Dataset Information

Exploiting the Advantages of Molecular Tools for the Monitoring of Fungal Indoor Air Contamination: First Detection of Exophiala jeanselmei in Indoor Air of Air-Conditioned Offices.

ABSTRACT: Today, indoor air pollution is considered a public health issue. Among the impacting pollutants, indoor airborne fungi are increasingly highlighted. Most of the monitoring protocols are culture-based, but these are unable to detect the uncultivable and/or dead fraction or species suppressed by fast-growing fungi, even though this fraction could impact health. Among the contaminants suspected to be part of this fraction, Exophiala jeanselmei is an interesting case study. Known to be pathogenic, this black yeast grows in humid environments such as air-conditioning systems, where it has been previously detected using classical culture-based methods. However, until now, this fungus was never detected in indoor air in contact with these air-conditioning systems. This study shows the first detection of E. jeanselmei in indoor air collected from offices in contact with contaminated air-conditioning reservoirs. While its presence in indoor air could not be demonstrated with culture-based methods, it was found by real-time PCR and massive parallel sequencing. The latter also allowed obtaining a broader view on the fungal diversity in the tested samples. Similar approaches were applied on water samples collected from the conditioning reservoirs to trace the source of contamination. The comparison of results obtained with both methods confirmed that the molecular tools could improve indoor air monitoring, especially of dead and/or uncultivable contaminants or when competition between species could occur.

SUBMITTER: Libert X

PROVIDER: S-EPMC6955718 | biostudies-literature | 2019 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Exploiting the Advantages of Molecular Tools for the Monitoring of Fungal Indoor Air Contamination: First Detection of <i>Exophiala jeanselmei</i> in Indoor Air of Air-Conditioned Offices.

Libert Xavier X Chasseur Camille C Packeu Ann A Bureau Fabrice F Roosens Nancy H NH De Keersmaecker Sigrid C J SCJ

Microorganisms 20191210 12

Today, indoor air pollution is considered a public health issue. Among the impacting pollutants, indoor airborne fungi are increasingly highlighted. Most of the monitoring protocols are culture-based, but these are unable to detect the uncultivable and/or dead fraction or species suppressed by fast-growing fungi, even though this fraction could impact health. Among the contaminants suspected to be part of this fraction, <i>Exophiala jeanselmei</i> is an interesting case study. Known to be pathog ...[more]

PMID: 31835614

Similar Datasets

Project description:It is now well established that biological pollution is a major cause of the degradation of indoor air quality. It has been shown that microbial communities from the outdoors may significantly impact the communities detected indoors. One can reasonably assume that the fungal contamination of the surfaces of building materials and their release into indoor air may also significantly impact indoor air quality. Fungi are well known as common contaminants of the indoor environment with the ability to grow on many types of building materials and to subsequently release biological particles into the indoor air. The aerosolization of allergenic compounds or mycotoxins borne by fungal particles or vehiculated by dust may have a direct impact on the occupant's health. However, to date, very few studies have investigated such an impact. The present paper reviewed the available data on indoor fungal contamination in different types of buildings with the aim of highlighting the direct connections between the growth on indoor building materials and the degradation of indoor air quality through the aerosolization of mycotoxins. Some studies showed that average airborne fungal spore concentrations were higher in buildings where mould was a contaminant than in normal buildings and that there was a strong association between fungal contamination and health problems for occupants. In addition, the most frequent fungal species on surfaces are also those most commonly identified in indoor air, regardless the geographical location in Europe or the USA. Some fungal species contaminating the indoors may be dangerous for human health as they produce mycotoxins. These contaminants, when aerosolized with fungal particles, can be inhaled and may endanger human health. However, it appears that more work is needed to characterize the direct impact of surface contamination on the airborne fungal particle concentration. In addition, fungal species growing in buildings and their known mycotoxins are different from those contaminating foods. This is why further in situ studies to identify fungal contaminants at the species level and to quantify their average concentration on both surfaces and in the air are needed to be better predict health risks due to mycotoxin aerosolization.

Project description:Environmental microbes have been associated with both protective and adverse health effects in children and adults. Epidemiological studies often rely on broad biomarkers of microbial exposure (i.e. endotoxin, 1 → 3-beta-d-glucan), but fail to identify the taxonomic composition of the microbial community. Our aim was to characterize the bacterial and fungal microbiome in different types of environmental samples collected in studies of human health effects. We determined the composition of microbial communities present in home, school and outdoor air samples by amplifying and sequencing regions of rRNA genes from bacteria (16S) and fungi (18S and ITS). Samples for this pilot study included indoor settled dust (from both a Boston area birth cohort study on Home Allergens and Asthma (HAA) (n = 12) and a study of school exposures and asthma symptoms (SICAS) (n = 1)), as well as fine and coarse concentrated outdoor ambient particulate (CAP) samples (n = 9). Sequencing of amplified 16S, 18S, and ITS regions was performed on the Roche-454 Life Sciences Titanium pyrosequencing platform. Indoor dust samples were dominated by Gram-positive bacteria (Firmicutes and Actinobacteria); the most abundant bacterial genera were those related to human flora (Streptococcus, Staphylococcus, Corynebacterium and Lactobacillus). Outdoor CAPs were dominated by Gram-negative Proteobacteria from water and soil sources, in particular the genera Acidovorax, and Brevundimonas (which were present at very low levels or entirely absent in indoor dust). Phylum-level fungal distributions identified by 18S or ITS regions showed very similar findings: a predominance of Ascomycota in indoor dust and Basidiomycota in outdoor CAPs. ITS sequencing of fungal genera in indoor dust showed significant proportions of Aureobasidium and Leptosphaerulina along with some contribution from Cryptococcus, Epicoccum, Aspergillus and the human commensal Malassezia. ITS sequencing detected more than 70 fungal genera in indoor dust not observed by culture. Microbiome sequencing is feasible for different types of archived environmental samples (indoor dust, and low biomass air particulate samples), and offers the potential to study how whole communities of microbes (including unculturable taxa) influence human health.

Dataset Information

Exploiting the Advantages of Molecular Tools for the Monitoring of Fungal Indoor Air Contamination: First Detection of Exophiala jeanselmei in Indoor Air of Air-Conditioned Offices.

Publications

Exploiting the Advantages of Molecular Tools for the Monitoring of Fungal Indoor Air Contamination: First Detection of <i>Exophiala jeanselmei</i> in Indoor Air of Air-Conditioned Offices.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets