Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

General Growth of Carbon Nanotubes for Cerium Redox Reactions in High-Efficiency Redox Flow Batteries.

ABSTRACT: Carbon nanotubes (CNTs) possess remarkable mechanical, electrical, thermal, and optical properties that predestine them for numerous potential applications. The conventional chemical vapor deposition (CVD) route for the production of CNTs, however, suffers from costly and complex issues. Herein, we demonstrate a general and high-yield strategy to grow nitrogen-doped CNTs (NCNTs) on three-dimensional (3D) graphite felt (GF) substrates, through a direct thermal pyrolysis process simply using a common tube furnace, instead of the costly and complex CVD method. Specifically, the NCNTs-decorated GF (NCNT-GF) electrode possesses enhanced electrocatalytic performance towards cerium redox reactions, mainly due to the catalytic effect of N atoms doped into NCNTs, and ingenious and hierarchical 3D architecture of the NCNT-GF. As a result, the cell with the NCNT-GF serving as a positive electrode shows the improved energy efficiency with increases of about 53.4% and 43.8% over the pristine GF and the acidly treated GF at a high charge/discharge rate of 30?mA?cm-2, respectively. Moreover, the as-prepared NCNT catalyst-enhanced electrode is found to be highly robust and should enable a long-term cycle without detectable efficiency loss after 500 cycles. The viable synthetic strategy reported in this study will contribute to the further development of more active heteroatom-doped CNTs for redox flow batteries.

SUBMITTER: Na Z

PROVIDER: S-EPMC6946258 | biostudies-literature | 2019

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Room Temperature, Hybrid Sodium-Based Flow Batteries with Multi-Electron Transfer Redox Reactions.

Project description:We introduce a new concept of hybrid Na-based flow batteries (HNFBs) with a molten Na alloy anode in conjunction with a flowing catholyte separated by a solid Na-ion exchange membrane for grid-scale energy storage. Such HNFBs can operate at ambient temperature, allow catholytes to have multiple electron transfer redox reactions per active ion, offer wide selection of catholyte chemistries with multiple active ions to couple with the highly negative Na alloy anode, and enable the use of both aqueous and non-aqueous catholytes. Further, the molten Na alloy anode permits the decoupled design of power and energy since a large volume of the molten Na alloy can be used with a limited ion-exchange membrane size. In this proof-of-concept study, the feasibility of multi-electron transfer redox reactions per active ion and multiple active ions for catholytes has been demonstrated. The critical barriers to mature this new HNFBs have also been explored.

| S-EPMC4463013 | biostudies-literature

SPEEK Membrane of Ultrahigh Stability Enhanced by Functionalized Carbon Nanotubes for Vanadium Redox Flow Battery.

Project description:Proton exchange membrane is the key factor of vanadium redox flow battery (VRB) as their stability largely determine the lifetime of the VRB. In this study, a SPEEK/MWCNTs-OH composite membrane with ultrahigh stability is constructed by blending sulfonated poly(ether ether ketone) (SPEEK) with multi-walled carbon nanotubes toward VRB application. The carbon nanotubes disperse homogeneously in the SPEEK matrix with the assistance of hydroxyl group. The blended membrane exhibits 94.2 and 73.0% capacity retention after 100 and 500 cycles, respectively in a VRB single cell with coulombic efficiency of over 99.4% at 60 mA cm-2 indicating outstanding capability of reducing the permeability of vanadium ions and enhancing the transport of protons. The ultrahigh stability and low cost of the composite membrane make it a competent candidate for the next generation larger-scale vanadium redox flow battery.

| S-EPMC6094973 | biostudies-literature

Redox-Flow Batteries: From Metals to Organic Redox-Active Materials.

Project description:Research on redox-flow batteries (RFBs) is currently experiencing a significant upturn, stimulated by the growing need to store increasing quantities of sustainably generated electrical energy. RFBs are promising candidates for the creation of smart grids, particularly when combined with photovoltaics and wind farms. To achieve the goal of "green", safe, and cost-efficient energy storage, research has shifted from metal-based materials to organic active materials in recent years. This Review presents an overview of various flow-battery systems. Relevant studies concerning their history are discussed as well as their development over the last few years from the classical inorganic, to organic/inorganic, to RFBs with organic redox-active cathode and anode materials. Available technologies are analyzed in terms of their technical, economic, and environmental aspects; the advantages and limitations of these systems are also discussed. Further technological challenges and prospective research possibilities are highlighted.

| S-EPMC5248651 | biostudies-literature

Hierarchical Carbon Micro/Nanonetwork with Superior Electrocatalysis for High-Rate and Endurable Vanadium Redox Flow Batteries.

Project description:Vanadium redox flow batteries (VRFBs) are receiving increasing interest in energy storage fields because of their safety and versatility. However, the electrocatalytic activity of the electrode is a pivotal factor that still restricts the power and cycling capabilities of VRFBs. Here, a hierarchical carbon micro/nanonetwork (HCN) electrode codoped with nitrogen and phosphorus is prepared for application in VRFBs by cross-linking polymerization of aniline and physic acid, and subsequent pyrolysis on graphite felt. Due to the hierarchical electron pathways and abundant heteroatom active sites, the HCN exhibits superior electrocatalysis toward the vanadium redox couples and imparts the VRFBs with an outstanding energy efficiency and extraordinary stability after 2000 cycles at 250 mA cm-2 and a discharge capacity of 10.5 mA h mL-1 at an extra-large current density of 400 mA cm-2. Such a micro/nanostructure design will force the advancement of durable and high-power VRFBs and other electrochemical energy storage devices.

| S-EPMC6299713 | biostudies-literature

Smart Flow Electrosynthesis and Application of Organodisulfides in Redox Flow Batteries.

Project description:Electrochemical techniques have been recognized as an environmentally friendly and sustainable synthetic way to form organodisulfides. However, searching for optimum conditions which suffers from time/material-consuming caused by the uncertainty of reactant consumption has hindered its rapid and large-scale development. Inspired by advanced nonaqueous redox flow batteries (NARFBs) technology, it is proposed a smart flow electrosynthesis (SFE) method of organodisulfides that the voltage curve of NARFBs can be utilized as a precise indicator to reflect the desired information about reactants and distinguish the end point of reaction automatically. This electrochemical method also exhibits certain universality and scalability. Additionally, organodisulfides generated in electrolytes can be used as active species for NARFBs without further purification, and their electrochemical properties are easily adjusted by changing raw materials, which effectively alleviate the waste in complex synthesis steps for optimizing and designing active materials separately. An organodisulfide dervied from isopropyl alcohol and carbon disulfide shows excellent cycling life (1000 cycles) with low capacity fade rate (0.024% per cycle). Taking advantages of the inherent NARFBs, this work not only proves a SFE strategy, but also supplies a green and low-cost molecular engineering scheme for designing electroactive materials for energy storage.

| S-EPMC8728815 | biostudies-literature

Synergistic nanoarchitecture of mesoporous carbon and carbon nanotubes for lithium-oxygen batteries.

Project description:A rechargeable lithium-oxygen battery (LOB) operates via the electrochemical formation and decomposition of solid-state Li2O2 on the cathode. The rational design of the cathode nanoarchitectures is thus required to realize high-energy-density and long-cycling LOBs. Here, we propose a cathode nanoarchitecture for LOBs, which is composed of mesoporous carbon (MPC) integrated with carbon nanotubes (CNTs). The proposed design has the advantages of the two components. MPC provides sufficient active sites for the electrochemical reactions and free space for Li2O2 storage, while CNT forests serve as conductive pathways for electron and offer additional reaction sites. Results show that the synergistic architecture of MPC and CNTs leads to improvements in the capacity (~ 18,400 mAh g- 1), rate capability, and cyclability (~ 200 cycles) of the CNT-integrated MPC cathode in comparison with MPC.

| S-EPMC8184898 | biostudies-literature

Nanoscopic and Macro-Porous Carbon Nano-foam Electrodes with Improved Mass Transport for Vanadium Redox Flow Batteries.

Project description:Although free-standing sheets of multiwalled carbon nanotubes (MWCNT) can provide interesting electrochemical and physical properties as electrodes for redox flow batteries, the full potential of this class of materials has not been accessible as of yet. The conventional fabrication methods produce sheets with micro-porous and meso-porous structures, which significantly resist mass transport of the electrolyte during high-current flow-cell operation. Herein, we developed a method to fabricate high performance macro-porous carbon nano-foam free standing sheets (Puffy Fibers, PF), by implementing a freeze-drying step into our low cost and scalable surface-engineered tape-casting (SETC) fabrication method, and we show the improvement in the performance attained as compared with a MWCNT sheet lacking any macro pores (Tape-cast, TC). We attribute the higher performance attained by our in-lab fabricated PF papers to the presence of macro pores which provided channels that acted as pathways for electrolytic transport within the bulk of the electrode. Moreover, we propose an electrolytic transport mechanism to relate ion diffusivity to different pore sizes to explain the different modes of charge transfer in the negative and the positive electrolytes. Overall, the PF papers had a high wettability, high porosity, and a large surface area, resulting in improved electrochemical and flow-cell performances.

| S-EPMC6881356 | biostudies-literature

Do carbon nanotubes catalyse bromine/bromide redox chemistry?

Project description:The redox chemistries of both the bromide oxidation and bromine reduction reactions are studied at single multi-walled carbon nanotubes (MWCNTs) as a function of their electrical potential allowing inference of the electron transfer kinetics of the Br2/Br- redox couple, widely used in batteries. The nanotubes are shown to be mildly catalytic compared to a glassy carbon surface but much less as inferred from conventional voltammetry on porous ensembles of MWCNTs where the mixed transport regime masks the true catalytic response.

| S-EPMC8372536 | biostudies-literature

Facilitating Charge Reactions in Al-S Batteries with Redox Mediators.

Project description:The Al-S battery is a promising next-generation battery candidate due to high abundance of both aluminium and sulfur. However, the sluggish kinetics of the Al-S battery reactions produces very high overpotentials. Here, for the first time, it was demonstrated that the incorporation of redox mediators could dramatically improve the kinetics of Al-S batteries. On the example of iodide redox mediators, it was shown that the charging voltage of Al-S batteries could be decreased by about 0.23 V with as little as 2.3 wt% of redox mediator added as electrolyte additive. Control electrochemical measurements, without prior discharge of the battery, demonstrated that >97 % of the charge capacity was due to the desired oxidation of Al2 S3 and polysulfides, and X-ray diffraction experiments confirmed the formation of sulfur as the final charge product. The beneficial role of redox mediators was demonstrated with cheap and environmentally friendly electrolytes made of urea and AlCl3 . This work showed that dramatic performance improvements could be achieved with low concentration of electrolyte additives, and therefore, much further performance improvements could be sought by combining multiple additives.

| S-EPMC8453840 | biostudies-literature

Nanoporous aramid nanofibre separators for nonaqueous redox flow batteries.

Project description:Redox flow batteries are attractive for large-scale energy storage due to a combination of high theoretical efficiencies and decoupled power and energy storage capacities. Efforts to significantly increase energy densities by using nonaqueous electrolytes have been impeded by separators with low selectivities. Here, we report nanoporous separators based on aramid nanofibres, which are assembled using a scalable, low cost, spin-assisted layer-by-layer technique. The multilayer structure yields 5?±?0.5?nm pores, enabling nanofiltration with high selectivity. Further, surface modifications using polyelectrolytes result in enhanced performance. In vanadium acetylacetonate/acetonitrile-based electrolytes, the coated separator exhibits permeabilities an order of magnitude lower and ionic conductivities five times higher than those of a commercial separator. In addition, the coated separators exhibit exceptional stability, showing minimal degradation after more than 100?h of cycling. The low permeability translates into high coulombic efficiency in flow cell charge/discharge experiments performed at cycle times relevant for large-scale applications (5?h).

| S-EPMC6180111 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data