Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Enhancement of the Power Conversion Efficiency of Organic Solar Cells by Surface Patterning of Azobenzene Thin Films.

ABSTRACT: Nanoscale-patterned azobenzene thin films were incorporated in organic solar cells to scatter incident light, thus increasing the optical path length of photons inside the active area. This ultimately led to significant power conversion efficiency (PCE) enhancements in the active layer. Specifically, the azobenzene thin films were patterned with two-dimensional crossed surface relief gratings inscribed via laser interference lithography. The patterned films were then bleached and thermally stabilized by exposure to strong ultraviolet light before being incorporated in P3HT:PC61BM and PTB7:PC61BM solar cells. The fabricated solar cells exhibited a PCE enhancement of 133%, from 1.37 to 3.19%, for P3HT:PC61BM solar cells, and a PCE enhancement of 302%, from 0.53 to 2.13%, for PTB7:PC61BM solar cells.

SUBMITTER: Tadeson G

PROVIDER: S-EPMC6933583 | biostudies-literature | 2019 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Enhancement of the Power Conversion Efficiency of Organic Solar Cells by Surface Patterning of Azobenzene Thin Films.

Tadeson Genevieve G Sabat Ribal Georges RG

ACS omega 20191213 26

Nanoscale-patterned azobenzene thin films were incorporated in organic solar cells to scatter incident light, thus increasing the optical path length of photons inside the active area. This ultimately led to significant power conversion efficiency (PCE) enhancements in the active layer. Specifically, the azobenzene thin films were patterned with two-dimensional crossed surface relief gratings inscribed via laser interference lithography. The patterned films were then bleached and thermally stabi ...[more]

PMID: 31891064

Similar Datasets

Increase of power conversion efficiency in dye-sensitized solar cells through ferroelectric substrate induced charge transport enhancement.

Project description:Ferroelectric functionalized dye-sensitized solar cells were fabricated by using a positively-poled LiNbO3 substrate coated with ITO (ITO-LiNbO3) as a collector electrode and demonstrated enhanced power conversion efficiency. Surface potential properties of TiO2 nanoparticle film coated on the ITO-LiNbO3 (TiO2/ITO-LiNbO3) examined by Kelvin probe force microscopy (KPFM) confirmed that a large electric field (a few 10 V/µm) generated from LiNbO3 can penetrate through the ITO layer and is applied to TiO2 film. This polarization-induced electric field leads to an increased photocurrent density by attracting and promoting electrons to direct transport through the mesoporous TiO2 network toward the collector electrode and a decreased charge recombination by facilitating electrons to pass through fewer boundaries of nanoparticles, resulting in high power conversion efficiency. The power conversion efficiency was enhanced by more than 40% in comparison with that without polarization-induced electric field. Incorporating functional ferroelectrics into photovoltaic cells would be a good strategy in improving photovoltaic performance and is applicable to other types of photovoltaic devices, such as perovskite solar cells.

| S-EPMC6255840 | biostudies-literature

Impact of charge transport on current-voltage characteristics and power-conversion efficiency of organic solar cells.

Project description:This work elucidates the impact of charge transport on the photovoltaic properties of organic solar cells. Here we show that the analysis of current-voltage curves of organic solar cells under illumination with the Shockley equation results in values for ideality factor, photocurrent and parallel resistance, which lack physical meaning. Drift-diffusion simulations for a wide range of charge-carrier mobilities and illumination intensities reveal significant carrier accumulation caused by poor transport properties, which is not included in the Shockley equation. As a consequence, the separation of the quasi Fermi levels in the organic photoactive layer (internal voltage) differs substantially from the external voltage for almost all conditions. We present a new analytical model, which considers carrier transport explicitly. The model shows excellent agreement with full drift-diffusion simulations over a wide range of mobilities and illumination intensities, making it suitable for realistic efficiency predictions for organic solar cells.

| S-EPMC4421856 | biostudies-literature

Key Parameters Requirements for Non-Fullerene-Based Organic Solar Cells with Power Conversion Efficiency >20.

Project description:The reported power conversion efficiencies (PCEs) of nonfullerene acceptor (NFA) based organic photovoltaics (OPVs) now exceed 14% and 17% for single-junction and two-terminal tandem cells, respectively. However, increasing the PCE further requires an improved understanding of the factors limiting the device efficiency. Here, the efficiency limits of single-junction and two-terminal tandem NFA-based OPV cells are examined with the aid of a numerical device simulator that takes into account the optical properties of the active material(s), charge recombination effects, and the hole and electron mobilities in the active layer of the device. The simulations reveal that single-junction NFA OPVs can potentially reach PCE values in excess of 18% with mobility values readily achievable in existing material systems. Furthermore, it is found that balanced electron and hole mobilities of >10-3 cm2 V-1 s-1 in combination with low nongeminate recombination rate constants of 10-12 cm3 s-1 could lead to PCE values in excess of 20% and 25% for single-junction and two-terminal tandem OPV cells, respectively. This analysis provides the first tangible description of the practical performance targets and useful design rules for single-junction and tandem OPVs based on NFA materials, emphasizing the need for developing new material systems that combine these desired characteristics.

| S-EPMC6498106 | biostudies-other

Significant enhancement of power conversion efficiency for dye sensitized solar cell using 1D/3D network nanostructures as photoanodes.

Project description:The single-crystalline TiO2 nanorod arrays with rutile phase have attracted much attention in the dye sensitized solar cells (DSSCs) applications because of their superior chemical stability, better electron transport properties, higher refractive index and low production cost. However, it suffers from a low surface area as compared with TiO2 nanoparticle films. In order to enlarge the surface area of TiO2 nanorod arrays, the 1D nanorods/3D nanotubes sample was synthesized using a facile two-step hydrothermal process involving hydrothermal growth 1D/3D nanorods and followed by post-etching treatment. In such bi-layer structure, the oriented TiO2 nanorods layer could provide direct pathway for fast electron transportation, and the 3D nanotubes layer offers a higher surface area for dye loading, therefore, the 1D nanorods/3D nanotubes photoanode exhibited faster electron transport and higher surface area than either 1D or 3D nanostructures alone, and an highest efficiency of 7.68% was achieved for the DSSCs based on 1D nanorods/3D nanotubes photoanode with further TiCl4 treatment.

| S-EPMC4371153 | biostudies-literature

A polymer tandem solar cell with 10.6% power conversion efficiency.

Project description:An effective way to improve polymer solar cell efficiency is to use a tandem structure, as a broader part of the spectrum of solar radiation is used and the thermalization loss of photon energy is minimized. In the past, the lack of high-performance low-bandgap polymers was the major limiting factor for achieving high-performance tandem solar cell. Here we report the development of a high-performance low bandgap polymer (bandgap <1.4 eV), poly[2,7-(5,5-bis-(3,7-dimethyloctyl)-5H-dithieno[3,2-b:2',3'-d]pyran)-alt-4,7-(5,6-difluoro-2,1,3-benzothia diazole)] with a bandgap of 1.38 eV, high mobility, deep highest occupied molecular orbital. As a result, a single-junction device shows high external quantum efficiency of >60% and spectral response that extends to 900 nm, with a power conversion efficiency of 7.9%. The polymer enables a solution processed tandem solar cell with certified 10.6% power conversion efficiency under standard reporting conditions (25 °C, 1,000 Wm(-2), IEC 60904-3 global), which is the first certified polymer solar cell efficiency over 10%.

| S-EPMC3660643 | biostudies-literature

Reversible Regulation of Polar Gas Molecules by Azobenzene-Based Photoswitchable Metal-Organic Framework Thin Films.

Project description:The development of tunable molecule separation membranes requires materials with remote controllability and ultra-high separation capability. In this paper, a novel photoswitchable metal organic framework (MOF) thin film (Cu2(AzoBPDC)2) was prepared by liquid phase epitaxial layer-by-layer assembly to realize the reversible remote-controlled switching. The azobenzene side groups in the Cu2(AzoBPDC)2 thin film showed excellent reversible photoswitching performance under UV (365 nm) and Vis (450 nm) irradiation, achieving the remote-controlled mode of the diffusion flux of polar gas molecules in the MOF thin film.

| S-EPMC9860582 | biostudies-literature

From Straw to Device Interface: Carboxymethyl-Cellulose-Based Modified Interlayer for Enhanced Power Conversion Efficiency of Organic Solar Cells.

Project description:Advanced interface materials made from petrochemical resources have been extensively investigated for organic solar cells (OSCs) over the past decades. These interface materials have demonstrated excellent performances in OSC devices. However, the limited resources, high-cost, and non-ecofriendly nature of petrochemical-based interface materials restrict their commercial applications. Here, a facile and effective approach to prepare cellulose and its derivatives as a cathode interface layer for OSCs with enhanced performance from rice straw of agroforestry residues is demonstrated. By employing this carboxymethyl cellulose sodium (CMC) into OSCs, a highly efficient inverted OSC is constructed, and a power conversion efficiency (PCE) of 12.01% is realized using poly[(2,6-(4,8-bis(5-(2-ethyl-hexyl)-thiophen-2-yl)-benzo[1,2-b:4,5-b'] dithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5',7-bis(2-ethylhexyl)benzo[1',2'-c: 4',5'-c']dithiophene-4,8-dione): 3,9-bis(2-methylene-((3-(1, 1-dicyanomethylene)-6/7-methyl)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d: 2',3'-d']-s-indaceno[1,2-b: 5, 6-b']dithiophene as the active layer, which shows over 9.4% improvement in PCE compared to that of a device without the CMC layer (PCE = 10.98%), especially the enhancement in short-circuit current. The improved current densities and PCEs are attributed to the reduced work function, enhanced absorption, and improved interfacial contact by using CMC and ZnO as co-interface. This approach of fabricating interface materials from biorenewable sources for OSCs is simple, scalable, and cost-effective, representing a promising direction for the development of smart interface and green electronics.

| S-EPMC6974931 | biostudies-literature

Solution-processed small-molecule solar cells: breaking the 10% power conversion efficiency.

Project description:A two-dimensional conjugated small molecule (SMPV1) was designed and synthesized for high performance solution-processed organic solar cells. This study explores the photovoltaic properties of this molecule as a donor, with a fullerene derivative as an acceptor, using solution processing in single junction and double junction tandem solar cells. The single junction solar cells based on SMPV1 exhibited a certified power conversion efficiency of 8.02% under AM 1.5 G irradiation (100 mW cm(-2)). A homo-tandem solar cell based on SMPV1 was constructed with a novel interlayer (or tunnel junction) consisting of bilayer conjugated polyelectrolyte, demonstrating an unprecedented PCE of 10.1%. These results strongly suggest solution-processed small molecular materials are excellent candidates for organic solar cells.

| S-EPMC3842540 | biostudies-literature

Predicting Power Conversion Efficiency of Organic Photovoltaics: Models and Data Analysis.

Project description:In this paper, the ability of three selected machine learning neural and baseline models in predicting the power conversion efficiency (PCE) of organic photovoltaics (OPVs) using molecular structure information as an input is assessed. The bidirectional long short-term memory (gFSI/BiLSTM), attentive fingerprints (attentive FP), and simple graph neural networks (simple GNN) as well as baseline support vector regression (SVR), random forests (RF), and high-dimensional model representation (HDMR) methods are trained to both the large and computational Harvard clean energy project database (CEPDB) and the much smaller experimental Harvard organic photovoltaic 15 dataset (HOPV15). It was found that the neural-based models generally performed better on the computational dataset with the attentive FP model reaching a state-of-the-art performance with the test set mean squared error of 0.071. The experimental dataset proved much harder to fit, with all of the models exhibiting a rather poor performance. Contrary to the computational dataset, the baseline models were found to perform better than the neural models. To improve the ability of machine learning models to predict PCEs for OPVs, either better computational results that correlate well with experiments or more experimental data at well-controlled conditions are likely required.

| S-EPMC8459373 | biostudies-literature

Ultrasonic Studies of Solid Azobenzene-Decorated Polymer Thin Films.

Project description:This work investigates the effect of ultrasound on switching of cis azobenzene isomers to their trans counterparts in solid films of methyl methacrylate and methacryloyloxyazobenzene copolymers [P(MMA/MOAB)]. Ultraviolet-visible and 1H nuclear magnetic resonance spectroscopies demonstrate that 46% of the cis isomer converts to the trans form purely by ultrasonic agitation and 46% converts to the trans isomer by localized ultrasound-induced heating effects. Comparative studies of isomerization by ultrasound wave, heat, and visible irradiation show that ultrasound exposure requires a longer time to switch the cis-to-trans conformation. The estimated activation energy for the cis-to-trans conversion in solid polymer films is shown to be comparable to previous values of azobenzene isomerization, indicating that incorporation of the chromophore in a polymeric system affects the kinetics of transition but not the barriers to conformational change.

| S-EPMC6644014 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data