Synthesis and characterization of phenylboronic acid-containing polymer for glucose-triggered drug delivery.
Ontology highlight
ABSTRACT:
SUBMITTER: Cui G
PROVIDER: S-EPMC6968588 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Hydrogel optical fibers are utilized for continuous glucose sensing in real time. The hydrogel fibers consist of poly(acrylamide-co-poly(ethylene glycol) diacrylate) cores functionalized with phenylboronic acid. The complexation of the phenylboronic acid and cis-diol groups of glucose enables reversible changes of the hydrogel fiber diameter. The analyses of light propagation loss allow for quantitative glucose measurements within the physiological range.
| S-EPMC5921932 | biostudies-literature
Project description:We report the synthesis of novel acid-responsive therapeutic nanoparticles (NPs) with sub-100 nm size consisting of polymer--cisplatin conjugates. The uniqueness of these drug delivery polymeric NPs lies in the covalent conjugation of each cisplatin drug to the hydrophobic segment of two biocompatible diblock copolymer chains through a hydrazone bond, resulting in highly differential drug release profile at different environmental acidity. We demonstrate that the synthesized polymer--cisplatin conjugates can readily precipitate to form sub-100 nm NPs in aqueous solution due to their very low critical micelle concentration (CMC). The resulting NPs show well-controlled cisplatin loading yield, excellent acid-responsive drug release kinetics, and enhanced in vitro cytotoxicity against ovarian cancer cells as compared to free cisplatin. As an environmentally sensitive drug delivery vehicle, these NPs can potentially minimize the drug loss during NP circulation in the blood, where the pH value is neutral, and trigger rapid intracellular drug release after the NPs are endocytosed by the target cells. This characteristic drug release profile holds the promise to suppress cancer cell chemoresistance by rapidly releasing a high dose of chemotherapy drugs inside the tumor cells, thereby improving the therapeutic efficacy of the drug payload.
| S-EPMC2830398 | biostudies-literature
Project description:Stable and monodisperse phenylboronic acid-functionalized nanoparticles (PBA-NPs) were fabricated using 3-((acrylamido)methyl)phenylboronic acid homopolymer (PBAH) via solvent displacement technique. The effect of operating parameters, including stirring time, initial polymer concentration and the proportion of methanol on the self-assembly process were systematically investigated. The diameters of the PBA-NPs were increased as increasing the initial PBAH concentration and the proportion of methanol. Likewise, there was a linear dependence between the size of self-assembled nanoparticles and the polymer concentration. Moreover, the dissipative particle dynamics (DPD) simulation technique was used to investigate the mechanism of self-assembly behavior of PBAH, which indicated that the interior of PBA-NPs was hydrophobic and compact, and the boronic acid groups were displayed on both the outermost and interior of PBA-NPs. The resulting PBA-NPs could successfully encapsulate emodin through PBA-diol interaction and the encapsulation efficiency (EE%) and drug loading content (DLC%) of drug-loaded PBA-NPs were 78% and 2.1%, respectively. Owing to the acid-labile feature of the boronate linkage, a reduction in environmental pH from pH 7.4 to 5.0 could trigger the disassociation of the boronate ester bonds, which could accelerate the drug release from PBA-Emodin-NPs. Besides, PBA-Emodin-NPs showed a much higher cytotoxicity to HepG2 cells (cancer cells) than that to MC-3T3-E1 cells (normal cells). These results imply that PBA-NPs would be a promising scaffold for the delivery of polyphenolic drugs.
| S-EPMC4423828 | biostudies-literature
Project description:Phenylboronic acids have emerged as synthetic receptors that can reversibly bind to cis-diols of glucose molecules. The incorporation of phenylboronic acids in hydrogels offers exclusive attributes; for example, the binding process with glucose induces Donnan osmotic pressure resulting in volumetric changes in the matrix. However, their practical applications are hindered because of complex readout approaches and their time-consuming fabrication processes. Here, we demonstrate a microimprinting method to fabricate densely packed concavities in phenylboronic acid functionalized hydrogel films. A microengineered optical diffuser structure was imprinted on a phenylboronic acid based cis-diol recognizing motif prepositioned in a hydrogel film. The diffuser structure engineered on the hydrogel was based on laser-inscribed arrays of imperfect microlenses that focused the incoming light at different focal lengths and direction resulting in a diffused profile of light in transmission and reflection readout modes. The signature of the dimensional modulation was detected in terms of changing focal lengths of the microlenses due to the volumetric expansion of the hydrogel that altered the diffusion spectra and transmitted beam profile. The transmitted optical light spread and intensity through the sensor was measured to determine variation in glucose concentrations at physiological conditions. The sensor was integrated in a contact lens and placed over an artificial eye. Artificial stimulation of variation in glucose concentration allowed quantitative measurements using a smartphone's photodiode. A smartphone app was utilized to convert the received light intensity to quantitative glucose concentration values. The developed sensing platform offers low cost, rapid fabrication, and easy detection scheme as compared to other optical sensing counterparts. The presented detection scheme may have applications in wearable real-time biomarker monitoring devices at point-of-care settings.
| S-EPMC5916466 | biostudies-literature
Project description:The use of disulphide polymers, a low redox potential responsive delivery, is one strategy for targeting drugs to the colon so that they are specifically released there. The objective of this study was to synthesise a new cross-linked disulphide-containing polymer based on the amino acid cysteine as a colon drug delivery system and to evaluate the efficiency of the polymers for colon targeted drug delivery under the condition of a low redox potential. The disulphide cross-linked polymers were synthesised via air oxidation of 1,2-ethanedithiol and 3-mercapto-N-2-(3-mercaptopropionamide)-3-mercapto propionic anhydride (trithiol monomers) using different ratio combinations. Four types of polymers were synthesised: P10, P11, P151, and P15. All compounds synthesised were characterised by NMR, IR, LC-MS, CHNS analysis, Raman spectrometry, SEM-EDX, and elemental mapping. The synthesised polymers were evaluated in chemical reduction studies that were performed in zinc/acetic acid solution. The suitability of each polymer for use in colon-targeted drug delivery was investigated in vitro using simulated conditions. Chemical reduction studies showed that all polymers were reduced after 0.5-1.0 h, but different polymers had different thiol concentrations. The bacterial degradation studies showed that the polymers were biodegraded in the anaerobic colonic bacterial medium. Degradation was most pronounced for polymer P15. This result complements the general consensus that biodegradability depends on the swellability of polymers in an aqueous environment. Overall, these results suggest that the cross-linked disulphide-containing polymers described herein could be used as coatings for drugs delivered to the colon.
| S-EPMC3876135 | biostudies-literature
Project description:The aim of this study was to synthesize and characterize fatty acid-grafted-chitosan (fatty acid-g-CS) polymer and their nanomicelles for use as carriers for gene delivery. CS was hydrophobically modified using saturated fatty acids of increasing fatty acyl chain length. Carbodiimide along with N-hydroxysuccinimide was used for coupling carboxyl group of fatty acids with amine groups of CS. Proton nuclear magnetic resonance and Fourier transform infrared spectroscopy were used to quantify fatty acyl substitution onto CS backbone. The molecular weight distribution of the synthesized polymers was determined using size exclusion high performance liquid chromatography and was found to be in range of the parent CS polymer (?50 kDa). The critical micelle concentration (cmc) of the polymers was determined using pyrene as a fluorescent probe. The cmc was found to decrease with an increase in fatty acyl chain length. The amphiphilic fatty acid-g-CS polymers self-assembled in an aqueous environment to form nanomicelles of ?200 nm particle size and slightly positive net charge due to the cationic nature of free primary amino groups on CS molecule. These polymeric nanomicelles exhibited excellent hemo- and cytocompatibility, as evaluated by in vitro hemolysis and MTT cell viability assay, respectively, and showed superior transfection efficiency compared to unmodified chitosan and naked DNA. The surface of these nanomicelles can be further modified with ligands allowing for selective targeting, enhanced cell binding, and internalization. These nanomicelles can thus be exploited as potential nonviral gene delivery vectors for safe and efficient gene therapy.
| S-EPMC7002037 | biostudies-literature
Project description:In the field of nanomedicine, the global trend over the past few years has been toward the design of highly sophisticated drug delivery systems with active targeting and/or imaging capabilities, as well as responsiveness to various stimuli to increase their therapeutic efficacy. However, providing sophistication generally increases complexity that could be detrimental in regards to potential pharmaceutical development. An emerging concept to design efficient yet simple drug delivery systems, termed the "drug-initiated" method, consists of growing short polymer chains from drugs in a controlled fashion to yield well-defined drug-polymer prodrugs. These materials are obtained in a reduced amount of synthetic steps and can be self-assembled into polymer prodrug nanoparticles, be incorporated into lipid nanocarriers or be used as water-soluble polymer prodrugs. This Perspective article will capture the recent achievements from the "drug-initiated" method and highlight the great biomedical potential of these materials.
| S-EPMC4810754 | biostudies-other
Project description:An amphiphilic polymer RGD-PEG-Chol which can be produced in large scale at a very low cost has been synthesized successfully. The synthesized intermediates and final products were characterized and confirmed by ¹H nuclear magnetic resonance spectrum (¹H NMR) and Fourier transform infrared spectrum (FT-IR). The paclitaxel- (PTX-) loaded liposomes based on RGD-PEG-Chol were then prepared by film formation method. The liposomes had a size within 100 nm and significantly enhanced the cytotoxicity of paclitaxel to B16F10 cell as demonstrated by MTT test (IC₅₀ = 0.079 μg/mL of RGD-modified PTX-loaded liposomes compared to 9.57 μg/mL of free PTX). Flow cytometry analysis revealed that the cellular uptake of coumarin encapsulated in the RGD-PEG-Chol modified liposome was increased for HUVEC cells. This work provides a reasonable, facile, and economic approach to prepare peptide-modified liposome materials with controllable performances and the obtained linear RGD-modified PTX-loaded liposomes might be attractive as a drug delivery system.
| S-EPMC3918714 | biostudies-other
Project description:This study reports targetable micelles developed after covalent functionalization of α-tocopheryl polyethylene glycol succinate (TPGS) with amino phenylboronic acid (APBA). Nuclear magnetic resonance (NMR) and infrared (IR) spectroscopic results showed successful attachment of APBA to the hydrophilic segment of TPGS. Dynamic light scattering and small-angle neutron scattering studies revealed that the conjugate self-assembled in water to produce spherical core-shell micelles (14-20 nm) which remained stable against temperature (ca. 25-45 °C) and pH changes. The micelles could solubilize a high payload of paclitaxel (PLX) without exhibiting changes in the average size. However, at the saturation solubility, drug molecules migrated from the core to the shell region and engaged with APBA groups via π-π stacking interaction. Confocal microscopy and cell sorting analyses verified the effective translocation ability of TPGS-APBA micelles in sialic acid (SA) expressing MDA-MB-453 cells. At equivalent PLX dose, TPGS-APBA micelles showed about a twofold improvement in apoptotic death among the cells exposed for 2 h. Our findings indicate that the attachment of APBA can be a potential strategy for improving the intra-cellular localization of carriers among cancer cells expressing SA residues.
| S-EPMC7600591 | biostudies-literature
Project description:Since its discovery and isolation, exogenous insulin has dramatically changed the outlook for patients with diabetes. However, even when patients strictly follow an insulin regimen, serious complications can result as patients experience both hyperglycemic and hypoglycemic states. Several chemically or genetically modified insulins have been developed that tune the pharmacokinetics of insulin activity for personalized therapy. Here, we demonstrate a strategy for the chemical modification of insulin intended to promote both long-lasting and glucose-responsive activity through the incorporation of an aliphatic domain to facilitate hydrophobic interactions, as well as a phenylboronic acid for glucose sensing. These synthetic insulin derivatives enable rapid reversal of blood glucose in a diabetic mouse model following glucose challenge, with some derivatives responding to repeated glucose challenges over a 13-h period. The best-performing insulin derivative provides glucose control that is superior to native insulin, with responsiveness to glucose challenge improved over a clinically used long-acting insulin derivative. Moreover, continuous glucose monitoring reveals responsiveness matching that of a healthy pancreas. This synthetic approach to insulin modification could afford both long-term and glucose-mediated insulin activity, thereby reducing the number of administrations and improving the fidelity of glycemic control for insulin therapy. The described work is to our knowledge the first demonstration of a glucose-binding modified insulin molecule with glucose-responsive activity verified in vivo.
| S-EPMC4345600 | biostudies-literature