Browse
Submit Data
Databases
API
Help

Dataset Information

28 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Ni3S2 in Situ Grown on Ni Foam Coupled with Nitrogen-Doped Carbon Nanotubes as an Efficient Electrocatalyst for the Hydrogen Evolution Reaction in Alkaline Solution.

ABSTRACT: Searching for a highly efficient electrocatalyst for the hydrogen evolution reaction (HER) in alkaline solution is still challenging. In this work, we report a HER electrocatalyst composed of Ni foam, Ni3S2, and nitrogen-doped carbon nanotubes (NF@Ni3S2@NCNTs). The good lattice matching between Ni and Ni3S2, interstitial doping of C and N atoms, and synergistic effect of NCNTs make NF@Ni3S2@NCNTs highly efficient HER electrocatalysts in alkaline solution. NF@Ni3S2@NCNTs exhibit an overpotential of 93.89 mV at a current density of 10 mA cm-2, a Tafel slope of 54 mV dec-1, and superior stability for HER in 1 M KOH solution. Our findings will promote the reasonable design and synthesis of an efficient electrocatalyst for HER in alkaline electrolytes.

SUBMITTER: Zhou W

PROVIDER: S-EPMC6893947 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Morphology controlled synthesis of 2-D Ni–Ni3S2 and Ni3S2 nanostructures on Ni foam towards oxygen evolution reaction

Project description:Catalysts for oxygen evolution reactions (OER) are at the heart of key renewable energy technologies, and development of non-precious metal catalysts with high activity and stability remain a great challenge in this field. Among various material candidates, metal sulfides are receiving increasing attention. While morphology-dependent catalytic performances are well established in noble metal-based catalysts, relatively little is known for the morphology‒catalytic performance relationship in metal sulfide catalysts. In this study, uniform spider web-like Ni nanosheets–Ni3S2 and honeycomb-like Ni3S2 structures are deposited on nickel foam (Ni3S2/NF) by a facile one-step hydrothermal synthetic route. When used as an oxygen evolution electrode, the spider web-like Ni–Ni3S2/NF with the large exposed surface area shown excellent catalytic activity and stability with an overpotential of ~310 mV to achieve at 10 mA/cm2 and a Tafel slope of 63 mV/dec in alkaline media, which is superior to the honeycomb-like structure without Ni nanosheet. The low Tafel slope of the spider web-like Ni–Ni3S2/NF represents one of the best OER kinetics among nickel sulfide-based OER catalysts. The results point to the fact that performance of the metal sulfide electrocatalysts might be fine-tuned and optimized with morphological controls. Electronic supplementary material The online version of this article (doi:10.1186/s40580-017-0101-6) contains supplementary material, which is available to authorized users.

| S-EPMC6141903 | biostudies-literature

Hierarchical Ni-Co-O-C-P hollow tetragonal microtubes grown on Ni foam for efficient overall water splitting in alkaline media.

Project description:Exploring low-cost and highly efficient non-noble bifunctional electrocatalysts with high performances for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is essential for large-scale sustainable energy systems. Herein, the Ni-Co-O-C-P hollow tetragonal microtubes grown on 3D Ni foam (Ni-Co-O-C-P/NF) was synthesized via a one-step solvothermal method and followed by a simple carbon coating and in situ phosphorization treatment. Benefiting from the unique open and hierarchical nano-architectures, the as prepared Ni-Co-O-C-P/NF presents a high activity and durability for both the HER and OER in alkaline media. The overall-water-splitting reaction requires a low cell voltage (1.54 V @ 10 mA cm-2) in 1 M KOH when Ni-Co-O-C-P/NF is used as both the anode and cathode. The highly flexible structure can provide a large amount of exposed active sites and shorten the mass transport distance. Furthermore, bimetallic phosphides also favor the electrocatalysis due to the higher electronic conductivity and the synergetic effect. This work demonstrated a promising bifunctional electrocatalyst for water electrolysis in alkaline media with potential in future applications.

| S-EPMC9070315 | biostudies-literature

Spinel oxide CoFe2O4 grown on Ni foam as an efficient electrocatalyst for oxygen evolution reaction.

Project description:The effect of the oxygen evolution reaction (OER) is important in water splitting. In this work, we develop sphere-like morphology spinel oxide CoFe2O4/NF by hydrothermal reaction and calcination, and the diameter of the spheres is about 111.1 nm. The CoFe2O4/NF catalyst exhibits excellent electrocatalytic performance with an overpotential of 273 mV at a current density of 10 mA cm-2 and a Tafel slope of 78 mV dec-1. The cycling stability of CoFe2O4/NF is remarkable, and it only increased by 5 mV at a current density of 100 mA cm-2 after 3000 cycles. Therefore, this simple method to prepare CoFe2O4/NF can enhance the OER properties of electrocatalysts, which makes CoFe2O4/NF a promising material to replace noble metal-based catalysts for the oxygen evolution reaction.

| S-EPMC9063757 | biostudies-literature

In situ formation of molecular Ni-Fe active sites on heteroatom-doped graphene as a heterogeneous electrocatalyst toward oxygen evolution.

Project description:Molecularly well-defined Ni sites at heterogeneous interfaces were derived from the incorporation of Ni2+ ions into heteroatom-doped graphene. The molecular Ni sites on graphene were redox-active. However, they showed poor activity toward oxygen evolution reaction (OER) in KOH aqueous solution. We demonstrated for the first time that the presence of Fe3+ ions in the solution could bond at the vicinity of the Ni sites with a distance of 2.7 Å, generating molecularly sized and heterogeneous Ni-Fe sites anchored on doped graphene. These Ni-Fe sites exhibited markedly improved OER activity. The Pourbaix diagram confirmed the formation of the Ni-Fe sites and revealed that the Ni-Fe sites adsorbed HO- ions with a bridge geometry, which facilitated the OER electrocatalysis.

| S-EPMC5844707 | biostudies-literature

Mo-Doped Cu2S Multilayer Nanosheets Grown In Situ on Copper Foam for Efficient Hydrogen Evolution Reaction.

Project description:Metal sulfide electrocatalyst is developed as a cost-effective and promising candidate for hydrogen evolution reaction (HER). In this work, we report a novel Mo-doped Cu2S self-supported electrocatalyst grown in situ on three-dimensional copper foam via a facile sulfurization treatment method. Interestingly, Mo-Cu2S nanosheet structure increases the electrochemically active area, and the large fleecy multilayer flower structure assembled by small nanosheet facilitates the flow of electrolyte in and out. More broadly, the introduction of Mo can adjust the electronic structure, significantly increase the volmer step rate, and accelerate the reaction kinetics. As compared to the pure Cu2S self-supported electrocatalyst, the Mo-Cu2S/CF show much better alkaline HER performance with lower overpotential (18 mV at 10 mA cm-2, 322 mV at 100 mA cm-2) and long-term durability. Our work constructs a novel copper based in-situ metal sulfide electrocatalysts and provides a new idea to adjust the morphology and electronic structure by doping for promoting HER performance.

| S-EPMC9501039 | biostudies-literature

Mo-doped ZnO nanoflakes on Ni-foam for asymmetric supercapacitor applications.

Project description:A single-step hydrothermal route for synthesizing molybdenum doped zinc oxide nanoflakes was employed to accomplish superior electrochemical characteristics, such as a specific capacitance of 2296 F g-1 at current density of 1 A g-1 and negligible loss in specific capacitance of 0.01025 F g-1 after each charge-discharge cycle (up to 8000 cycles). An assembled asymmetric supercapacitor (Mo:ZnO@NF//AC@NF) also exhibited a maximum energy density and power density of 39.06 W h/kg and 7425 W kg-1, respectively. Furthermore, it demonstrated a specific capacitance of 123 F g-1 at 1 A g-1 and retained about 75.6% of its initial capacitance after 8000 cycles. These superior electrochemical characteristics indicate the potential of this supercapacitor for next-generation energy storage devices.

| S-EPMC9070622 | biostudies-literature

Ni foam electrode solution impregnated with Ni-Fe X (OH) Y catalysts for efficient oxygen evolution reaction in alkaline electrolyzers.

Project description:Oxygen evolution reaction (OER) is a demanding step within the water splitting process for its requirement of a high overpotential. Thus, to overcome this unfavourable kinetics, an efficient catalyst is required to expedite the process. In this context, we report on Ni foam functionalised with low cost iron (Fe) and iron hydroxide (Fe(OH) X ), wet chemically synthesized as OER catalysts. The prepared catalyst based on iron hydroxide precipitate shows a promising performance, exhibiting an overpotential of 270 mV (at a current density of 10 mA cm-2 in 1 M KOH solution), an efficient Tafel slope of ∼50 mV dec-1 and stable chronopotentiometry. The promising performance of the anode was further reproduced in the overall water splitting reaction with a two electrode cell. The overall reaction requires a lower potential of 1.508 V to afford 10 mA cm-2, corresponding to 81.5% electrical to fuel efficiency.

| S-EPMC9055272 | biostudies-literature

Ni2P nanocrystals embedded Ni-MOF nanosheets supported on nickel foam as bifunctional electrocatalyst for urea electrolysis.

Project description:It's highly desired but challenging to synthesize self-supporting nanohybrid made of conductive nanoparticles with metal organic framework (MOF) materials for the application in the electrochemical field. In this work, we report the preparation of Ni2P embedded Ni-MOF nanosheets supported on nickel foam through partial phosphidation (Ni2P@Ni-MOF/NF). The self-supporting Ni2P@Ni-MOF/NF was directly tested as electrode for urea electrolysis. When served as anode for urea oxidation reaction (UOR), it only demands 1.41 V (vs RHE) to deliver a current of 100 mA cm-2. And the overpotential of Ni2P@Ni-MOF/NF to reach 10 mA cm-2 for hydrogen evolution reaction HER was only 66 mV, remarkably lower than Ni2P/NF (133 mV). The exceptional electrochemical performance was attributed to the unique structure of Ni2P@Ni-MOF and the well exposed surface of Ni2P. Furthermore, the Ni2P@Ni-MOF/NF demonstrated outstanding longevity for both HER and UOR. The electrolyzer constructed with Ni2P@Ni-MOF/NF as bifunctional electrode can attain a current density of 100 mA cm-2 at a cell voltage as low as 1.65 V. Our work provides new insights for prepare MOF based nanohydrid for electrochemical application.

| S-EPMC8560839 | biostudies-literature

Implanting Ni-O-VOx sites into Cu-doped Ni for low-overpotential alkaline hydrogen evolution.

Project description:Nickel-based catalysts are most commonly used in industrial alkaline water electrolysis. However, it remains a great challenge to address the sluggish reaction kinetics and severe deactivation problems of hydrogen evolution reaction (HER). Here, we show a Cu-doped Ni catalyst implanted with Ni-O-VOx sites (Ni(Cu)VOx) for alkaline HER. The optimal Ni(Cu)VOx electrode exhibits a near-zero onset overpotential and low overpotential of 21?mV to deliver -10?mA?cm-2, which is comparable to benchmark Pt/C catalyst. Evidence for the formation of Ni-O-VOx sites in Ni(Cu)VOx is established by systematic X-ray absorption spectroscopy studies. The VOx can cause a substantial dampening of Ni lattice and create an enlarged electrochemically active surface area. First-principles calculations support that the Ni-O-VOx sites are superactive and can promote the charge redistribution from Ni to VOx, which greatly weakens the H-adsorption and H2 release free energy over Ni. This endows the Ni(Cu)VOx electrode high HER activity and long-term durability.

| S-EPMC7264301 | biostudies-literature

Direct One-Step Growth of Bimetallic Ni2Mo3N on Ni Foam as an Efficient Oxygen Evolution Electrocatalyst.

Project description:A simple and economical synthetic route for direct one-step growth of bimetallic Ni2Mo3N nanoparticles on Ni foam substrate (Ni2Mo3N/NF) and its catalytic performance during an oxygen evolution reaction (OER) are reported. The Ni2Mo3N/NF catalyst was obtained by annealing a mixture of a Mo precursor, Ni foam, and urea at 600 °C under N2 flow using one-pot synthesis. Moreover, the Ni2Mo3N/NF exhibited high OER activity with low overpotential values (336.38 mV at 50 mA cm-2 and 392.49 mV at 100 mA cm-2) and good stability for 5 h in Fe-purified alkaline electrolyte. The Ni2Mo3N nanoparticle surfaces converted into amorphous surface oxide species during the OER, which might be attributed to the OER activity.

| S-EPMC8398334 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data