Dataset Information

Evaluation of the Self-Healing Ability of Mortar Mixtures Containing Superabsorbent Polymers and Nanosilica.

ABSTRACT: Addition of superabsorbent polymers (SAPs) to cementitious mixtures promotes the self-healing ability of the material. When cracking occurs; SAPs present inside the crack will swell upon contact with water and subsequently release this water to stimulate the further hydration of unhydrated cement particles and the calcium carbonate crystallization. However; the inclusion of SAPs affects the mechanical performance of the cementitious material by the creation of macro-pores as water is retracted from the swollen SAP. To counteract the reduction in strength, part of the cement is replaced by nanosilica. In this research, different mixtures containing either SAPs or nanosilica and a combination of both were made. The samples were subjected to wet-dry cycles simulating external conditions, and the self-healing efficiency was evaluated by means of the evolution in crack width, by optical measurements, and a water permeability test. In samples containing SAPs, an immediate sealing effect was observed and visual crack closure was noticed. The smaller influence on the mechanical properties and the good healing characteristics in mixtures containing both nanosilica and SAPs are promising as a future material for use in building applications.

SUBMITTER: Lefever G

PROVIDER: S-EPMC7013588 | biostudies-literature | 2020 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Evaluation of the Self-Healing Ability of Mortar Mixtures Containing Superabsorbent Polymers and Nanosilica.

Lefever Gerlinde G Snoeck Didier D Aggelis Dimitrios G DG De Belie Nele N Van Vlierberghe Sandra S Van Hemelrijck Danny D

Materials (Basel, Switzerland) 20200114 2

Addition of superabsorbent polymers (SAPs) to cementitious mixtures promotes the self-healing ability of the material. When cracking occurs; SAPs present inside the crack will swell upon contact with water and subsequently release this water to stimulate the further hydration of unhydrated cement particles and the calcium carbonate crystallization. However; the inclusion of SAPs affects the mechanical performance of the cementitious material by the creation of macro-pores as water is retracted f ...[more]

PMID: 31947606

Similar Datasets

Project description:Robots operating in changing underwater environments may be required to adapt to these varying conditions. In tidal estuaries, for example, where the degree of salinity cycles in step with the level of the water, a robot may need to adapt its behaviour depending on the position of the tide. In freshwater bodies, the unexpected presence of a pollutant may also require the robot to respond by altering its behaviour. Embodying this sensing and response in the body of the robot means that adaptivity to the environment can be achieved without resorting to centralised control. This can also allow direct responsivity using 'free' environmental energy, actuating without requiring stored onboard energy. In this work we present a soft artificial muscle, the contraction of which varies in response to the salinity the water surrounding it. The novel actuator uses a super-absorbent polymer gel encapsulated within a series of discrete cells. This gel readily absorbs water through the membrane wall of the actuator, and can swell to over 300 times its initial volume. This swelling generates significant pressure, changing the shape of the cells and driving the contraction of the muscle. The degree of swelling is significantly reduced by the presence of salts and pollutants in the surrounding water, so transitioning from a freshwater to a saltwater environment causes the muscle to relax. In this paper, we discuss the design and fabrication of these superabsorbent polymer-based Bubble Artificial Muscle (SAP-BAM) actuators. The tensile properties of the muscle under actuated (fresh water) and relaxed (salt water) conditions are characterised, showing a maximum generated force of 10.96N. The length response under constant load for a full actuation cycle is given, showing a maximum contraction of 27.5% of the initial length at 1N load, and the performance over repeated actuation and relaxation cycles is shown. The SAP-BAM muscles are straightforward to fabricate and are composed of low-cost, freely-available materials. Many existing pneumatically-actuated muscles can be modified to use the approach taken for this muscle. The muscle presented in this work represents the first example of a new class of super-absorbent polymer-driven environmental soft artificial muscles.

Project description:Concrete can be harmful to the environment due to its high energy consumption and CO2 emission and also has a potential crack formation, which can promote a drop in its strength. Therefore, concrete is considered as a non-sustainable material. The mechanisms by which bacterial oxidation of organic carbon can precipitate calcite that may fill the voids and cracks on cement-based materials have been extensively investigated to prevent and heal the micro-cracks formation. Hence, this study focused on utilizing a new alkaliphilic bacterial strain indigenous to an Indonesian site, Lysinibacillus sphaericus strain SKC/VA-1, incorporated with calcium lactate pentahydrate, as a low-cost calcium source, with various bacterial inoculum concentrations. The bacterium was employed in this study due to its ability to adapt to basic pH, thus improving the physical properties and rejuvenating the micro-cracks. Experimentally, the addition of calcium lactate pentahydrate slightly affected the mortar properties. Likewise, bacteria-incorporated mortar exhibited an enhancement in the physical properties of mortar. The highest improvement of mechanical properties (an increase of 45% and 36% for compressive and indirect tensile strength, respectively) was achieved by the addition of calcium lactate pentahydrate incorporated with 10% v/v bacterial inoculum [about 7?×?107 CFU/ml (colony-forming unit/ml)]. The self-healing took place more rapidly on bacterial mortar supplemented with calcium lactate pentahydrate than on the control specimen. XRD analysis demonstrated that the mineralogical composition of self-healing precipitates was primarily dominated by calcite (CaCO3), indicating the capacity of L. sphaericus strain SKC/VA-1 to precipitate calcite through organic carbon oxidation for self-healing the artificial crack on the mortar. To our knowledge, this is the first report on the potential utilization of the bacterium L. sphaericus incorporated with calcium lactate pentahydrate to increase the mortar properties, including its self-healing ability. However, further study with the water-cement ratio variation is required to investigate the possibility of using L. sphaericus and calcium lactate pentahydrate as an alternative method rather than reducing the water-cement ratio to enhance the mortar properties.

Dataset Information

Evaluation of the Self-Healing Ability of Mortar Mixtures Containing Superabsorbent Polymers and Nanosilica.

Publications

Evaluation of the Self-Healing Ability of Mortar Mixtures Containing Superabsorbent Polymers and Nanosilica.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets