Dataset Information

Risk factors influencing contamination of customized cosmetics made on-the-spot: Evidence from the national pilot project for public health.

ABSTRACT: Customized cosmetics made by consumers or sellers on-the-spot have several safety issues, and therefore require a preventative approach to their safety management. The present study aimed to identify potential factors affecting the safety of customized cosmetics made on-the-spot. Heavy metals and microbial contaminants in customized cosmetics were analyzed in 120 samples. It was revealed that the transfer of cosmetics to new containers during the production process is a significant risk factor for cross-contamination and that heat treatment is crucial for reducing the number of microorganisms in the products. For instance, cosmetics made with heat and with no transfer showed relatively low microbial counts ranging from not detected to 440 CFU/ml. The high pH (>pH 10) of samples did not guarantee the microbial safety of the freshly made cosmetics (with a rinse-off product having 2,830 CFU/ml and a pH of 11.2). There was no significant difference in microbial counts among cosmetic types (P?>?0.05); however, semisolid types, especially creams and rinse-off products, were susceptible to contamination (maximum 2,710 and 2,830 CFU/ml, respectively). Most microorganisms in the customized cosmetics (40.8%) decreased to non-detectable levels during 60 days of storage. None of the samples harbored heavy metals. Sequencing analysis of isolates revealed some bacteria and mold that could cause human infections. The results of this study suggest that the regulation of customized cosmetics should consider the risk factors revealed in this study, as the products made on-the-spot are also final products sent directly to consumers.

SUBMITTER: Kim HW

PROVIDER: S-EPMC6994525 | biostudies-literature | 2020 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Risk factors influencing contamination of customized cosmetics made on-the-spot: Evidence from the national pilot project for public health.

Kim Hye Won HW Seok Yae Sle YS Cho Tae Jin TJ Rhee Min Suk MS

Scientific reports 20200131 1

Customized cosmetics made by consumers or sellers on-the-spot have several safety issues, and therefore require a preventative approach to their safety management. The present study aimed to identify potential factors affecting the safety of customized cosmetics made on-the-spot. Heavy metals and microbial contaminants in customized cosmetics were analyzed in 120 samples. It was revealed that the transfer of cosmetics to new containers during the production process is a significant risk factor f ...[more]

PMID: 32005845

Similar Datasets

Project description:Legionnaires' disease is a potentially fatal pneumonia like infection caused by inhalation or aspiration of water particles contaminated with pathogenic Legionella spp. Household showers have been identified as a potential source of sporadic, community-acquired Legionnaires' disease. This study used qPCR to enumerate Legionella spp. and Legionella pneumophila in water samples collected from domestic showers across metropolitan Adelaide, South Australia. A survey was used to identify risk factors associated with contamination and to examine awareness of Legionella control in the home. The hot water temperature was also measured. A total of 74.6% (50/68) and 64.2% (43/68) showers were positive for Legionella spp. and L. pneumophila, respectively. Statistically significant associations were found between Legionella spp. concentration and maximum hot water temperature (p = 0.000), frequency of shower use (p = 0.000) and age of house (p = 0.037). Lower Legionella spp. concentrations were associated with higher hot water temperatures, showers used at least every week and houses less than 5 years old. However, examination of risk factors associated with L. pneumophila found that there were no statistically significant associations (p > 0.05) with L. pneumophila concentrations and temperature, type of hot water system, age of system, age of house or frequency of use. This study demonstrated that domestic showers were frequently colonized by Legionella spp. and L. pneumophila and should be considered a potential source of sporadic Legionnaires' disease. Increasing hot water temperature and running showers every week to enable water sitting in pipes to be replenished by the municipal water supply were identified as strategies to reduce the risk of Legionella in showers. The lack of public awareness in this study identified the need for public health campaigns to inform vulnerable populations of the steps they can take to reduce the risk of Legionella contamination and exposure.

Dataset Information

Risk factors influencing contamination of customized cosmetics made on-the-spot: Evidence from the national pilot project for public health.

Publications

Risk factors influencing contamination of customized cosmetics made on-the-spot: Evidence from the national pilot project for public health.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets