0.968 on the training part and 0.965 on the testing part. Furthermore, a sensitivity analysis is performed over 500 Monte Carlo simulations using the best ANN model to determine the reliability of ANN model in predicting the compressive strength of concrete. The findings of this research may make it easier and more efficient to apply the ANN model to many civil engineering challenges.

| S-EPMC8641896 | biostudies-literature

Investigation of ANN architecture for predicting shear strength of fiber reinforcement bars concrete beams.

Project description:In this paper, an extensive simulation program is conducted to find out the optimal ANN model to predict the shear strength of fiber-reinforced polymer (FRP) concrete beams containing both flexural and shear reinforcements. For acquiring this purpose, an experimental database containing 125 samples is collected from the literature and used to find the best architecture of ANN. In this database, the input variables consist of 9 inputs, such as the ratio of the beam width, the effective depth, the shear span to the effective depth, the compressive strength of concrete, the longitudinal FRP reinforcement ratio, the modulus of elasticity of longitudinal FRP reinforcement, the FRP shear reinforcement ratio, the tensile strength of FRP shear reinforcement, the modulus of elasticity of FRP shear reinforcement. Thereafter, the selection of the appropriate architecture of ANN model is performed and evaluated by common statistical measurements. The results show that the optimal ANN model is a highly efficient predictor of the shear strength of FRP concrete beams with a maximum R2 value of 0.9634 on the training part and an R2 of 0.9577 on the testing part, using the best architecture. In addition, a sensitivity analysis using the optimal ANN model over 500 Monte Carlo simulations is performed to interpret the influence of reinforcement type on the stability and accuracy of ANN model in predicting shear strength. The results of this investigation could facilitate and enhance the use of ANN model in different real-world problems in the field of civil engineering.

| S-EPMC8018664 | biostudies-literature

Investigation and Optimization of the C-ANN Structure in Predicting the Compressive Strength of Foamed Concrete.

Project description:Development of Foamed Concrete (FC) and incessant increases in fabrication technology have paved the way for many promising civil engineering applications. Nevertheless, the design of FC requires a large number of experiments to determine the appropriate Compressive Strength (CS). Employment of machine learning algorithms to take advantage of the existing experiments database has been attempted, but model performance can still be improved. In this study, the performance of an Artificial Neural Network (ANN) was fully analyzed to predict the 28 days CS of FC. Monte Carlo simulations (MCS) were used to statistically analyze the convergence of the modeled results under the effect of random sampling strategies and the network structures selected. Various statistical measures such as Coefficient of Determination (R2), Mean Absolute Error (MAE), and Root Mean Squared Error (RMSE) were used for validation of model performance. The results show that ANN is a highly efficient predictor of the CS of FC, achieving a maximum R2 value of 0.976 on the training part and an R2 of 0.972 on the testing part, using the optimized C-ANN-[3,4,5,1] structure, which compares with previous published studies. In addition, a sensitivity analysis using Partial Dependence Plots (PDP) over 1000 MCS was also performed to interpret the relationship between the input parameters and 28 days CS of FC. Dry density was found as the variable with the highest impact to predict the CS of FC. The results presented could facilitate and enhance the use of C-ANN in other civil engineering-related problems.

| S-EPMC7084645 | biostudies-literature

High Strength Concrete Columns under Axial Compression Load: Hybrid Confinement Efficiency of High Strength Transverse Reinforcement and Steel Fibers.

Project description:Addition of steel fibers to high strength concrete (HSC) improves its post-peak behavior and energy absorbing capability, which can be described well in term of toughness. This paper attempts to obtain both analytically and experimentally the efficiency of steel fibers in HSC columns with hybrid confinement of transverse reinforcement and steel fibers. Toughness ratio (TR) to quantify the confinement efficiency of HSC columns with hybrid confinement is proposed through a regression analysis by involving sixty-nine TRs of HSC without steel fibers and twenty-seven TRs of HSC with hybrid of transverse reinforcement and steel fibers. The proposed TR equation was further verified by compression tests of seventeen HSC columns conducted in this study, where twelve specimens were reinforced by high strength rebars in longitudinal and transverse directions. The results show that the efficiency of steel fibers in concrete depends on transverse reinforcement spacing, where the steel fibers are more effective if the spacing transverse reinforcement becomes larger in the range of 0.25-1 effective depth of the section column. Furthermore, the axial load-strain curves were developed by employing finite element software (OpenSees) for simulating the response of the structural system. Comparisons between numerical and experimental axial load-strain curves were carried out.

| S-EPMC5502928 | biostudies-other

Bearing Strength of Crumb Rubber Concrete under Partial Area Loading.

Project description:The application of waste tire rubber as aggregates in concrete can help to reduce carbon emissions and achieve green gross domestic product (GDP). However, civil engineers still have concerns about using rubberized concrete in structural members. For the safety of structures, the bearing strength of concrete is a very important parameter to be considered in the design. This paper presented the first experimental and numerical study on the bearing strength of crumb rubber concrete. Prisms of both normal concrete and crumb rubber concrete were tested with loading plates of varying sizes. The test results show that the failure modes and deformation behavior of crumb rubber concrete specimens with different rubber contents were similar to those of normal concrete, and the bearing strength of crumb rubber concrete can be well predicted by current standards for normal concrete. Finite element analysis was performed to further determine the effect of rubber content on the bearing strength of concrete. Proper parameter values for modeling crumb rubber concrete by the concrete damaged plasticity model were investigated. Through the numerical analysis, the reason the rubber content does not have an important effect on the bearing strength of crumb rubber concrete with similar compressive strength was found to be that the influence of rubber content on the tri-axial compression behavior of concrete and the ratio of concrete tensile strength to compressive strength is small. The experimental and numerical results presented in this study provide the insights needed to guide the design of structures utilizing crumb rubber concrete.

| S-EPMC7321083 | biostudies-literature

Creep behavior of reinforced concrete-filled steel tubular columns under axial compression.

Project description:The reinforced concrete-filled steel tube (RCFST) column solves several of the problems of the concrete-filled steel tube (CFST) column in practical engineering applications. Moreover, RCFST has a simple joint structure, high bearing capacity, good ductility, and superior fire resistance. From a structural safety perspective, designers prioritize the creep performance of CFST members in structural design. Therefore, the creep behavior of RCFST columns should be thoroughly investigated in practical engineering design. To study the influence of the creep behavior of RCFST columns under axial compression, this work analyzed the mechanical behavior of composite columns based on their mechanical characteristics under axial compression and established a creep formula suitable for RCFST columns under axial compression. A creep analysis program was also developed to obtain the creep strain-time curve, and its correctness was verified by existing tests. On this basis, the effects of the main design parameters, such as the stress level, steel ratio, and reinforcement ratio, on the creep behavior were determined and analyzed. The creep of the tested composite columns increased rapidly in the early stages (28 days) of load action; the growth rate was relatively low after 28 days and tended to stabilize after approximately six months. The stress level had the greatest influence on the creep of RCFST columns under axial compression, followed by the steel ratio. The influence of the reinforcement ratio on the creep behavior was less. The results of this study can provide a reference for engineering practice.

| S-EPMC8452051 | biostudies-literature

Study on Ultrasonic Nondestructive Testing of Self-Compacting Concrete under Uniaxial Compression Test.

Project description:To study the variation law of ultrasonic parameters of self-compacting concrete before and after damage under uniaxial compression test conditions, the C30 self-compacting concrete blocks stored for 7 days and 28 days were subjected to ultrasonic nondestructive testing, and the variation law of the sound time, amplitude, and sound velocity before and after the damage of self-compacting concrete blocks was emphatically analyzed. The concrete acoustic detection software was introduced to judge and analyze the abnormal values of the parameters of each measuring point, and the defect distribution map of each test block was obtained. The results showed that after curing the self-compacting concrete test block for 7 days and 28 days, the average value of sound time before and after the failure of each measuring point of the test block is small, and the average value of sound time before the failure is less than that after; the average amplitude after failure is smaller than that before failure, and the amplitude of some measuring points will be smaller than that before. The average sound velocity after failure is less than that before failure, and the internal defects appear and the structure is not dense. This study provides a theoretical basis for the application of ultrasonic detection technology in the field of self-compacting concrete and also provides a practical basis for the stability monitoring and failure warning of self-compacting concrete.

| S-EPMC9267734 | biostudies-literature

Behavior of Hybrid Reinforced Concrete Bridge Decks under Static and Fatigue Loading.

Project description:This paper presents a new bridge deck reinforcement alternative using hybrid reinforced concrete (Hybrid) consisting of Glass Fiber Reinforced Polymer (GFRP) rebar and alkali-resistant fiberglass composite macrofibers added to the concrete mixture. Fiberglass composite macrofibers are a miniaturized GFRP reinforcing bar that is a composite of resin and glass fibers. An experimental testing program and analytical modeling were conducted to evaluate the structural performance at the service and ultimate limit states. Thirteen full-scale bridge deck specimens were constructed and tested under static and fatigue loading. The fatigue loading was applied up to two million cycles at a frequency of 4 Hz. Post-fatigue, the specimens were tested to failure to compare pre-and post-fatigue behavior. Simplified and moment-curvature analytical models were used to predict the specimens' flexural strength at the ultimate level, and both were found to be accurate for predicting pre- and post-fatigue strength. Deflection and crack width were monitored throughout the fatigue loading, and these values were compared to the recommended AASHTO LRFD serviceability limits. Testing and analytical results showed that the Hybrid deck is a viable alternative to steel-reinforced and GFRP-reinforced bridge decks for flexural behavior. The service and ultimate level behavior of each bridge deck type was adequate as compared to the AASHTO LRFD service limits. The exceptional post-peak energy absorption demonstrated by the Hybrid adds ductility to previously elastic GFRP reinforced sections.

| S-EPMC9740706 | biostudies-literature

Forecasting Compressive Strength of RHA Based Concrete Using Multi-Expression Programming.

Project description:Rice husk ash (RHA) is a significant pollutant produced by agricultural sectors that cause a malignant outcome to the environment. To encourage the re-use of RHA, this work used multi expression programming (MEP) to construct an empirical model for forecasting the compressive nature of concrete made with RHA (CRHA) as a cement substitute. Thus, the compressive strength of CRHA was developed comprising of 192 findings from the broad and trustworthy database obtained from literature review. The most significant characteristics, namely the specimen's age, the percentage of RHA, the amount of cement, superplasticizer, aggregates, and the amount of water, were used as input for the modeling of CRHA. External validation, sensitivity analysis, statistical checks, and Shapley Additive Explanations (SHAP) analysis were used to evaluate the models' performance. It was discovered that the most significant factors impacting the compressive strength of CRHA are the age of the concrete sample (AS), the amount of cement (C) and the amount of aggregate (A). The findings of this study have the potential to increase the re-use of RHA in the production of green concrete, hence promoting environmental protection and financial gain.

| S-EPMC9181226 | biostudies-literature

The dataset about the deformations under axial compression of concrete and cement-sand mortar impregnated with oil.

Project description:This article contains data of longitudinal and transverse deformations of concrete and cement-sand prisms impregnated with mineral I-30A, corn and olive oil, under axial compression up to loads that do not create destructive stresses. The stress level, as the ratio of the compressive stress ? to the design compressive strength R b , varied from 0.054 ?/R b to 0.845 ?/R b . The values of deformation for various axial compression loads are presented for control samples and for samples impregnated with mineral oil I-30A with a viscosity of 15 °E, corn oil with a viscosity of 9 °E, and olive oil with a viscosity of 11 °E on Engler scale. The data are associated with the research article "Influence of viscosity of vegetable and mineral oil on deformation properties of concrete and cement-sand mortar" (Alexander et al., 2018).

| S-EPMC6234250 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data