Techno-economic assessment of microbial limonene production.
Ontology highlight
ABSTRACT:
SUBMITTER: Sun C
PROVIDER: S-EPMC7001033 | biostudies-literature | 2020 Mar
REPOSITORIES: biostudies-literature
Publications
Techno-economic assessment of microbial limonene production.
Sun Chenhao C Theodoropoulos Constantinos C Scrutton Nigel S NS
Bioresource technology 20191223
To satisfy the growing demand for limonene, novel pathways for microbial production of limonene have been sought. A techno-economic analysis is carried out for one such process producing limonene from sugar at an industrial plant scale to assess potential economic viability. A conceptual design of the process is developed, in which a gas stripping-solvent scrubbing method is chosen for recovering limonene from bioreactors based on consideration of payback time and process operability. Minimum li ...[more]
Similar Datasets
Project description:BackgroundRecent advances in metabolic engineering enable the production of chemicals from sugars through microbial bio-conversion. Terpenes have attracted substantial attention due to their relatively high prices and wide applications in different industries. To this end, we synthesize and assess processes for microbial production of terpenes.ResultsTo explain a counterintuitive experimental phenomenon where terpenes such as limonene (normal boiling point 176 °C) are often found to be 100% present in the vapor phase after bio-conversion (operating at only ~ 30 °C), we first analyze the vapor-liquid equilibrium for systems containing terpenes. Then, we propose alternative production configurations, which are further studied, using limonene as an example, in several case studies. Next, we perform economic assessment of the alternative processes and identify the major cost components. Finally, we extend the assessment to account for different process parameters, terpene products, ways to address terpene toxicity (microbial engineering vs. solvent use), and cellulosic biomass as a feedstock. We identify the key cost drivers to be (1) feed glucose concentration (wt%), (2) product yield (% of maximum theoretical yield) and (3) VVM (Volume of air per Volume of broth liquid per Minute, i.e., aeration rate in min-1). The production of limonene, based on current experimental data, is found to be economically infeasible (production cost ~ 465 $/kg vs. market selling price ~ 7 $/kg), but higher glucose concentration and yield can lower the cost. Among 12 terpenes studied, limonene appears to be the most reasonable short-term target because of its large market size (~ 160 million $/year in the US) and the relatively easier to achieve break-even yield (~ 30%, assuming a 14 wt% feed glucose concentration and 0.1 min-1 VVM).ConclusionsThe methods proposed in this work are applicable to a range of terpenes as well as other extracellular insoluble chemicals with density lower than that of water, such as fatty acids. The results provide guidance for future research in metabolic engineering toward terpenes production in terms of setting targets for key design parameters.
| S-EPMC6203976 | biostudies-literature
Project description:Bio-based plastics, produced from natural and renewable sources, have been found to be good replacers to petroleum-based plastics. However, economic analyses have not been carried out for most of them, specifically those from whey. In this study, a techno-economic assessment of the industrial-scale production of plastics from whey protein is carried out considering two different scenarios: (1) low-cost dairy waste whey (DWP) and (2) purchased whey protein concentrate (WPC), as feedstocks, using SuperPro Designer software. Key economic indicators such as operating cost, capital investment, annual revenue, payback time, and return-on-investment (ROI), were analyzed. Sensitivity analyses of different parameters were performed to account for market fluctuations and other uncertainties, using Scenario 2 as the base case. Results showed that both scenarios have the capacity of producing over 3200 metric tons/year (t/yr) (or 5.5 t/batch) of plastic. With the unit selling price of plastic set at $7,000/t, both the scenarios showed profitable outcomes with the plant's payback time of 3.7 and 2.4 years, and ROI of 27.1% and 42.2%, for Scenario 1 and Scenario 2, respectively. Sensitivity analyses showed that the unit plastic selling price was the most sensitive parameter, followed by the amount of feedstock WPC, and the number of batches.
| S-EPMC7240497 | biostudies-literature
Project description:BackgroundAlcohol-to-jet (ATJ) is one of the technical feasible biofuel technologies. It produces jet fuel from sugary, starchy, and lignocellulosic biomass, such as sugarcane, corn grain, and switchgrass, via fermentation of sugars to ethanol or other alcohols. This study assesses the ATJ biofuel production pathway for these three biomass feedstocks, and advances existing techno-economic analyses of biofuels in three ways. First, we incorporate technical uncertainty for all by-products and co-products though statistical linkages between conversion efficiencies and input and output levels. Second, future price uncertainty is based on case-by-case time-series estimation, and a local sensitivity analysis is conducted with respect to each uncertain variable. Third, breakeven price distributions are developed to communicate the inherent uncertainty in breakeven price. This research also considers uncertainties in utility input requirements, fuel and by-product outputs, as well as price uncertainties for all major inputs, products, and co-products. All analyses are done from the perspective of a private firm.ResultsThe stochastic dominance results of net present values (NPV) and breakeven price distributions show that sugarcane is the lowest cost feedstock over the entire range of uncertainty with the least risks, followed by corn grain and switchgrass, with the mean breakeven jet fuel prices being $0.96/L ($3.65/gal), $1.01/L ($3.84/gal), and $1.38/L ($5.21/gal), respectively. The variation of revenues from by-products in corn grain pathway can significantly impact its profitability. Sensitivity analyses show that technical uncertainty significantly impacts breakeven price and NPV distributions.ConclusionsTechnical uncertainty is critical in determining the economic performance of the ATJ fuel pathway. Technical uncertainty needs to be considered in future economic analyses. The variation of revenues from by-products plays a significant role in profitability. With the distribution of breakeven prices, potential investors can apply whatever risk preferences they like to determine an appropriate bid or breakeven price that matches their risk profile.
| S-EPMC5244559 | biostudies-literature
Project description:The purpose of this research is to demonstrate through a techno-economic assessment that aniline can be industrially produced using a profitable and inherently safer process than the ones currently employed. The aniline production process was designed using process simulation software. From this, the mass and energy balances were determined, the equipment sizing was performed and the net present value (NPV) was calculated to be USD 93.5 million. Additionally, a heat integration analysis was carried out in order to improve process profitability, obtaining a new NPV of USD 97.5 million. The economic sensitivity analysis showed that the process could withstand fixed capital investment changes of up to +89%, weighted average cost of capital changes between 16-24% and a decrease in cyclohexylamine demand of up to 44%. The conceptual design is still profitable when aniline price is varied in a range of 1224-1840 $/t and phenol cost in a range of 815-1178 $/t.
| S-EPMC7772548 | biostudies-literature
Project description:Recycling of waste CO2 to bulk chemicals has a tremendous potential for the decarbonization of the chemical industry. Quantitative analysis of the prospects of this technology is hindered by the lack of flexible techno-economic assessment (TEA) models that enable evaluation of the processing costs under different deployment scenarios. In this protocol, we explain how to convert literature data into metrics useful for evaluation of the emerging electrolysis technologies, derive TEA models, and illustrate their use with a CO2-to-ethylene example. For complete details on the use and execution of this protocol, please refer to Barecka et al. (2021a).
| S-EPMC8536783 | biostudies-literature
Project description:BackgroundMicroalgae possess numerous advantages for use as a feedstock in producing renewable fuels and products, with techno-economic analysis (TEA) frequently used to highlight the economic potential and technical challenges of utilizing this biomass in a biorefinery context. However, many historical TEA studies have focused on the conversion of biomass with elevated levels of carbohydrates and lipids and lower levels of protein, incurring substantial burdens on the ability to achieve high cultivation productivity rates relative to nutrient-replete, high-protein biomass. Given a strong dependence of algal biomass production costs on cultivation productivity, further TEA assessment is needed to understand the economic potential for utilizing potentially lower-cost but lower-quality, high-protein microalgae for biorefinery conversion.ResultsIn this work, we conduct rigorous TEA modeling to assess the economic viability of two conceptual technology pathways for processing proteinaceous algae into a suite of fuels and products. One approach, termed mild oxidative treatment and upgrading (MOTU), makes use of a series of thermo-catalytic operations to upgrade solubilized proteins and carbohydrates to hydrocarbon fuels, while another alternative focuses on the biological conversion of those substrates to oxygenated fuels in the form of mixed alcohols (MA). Both pathways rely on the production of polyurethanes from unsaturated fatty acids and valorization of unconverted solids for use as a material for synthesizing bioplastics. The assessment found similar, albeit slightly higher fuel yields and lower costs for the MA pathway, translating to a residual solids selling price of $899/ton for MA versus $1033/ton for MOTU as would be required to support a $2.50/gallon gasoline equivalent (GGE) fuel selling price. A variation of the MA pathway including subsequent upgrading of the mixed alcohols to hydrocarbon fuels (MAU) reflected a required solids selling price of $975/ton.ConclusionThe slight advantages observed for the MA pathway are partially attributed to a boundary that stops at oxygenated fuels versus fungible drop-in hydrocarbon fuels through a more complex MOTU configuration, with more comparable results obtained for the MAU scenario. In either case, it was shown that an integrated algal biorefinery can be economical through optimal strategies to utilize and valorize all fractions of the biomass.
| S-EPMC8764804 | biostudies-literature
Project description:Advanced biomanufacturing builds on production processes that are both profitable and sustainable. Integrated design of process unit operations, geared to output efficiency and waste minimization and guided by a rigorous techno-economic assessment, is essential for development aligned to these central aims. Here, we demonstrate such a development for the biocatalytic production of the biological extremolyte 2-O-α-d-glucosyl-glycerol (2-GG) for functional ingredient application. The process was aligned in scale over all steps (∼180 g product; ∼2.5 L reaction mixture) and involved continuous enzymatic synthesis from sucrose and glycerol interlinked with reactive extraction and nanofiltration for product isolation (purity of ∼80 wt %) and side stream recovery. Glycerol used in ∼6-fold excess over sucrose was recycled, and hydrothermal conversion into 5-(hydroxymethyl)furfural was evaluated for the fructose by-product released from sucrose. Based on a process mass intensity (total mass input/mass product) of 146, ∼80% of the total mass input was utilized and an E-factor (mass waste/mass product) of 28 was obtained. EcoScale analysis revealed a penalty point score of 44, suggesting an acceptable process from a sustainability point of view. Process simulation for an annual production of 10 tons 2-GG was used for the techno-economic assessment with discounted cash flow analysis. The calculated operating costs involved 35 and 47% contributions from materials and labor, respectively. About 91% of the material costs were due to chemicals for the reactive extraction-acidic stripping step, emphasizing the importance of material reuse at this step. Glycerol recycling involved a trade-off between waste reduction and energy use for the removal of water. Collectively, the study identifies options and boundaries of a profitable 2-GG process. The minimum selling price for 2-GG was calculated as ∼240 € kg-1 or smaller. The framework of the methodology presented can be generally important in applied bio-catalysis: it facilitates closing of the gap between process design and implementation for accelerated development.
| S-EPMC8790807 | biostudies-literature
Project description:BackgroundThe economic viability of hydrodeoxygenation process using Camelina, Carinata and Jatropha feedstocks for aviation biofuel production was evaluated for two product profiles: (i) maximum diesel production and (ii) maximum jet fuel production (HRJ).ResultsDeterministic analysis of Camelina and Carinata diesel facilities returned positive NPVs and IRRs of 25 and 18%, respectively. Stochastic analysis suggested that the probabilities of positive NPVs were 75, 59 and 15%, respectively, for Camelina, Carinata and Jatropha diesel plants. Jet fuel facilities presented probabilities of loss of 98, 99 and 100% for Camelina, Carinata and Jatropha scenarios, respectively. Sensitivity analysis determined that financial performance was majorly influenced by feedstock and fuel prices. Categories of subsidies to enhance the attractiveness of the projects were studied.ConclusionsCamelina, Carinata and Jatropha plants targeting HRJ required incentives of 0.31, 0.39 and 0.61 US$/L of biofuel produced, respectively, to reduce the probabilities of loss to approximately 30%.
| S-EPMC5992646 | biostudies-literature
Project description:Food waste is a major constituent in municipal solid wastes and its accumulation or disposal of in landfills is problematic, causing environmental issues. Herein, a techno-economic study is carried out on the potential of biogas production from different types of food waste generated locally. The biogas production tests were at two-time sets; 24-h and 21-day intervals and results showed a good correlation between those two-time sets. Thus, we propose to use the 24-h time set to evaluate feedstock fermentation capacity that is intended for longer periods. Our approach could potentially be applied within industry as the 24-h test can give a good indication of the potential substrate gas production as a quick test that saves time, with minimal effort required. Furthermore, polynomial models were used to predict the production of total gas and methane during the fermentation periods, which showed good matching between the theoretical and practical values with a coefficient of determination R2 = 0.99. At day 21, the accumulative gas production value from mixed food waste samples was 1550 mL per 1 g of dry matter. An economic evaluation was conducted and showed that the case study breaks-even at $0.2944 per cubic metre. Any prices above this rate yield a positive net present value (NPV); at $0.39/m3 a discounted payback period of six years and a positive NPV of $3108 were calculated. If waste management fee savings are to be incorporated, the total savings would be higher, increasing annual cash flows and enhancing financial results. This economic evaluation serves as a preliminary guide to assess the economic feasibility based on the fluctuating value of methane when producing biogas from food waste via anaerobic digestion, thus could help biogas project developers investigate similar scale scenarios .
| S-EPMC7515879 | biostudies-literature
Project description:UnlabelledBackgroundCost-effective production of lignocellulosic biofuels remains a major financial and technical challenge at the industrial scale. A critical tool in biofuels process development is the techno-economic (TE) model, which calculates biofuel production costs using a process model and an economic model. The process model solves mass and energy balances for each unit, and the economic model estimates capital and operating costs from the process model based on economic assumptions. The process model inputs include experimental data on the feedstock composition and intermediate product yields for each unit. These experimental yield data are calculated from primary measurements. Uncertainty in these primary measurements is propagated to the calculated yields, to the process model, and ultimately to the economic model. Thus, outputs of the TE model have a minimum uncertainty associated with the uncertainty in the primary measurements.ResultsWe calculate the uncertainty in the Minimum Ethanol Selling Price (MESP) estimate for lignocellulosic ethanol production via a biochemical conversion process: dilute sulfuric acid pretreatment of corn stover followed by enzymatic hydrolysis and co-fermentation of the resulting sugars to ethanol. We perform a sensitivity analysis on the TE model and identify the feedstock composition and conversion yields from three unit operations (xylose from pretreatment, glucose from enzymatic hydrolysis, and ethanol from fermentation) as the most important variables. The uncertainty in the pretreatment xylose yield arises from multiple measurements, whereas the glucose and ethanol yields from enzymatic hydrolysis and fermentation, respectively, are dominated by a single measurement: the fraction of insoluble solids (fIS) in the biomass slurries.ConclusionsWe calculate a $0.15/gal uncertainty in MESP from the TE model due to uncertainties in primary measurements. This result sets a lower bound on the error bars of the TE model predictions. This analysis highlights the primary measurements that merit further development to reduce the uncertainty associated with their use in TE models. While we develop and apply this mathematical framework to a specific biorefinery scenario here, this analysis can be readily adapted to other types of biorefining processes and provides a general framework for propagating uncertainty due to analytical measurements through a TE model.
| S-EPMC3503575 | biostudies-literature