Browse
Submit Data
Databases
API
Help

Dataset Information

24 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Enhanced Skin Adhesive Property of Hydrophobically Modified Poly(vinyl alcohol) Films.

ABSTRACT: Hydrophobically modified poly(vinyl alcohol) (hm-PVA) films with various alkyl chain lengths were prepared. Their surface/mechanical properties, cytocompatibility, and porcine skin adhesion strength were evaluated. hm-PVAs had 10 °C higher glass transition temperature than poly(vinyl alcohol) (PVA) (33.4 ± 2.5 °C). The water contact angle of the hm-PVA films increased with alkyl chain length and/or hydrophobic group modification ratio. The tensile strength of the hm-PVA films decreased with increasing alkyl chain length and/or hydrophobic group modification ratio. hm-PVA with short chain lengths (4 mol % propanal-modified PVA; 4C3-PVA) had low cytotoxicity compared with long alkyl chain length hm-PVAs (4 mol % hexanal and nonanal-modified PVA; 4C6-PVA and 4C9-PVA). The 4C3-PVA film had the highest porcine skin adhesion strength. Thus, the 4C3-PVA film is promising as an adhesive for wearable medical devices.

SUBMITTER: Chen X

PROVIDER: S-EPMC6990645 | biostudies-literature | 2020 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Enhanced Skin Adhesive Property of Hydrophobically Modified Poly(vinyl alcohol) Films.

Chen Xi X Taguchi Tetsushi T

ACS omega 20200110 3

Hydrophobically modified poly(vinyl alcohol) (hm-PVA) films with various alkyl chain lengths were prepared. Their surface/mechanical properties, cytocompatibility, and porcine skin adhesion strength were evaluated. hm-PVAs had 10 °C higher glass transition temperature than poly(vinyl alcohol) (PVA) (33.4 ± 2.5 °C). The water contact angle of the hm-PVA films increased with alkyl chain length and/or hydrophobic group modification ratio. The tensile strength of the hm-PVA films decreased with incr ...[more]

PMID: 32010825

Similar Datasets

Layer-by-layer films of polysaccharides modified with poly(N-vinylpyrrolidone) and poly(vinyl alcohol).

Project description:N-grafted copolymers of chitosan (460 kDa) with poly(N-vinylpyrrolidone) (2.4 kDa) or poly(vinyl alcohol) (2.0 kDa) as side chains were synthesized. Depending on the polymer-to-chitosan mass ratio the degree of amino group substitution with side chains in chitosan backbone was varied in the range of 0.01-0.33. Layer-by-layer films consisted of copolymers and dextran sulfate as polyanion were obtained. Thickness, hydrophilicity, and morphology of the films were investigated using QCM, UV-vis spectrophotometry, AFM, and contact angle measurements. The obtained films show enhanced protein-repellent properties in fetal bovine serum medium. The mass of adsorbed proteins on LbL films based on copolymer with a degree of substitution of 0.2 decreases by 50 % compared to unmodified chitosan. Protein-repellent properties of copolymer-based films are common for LbL films of grafted chitosan copolymers and depend on hydrophilic side chain density on the surface.

| S-EPMC8555284 | biostudies-literature

Injectable dopamine-modified poly(ethylene glycol) nanocomposite hydrogel with enhanced adhesive property and bioactivity.

Project description:A synthetic mimic of mussel adhesive protein, dopamine-modified four-armed poly(ethylene glycol) (PEG-D4), was combined with a synthetic nanosilicate, Laponite (Na(0.7+)(Mg5.5Li0.3Si8)O20(OH)4)(0.7-)), to form an injectable naoncomposite tissue adhesive hydrogel. Incorporation of up to 2 wt % Laponite significantly reduced the cure time while enhancing the bulk mechanical and adhesive properties of the adhesive due to strong interfacial binding between dopamine and Laponite. The addition of Laponite did not alter the degradation rate and cytocompatibility of PEG-D4 adhesive. On the basis of subcutaneous implantation in rat, PEG-D4 nanocomposite hydrogels elicited minimal inflammatory response and exhibited an enhanced level of cellular infiltration as compared to Laponite-free samples. The addition of Laponite is potentially a simple and effective method for promoting bioactivity in a bioinert, synthetic PEG-based adhesive while simultaneously enhancing its mechanical and adhesive properties.

| S-EPMC4189622 | biostudies-literature

Water absorption dependence of the formation of poly(vinyl alcohol)-iodine complexes for poly(vinyl alcohol) films.

Project description:Poly(vinyl alcohol) (PVA) films annealed at different temperatures are used to explore the effects of the water absorption on the formation of PVA-iodine complexes. It's found that the higher the annealing temperature, the stronger the interaction force between PVA segments, and the smaller the free volume of the PVA films. These mainly lead to the reduction of the amount of PVA segments with a moderate degree of hydration (i.e., PVA segments with moderate mobility), which are the major segments participating in the formation of PVA-iodine complexes. Therefore, PVA films with higher water absorption not only possess faster complexation speed and form more PVA-iodine complexes, but also increase the proportion of polyiodide ions with a longer length. Moreover, the complexation restricts the PVA segments with high mobility, resulting in the formation of the intermolecular ordered structure. The water absorption dependence may guide the dyeing process to obtain PVA polarizers with excellent optical performance.

| S-EPMC9038136 | biostudies-literature

Design and fabrication of modified bi-layer poly vinyl alcohol adhesive sealant film for preventing gastrointestinal leakage.

Project description:Anastomosis leakage is a common complication in gastrointestinal surgery associated with high mortality, morbidity, and cost to health care providers. According to the significant burdens of AL, several methods have been introduced to overcome this problem. Despite the crucial complications of the AL, current approaches, including glue-based adhesives and bio-based sealants, have certain disadvantages and newly gained attractions for solving this challenge. This study focused on fabricating a sealant structure based on poly (vinyl alcohol) film patterned with gelatin particles and evaluating for prevention of AL. Here, we used a 3D printed model for dry spraying gelatin particles in a random and oriented pattern on PVA films. The mechanical and adhesion properties of both types of films were assessed further, and the efficacy of the novel sealant was evaluated in vivo. The results revealed that the film with an oriented pattern provided better adhesive and mechanical properties, expression of anti-inflammatory cytokines, and collagen deposition. In conclusion, our novel sealant enhanced mechanical features and the healing process of gastrointestinal surgical anastomosis and can be considered a novel method for the prevention of AL.

| S-EPMC9744773 | biostudies-literature

Design and Characterization of Sodium Alginate and Poly(vinyl) Alcohol Hydrogels for Enhanced Skin Delivery of Quercetin.

Project description:Nature has led to the discovery of biopolymers with noteworthy pharmaceutical applications. Blended biopolymers have demonstrated promising characteristics when compared with their individual counterparts. Sodium alginate (SA) is a marine polymer that has demonstrated the ability to form hydrogels, an interesting property for the development of cutaneous formulations. Predicting the good performance of blended biopolymers, a novel series of hybrid hydrogels based on SA and poly(vinyl) alcohol (PVA) were prepared. Quercetin, a natural polyphenolic flavonoid commonly found in fruits and vegetables, is widely known for its strong anti-inflammatory and antioxidant activity, thus with potential applications against melanoma, dermatitis, psoriasis, and skin ageing. Here, hydrogels were produced at different ratios of SA and PVA. The surface morphology, structure, interaction of polymers, the capacity to absorb water and the entrapment efficiency of quercetin were evaluated for the blended hydrogels. Targeting the cutaneous application of the formulations, the rheological properties of all unloaded and quercetin-loaded hydrogels revealed pseudoplastic behavior, evidence of non-thixotropy, good resistance to deformation, and profile maintenance with temperatures ranging from 20 °C up to 40 °C. The incorporation of quercetin in the hydrogel retained its antioxidant activity, confirmed by radical scavenging assays (ABTS and DPPH). The permeability of quercetin through the skin showed different penetration/permeation profiles according to the hydrogel's blend. This behavior will allow the selection of SA-PVA at 2/1 ratio for a local and prolonged skin effect, making the use of these hydrogels a good solution to consider for the treatment of skin ageing and inflammation.

| S-EPMC7760628 | biostudies-literature

Preparation of cyanobacteria-enhanced poly(vinyl)alcohol-based films with resistance to blue-violet light / red light and water.

Project description:The harmful cyanobacteria blooms which usually form in spring and summer, cause global eutrophication of freshwater and coastal marine ecosystems. This study tried to utilize cyanobacteria as a raw material to produce biological poly(vinyl)alcohol-based films. Cyanobacteria was firstly modified with poly(ethylene glycol), guanidine hydrochloride, carboxymethyl cellulose and 3-glycidoxypropyltrimethoxysilane as plasticizer, modifier, toughening agent and coupling agent, respectively. And then the modified cyanobacteria was introduced to poly(vinyl)alcohol and cellulose nanofibers/poly(vinyl)alcohol matrix to improve the barrier properties of poly(vinyl)alcohol to light and water. Compared with poly(vinyl)alcohol and cellulose nanofibers/poly(vinyl)alcohol films, the obtained cyanobacteria/poly(vinyl)alcohol and the cyanobacteria/cellulose nanofibers/poly(vinyl)alcohol composites exhibit better resistance to light and water. More interestingly, we found that after adding cyanobacteria, the poly(vinyl)alcohol-based films present better barrier properties to blue-violet light and red light. In adddition, introducing cyanobacteria into poly(vinyl)alcohol or cellulose nanofibers/poly(vinyl)alcohol matrix increases the surface roughness and contact angle to water of the composites.

| S-EPMC7018049 | biostudies-literature

Fabrication and Characterization of Poly (vinyl alcohol) and Chitosan Oligosaccharide-Based Blend Films.

Project description:In the present study, we report the development of poly (vinyl alcohol) (PVA) and chitosan oligosaccharide (COS)-based novel blend films. The concentration of COS was varied between 2.5-10.0 wt% within the films. The inclusion of COS added a brown hue to the films. FTIR spectroscopy revealed that the extent of intermolecular hydrogen bonding was most prominent in the film that contained 5.0 wt% of COS. The diffractograms showed that COS altered the degree of crystallinity of the films in a composition-dependent manner. As evident from the thermal analysis, COS content profoundly impacted the evaporation of water molecules from the composite films. Stress relaxation studies demonstrated that the blend films exhibited more mechanical stability as compared to the control film. The impedance profiles indicated the capacitive-dominant behavior of the prepared films. Ciprofloxacin HCl-loaded films showed excellent antimicrobial activity against Escherichia coli and Bacillus cereus. The prepared films were observed to be biocompatible. Hence, the prepared PVA/COS-based blend films may be explored for drug delivery applications.

| S-EPMC8162339 | biostudies-literature

Gelatin Microgel Incorporated Poly(ethylene glycol)-Based Bioadhesive with Enhanced Adhesive Property and Bioactivity.

Project description:Up to 7.5 wt % of chemically cross-linked gelatin microgel was incorporated into dopamine-modified poly(ethylene glycol) (PEGDM) adhesive to simultaneously improve the material property and bioactivity of the PEG-based bioadhesive. Incorporation of gelatin microgel reduced cure time while it increased the elastic modulus and cross-linking density of the adhesive network. Most notably, the loss modulus values for microgel-containing adhesive were an order of magnitude higher when compared to microgel-free control. This drastic increase in the viscous dissipation ability of the adhesive is attributed to the introduction of reversible physical bonds into the adhesive network with the incorporation of the gelatin microgel. Additionally, incorporation of the microgel increased the adhesive properties of PEGDM by 1.5- to 2-fold. From in vitro cell culture studies, the composite adhesive is noncytotoxic and the incorporation of microgels provided binding site for promoting fibroblast attachment and viability. The subcutaneous implantation study indicated that the microgel-containing PEGDM adhesive is biocompatible and the incorporated microgels provided pockets for rapid cellular infiltration. Gelatin microgel incorporation was demonstrated to be a facile method to simultaneously enhance the adhesive property and the bioactivity of PEG-based adhesive.

| S-EPMC4874333 | biostudies-literature

Fabrication of photothermally active poly(vinyl alcohol) films with gold nanostars for antibacterial applications.

Project description:The unique photothermal properties of non-spherical gold nanoparticles under near-infrared (NIR) irradiation find broad application in nanotechnology and nanomedicine. The combination of their plasmonic features with widely used biocompatible poly(vinyl alcohol) (PVA) films can lead to novel hybrid polymeric materials with tunable photothermal properties and a wide range of applications. In this study, thin PVA films containing highly photothermally efficient gold nanostars (GNSs) were fabricated and their properties were studied. The resulting films displayed good mechanical properties and a pronounced photothermal effect under NIR irradiation. The local photothermal effect triggered by NIR irradiation of the PVA-GNS films is highly efficient at killing bacteria, therefore providing an opportunity to develop new types of protective antibacterial films and coatings.

| S-EPMC6071708 | biostudies-literature

Facile and Novel Eco-Friendly Poly(Vinyl Alcohol) Nanofilters Using the Photocatalytic Property of Titanium Dioxide.

Project description:This study aimed to develop a highly efficient nanofilter for capturing fine particles using electrostatic forces. Poly(vinyl alcohol) (PVA), a water-soluble synthetic polymer, was selected as the main component of the filter because it can be easily fabricated by electrospinning. Titanium dioxide (TiO2) nanopowder with an anatase structure was applied to the nanofilters as it has the highest photocatalytic activity among the existing photocatalysts. PVA nanofilters fabricated by electrospinning could still be dissolved in water by hydrolysis. Therefore, heat treatment was performed to make the nanofilters stable, thereby forming C=O bonds by keto-enol tautomerization. Structural changes in the PVA nanofilter before and after heat treatment were investigated by X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) analysis. As the TiO2 concentration increased, the fiber diameter of the PVA nanofilter decreased and a homogeneous fiber was obtained. The filtration efficiency and pressure drop also improved significantly, compared to those of the PVA-only nanofilter. Moreover, we observed eco-friendly decomposition of the PVA/TiO2 nanofilter into water and carbon dioxide by a photocatalytic reaction under UV irradiation.

| S-EPMC7081405 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data