Validation data of parallel 3D surface-borehole electromagnetic forward modeling.
Ontology highlight
ABSTRACT:
SUBMITTER: Liu C
PROVIDER: S-EPMC7015985 | biostudies-literature | 2020 Apr
REPOSITORIES: biostudies-literature
Publications
Validation data of parallel 3D surface-borehole electromagnetic forward modeling.
Liu Chong C Cheng LiZhen L Abbassi Bahman B
Data in brief 20200130
Forward modeling of geophysical electromagnetic fields over large three-dimensional volumes is a heavy computational task that demands effective accelerating strategies. As a solution to this computational challenge, a hybrid parallel computing algorithm with multiple meshes has been previously proposed for 3D forward modeling of time-domain electromagnetic (TEM) fields by Liu et al. (2019). MPI and OpenMP were used for parallel computing and multiple meshes for optimizing the design of the geol ...[more]
Similar Datasets
Project description:Understanding the mechanisms of uterine contractions during pregnancy is especially important in predicting the onset of labor and thus in forecasting preterm deliveries. Preterm birth can cause serious health problems in newborns, as well as large financial burdens to society. Various techniques such as electromyography (EMG) and magnetomyography (MMG) have been developed to quantify uterine contractions. However, no widely accepted method to predict labor based on electromagnetic measurement is available. Therefore, developing a biophysical model of EMG and MMG could help better understand uterine contractions, interpret real measurements, and detect labor. In this work, we propose a multiscale realistic model of uterine contractions during pregnancy. At the cellular level, building on bifurcation theory, we apply generalized FitzHugh-Nagumo (FHN) equations that produces both plateau-type and bursting-type action potentials. At the tissue level, we introduce a random fiber orientation model applicable to an arbitrary uterine shape. We also develop an analytical expression for the propagation speed of transmembrane potential. At the organ level, a realistic volume conductor geometry model is provided based on magnetic resonance images of a pregnant woman. To simulate the measurements from the SQUID Array for Reproductive Assessment (SARA) device, we propose a sensor array model. Our model is able to reproduce the characteristics of action potentials. Additionally, we investigate the sensitivity of MMG to model configuration aspects such as volume geometry, fiber orientation, and pacemaker location. Our numerical results show that fiber orientation and pacemaker location are the key aspects that greatly affect the MMG as measured by the SARA device. We conclude that sphere is appropriate as an approximation of the volume geometry. The initial step towards validating the model against real MMG measurement is also presented. Our results show that the model is flexible to mimic the limited-propagation magnetic signature during the emergence and decay of a uterine contraction.
| S-EPMC4809542 | biostudies-literature
Project description:We present quantum mechanics (QM)/frequency dependent fluctuating charge (QM/ωFQ) and fluctuating dipoles (QM/ωFQFμ) multiscale approaches to model surface-enhanced Raman scattering spectra of molecular systems adsorbed on plasmonic nanostructures. The methods are based on a QM/classical partitioning of the system, where the plasmonic substrate is treated by means of the atomistic electromagnetic models ωFQ and ωFQFμ, which are able to describe in a unique fashion and at the same level of accuracy the plasmonic properties of noble metal nanostructures and graphene-based materials. Such methods are based on classical physics, i.e. Drude conduction theory, classical electrodynamics, and atomistic polarizability to account for interband transitions, by also including an ad-hoc phenomenological correction to describe quantum tunneling. QM/ωFQ and QM/ωFQFμ are thus applied to selected test cases, for which computed results are compared with available experiments, showing the robustness and reliability of both approaches.
| S-EPMC10308587 | biostudies-literature
Project description:With the advance in high-throughput sequencing technology, it is feasible to investigate the role of common and rare variants in disease risk prediction. While the new technology holds great promise to improve disease prediction, the massive amount of data and low frequency of rare variants pose great analytical challenges on risk prediction modeling. In this paper, we develop a forward random field method (FRF) for risk prediction modeling using sequencing data. In FRF, subjects' phenotypes are treated as stochastic realizations of a random field on a genetic space formed by subjects' genotypes, and an individual's phenotype can be predicted by adjacent subjects with similar genotypes. The FRF method allows for multiple similarity measures and candidate genes in the model, and adaptively chooses the optimal similarity measure and disease-associated genes to reflect the underlying disease model. It also avoids the specification of the threshold of rare variants and allows for different directions and magnitudes of genetic effects. Through simulations, we demonstrate the FRF method attains higher or comparable accuracy over commonly used support vector machine based methods under various disease models. We further illustrate the FRF method with an application to the sequencing data obtained from the Dallas Heart Study.
| S-EPMC4759688 | biostudies-literature
Project description:This paper examines the impact of ocean surface swell waves on near-coastal L-band high-resolution synthetic aperture radar (SAR) data collected using the National Aeronautics and Space Administration's (NASA) Soil Moisture Active/Passive (SMAP) radar at 40° incidence angle. The two-scale model and a more efficient off-nadir approximation of the second-order small-slope-approximation are used for co- and cross-polarized backscatter normalized radar cross-section (NRCS) predictions of the ocean surface, respectively. Backscatter NRCS predictions are modeled using a combined wind and swell model where wind-driven surface roughness is characterized using the Durden-Vesecky directional spectrum, while swell effects are represented through their contribution to the long wave slope variance (mean-square slopes, or MSS). The swell-only MSS is numerically computed based on a model defined using the JONSWAP spectrum with parameters calculated using the National Data Buoy Center and Wave Watch III data. The backscatter NRCS model is further refined to include fetch-limited and low-wind corrections. The results show an improved agreement between modeled and observed HH-polarized backscatter NRCS when swell effects are included and indicate a relatively larger swell impact on L-band compared to higher radar frequencies. Preliminary investigations into the potential swell retrieval capabilities in the form of excess MSS are encouraging, however further refinements are required to make broadly applicable conclusions.
| S-EPMC8779461 | biostudies-literature
Project description:Respiratory motion modeling of both tumor and surrounding tissues is a key element in minimizing errors and uncertainties in radiation therapy. Different continuous motion models have been previously developed. However, most of these models are based on the use of parameters such as amplitude and phase extracted from 1D external respiratory signal. A potentially reduced correlation between the internal structures (tumor and healthy organs) and the corresponding external surrogates obtained from such 1D respiratory signal is a limitation of these models. The objective of this work is to describe a continuous patient specific respiratory motion model, accounting for the irregular nature of respiratory signals, using patient external surface information as surrogate measures rather than a 1D respiratory signal.Ten patients were used in this study having each one 4D CT series, a synchronized RPM signal and patient surfaces extracted from the 4D CT volumes using a threshold based segmentation algorithm. A patient specific model based on the use of principal component analysis was subsequently constructed. This model relates the internal motion described by deformation matrices and the external motion characterized by the amplitude and the phase of the respiratory signal in the case of the RPM or using specific regions of interest (ROI) in the case of the patients' external surface utilization. The capability of the different models considered to handle the irregular nature of respiration was assessed using two repeated 4D CT acquisitions (in two patients) and static CT images acquired at extreme respiration conditions (end of inspiration and expiration) for one patient.Both quantitative and qualitative parameters covering local and global measures, including an expert observer study, were used to assess and compare the performance of the different motion estimation models considered. Results indicate that using surface information [correlation coefficient (CC): 0.998 ± 0.0006 and model error (ME): 1.35 ± 0.21 mm] is superior to the use of both motion phase and amplitude extracted from a 1D respiratory signal (CC and ME of 0.971 ± 0.02 and 1.64 ± 0.28 mm). The difference in performance was more substantial compared to the use of only one parameter (phase or amplitude) used in the motion model construction. Similarly, the patient surface based model was better in estimating the motion in the repeated 4D CT acquisitions and those CT images acquired at the full inspiration (FI) and the full expiration (FE). Once more, within this context the use of both amplitude and phase in the model building was substantially more robust than the use of phase or amplitude only.The present study demonstrates the potential of using external patient surfaces for the construction of patient specific respiratory motion models. Such information can be obtained using different devices currently available. The use of external surface information led to the best performance in estimating internal structure motion. On the other hand, the use of both amplitude and phase parameters derived from an 1D respiration signal led to largely superior model performance relative to the use of only one of these two parameters in the model building process.
| S-EPMC4032399 | biostudies-other
Project description:RNA is a unique bio-macromolecule that can both record genetic information and perform biological functions in a variety of molecular processes, including transcription, splicing, translation, and even regulating protein function. RNAs adopt specific three-dimensional conformations to enable their functions. Experimental determination of high-resolution RNA structures using x-ray crystallography is both laborious and demands expertise, thus, hindering our comprehension of RNA structural biology. The computational modeling of RNA structure was a milestone in the birth of bioinformatics. Although computational modeling has been greatly improved over the last decade showing many successful cases, the accuracy of such computational modeling is not only length-dependent but also varies according to the complexity of the structure. To increase credibility, various experimental data were integrated into computational modeling. In this review, we summarize the experiments that can be integrated into RNA structure modeling as well as the computational methods based on these experimental data. We also demonstrate how computational modeling can help the experimental determination of RNA structure. We highlight the recent advances in computational modeling which can offer reliable structure models using high-throughput experimental data.
| S-EPMC7649352 | biostudies-literature
Project description:This paper takes the specific environment covered by vegetation as the research object, carries out modeling and analysis, takes the large-scale fading model of wireless channel as the basis of data processing, researches the transmission law of electromagnetic wave in a typical vegetation environment, which can be divided into four situations. The signal attenuation in each case is theoretically derived and numerically simulated. From the view point of supporting vegetation environment channel, the large-scale channel measurement system is built to meet the actual needs, such as bandwidth, frequency, vegetation coverage, etc. the final vegetation environment channel model under the large-scale fading model is obtained. The results show that the path gain of four scenarios respectively are 81.3 dB, 36.5 dB, 1.6 dB, 1.5 dB, the value of path gain index is within the range of 2~3.5, four scenarios shadow fading standard deviation values are 7.1, 4.8, 10.1, 9.2, reflects the change of received power at the point caused by random factors such as reflection, absorption and scattering. In addition, the proposed channel model improves the gain about 15% compared with the tradition SUI model within vegetation coverage scene. The design process of the proposed model is carried out in the order of "studied the existing foundation → analyzed the existing problems → proposed the optimization scheme → simulation and verification results → actual measurement system". The advantage of paper's method is that, when the signal frequency, transceiver distance, antenna height and vegetation environment characteristic parameters are given, the statistical analysis results of wireless channel data are obtained. The purpose of the proposed work establishes a signal propagation prediction model under the vegetation environment, realizes a theoretical basis for channel simulation, and provides the basis of anti-fading technologies.
| S-EPMC9836301 | biostudies-literature
Project description:The cytokinesis-block micronucleus (CBMN) assay can be used to quantify micronucleus (MN) formation, the outcome measured being MN frequency. MN frequency has been shown to be both an accurate measure of chromosomal instability/DNA damage and a risk factor for cancer. Similarly, the Agilent 4×44k human oligonucleotide microarray can be used to quantify gene expression changes. Despite the existence of accepted methodologies to quantify both MN frequency and gene expression, very little is known about the association between the two. In modeling our count outcome (MN frequency) using gene expression levels from the high-throughput assay as our predictor variables, there are many more variables than observations. Hence, we extended the generalized monotone incremental forward stagewise method for predicting a count outcome for high-dimensional feature settings.
| S-EPMC4415688 | biostudies-literature
Project description:The AKT/mammalian target of rapamycin (mTOR) pathway is considered as one of the commonly activated and deregulated signaling pathways in human cancer. mTOR is associated with other proteins in two molecular complexes: mTOR complex 1/Raptor and the mTOR complex 2/Rictor. Using the crystal structure of the related lipid kinase PI3Kγ, we built a model of the catalytic region of mTOR. The modeling of the three-dimensional (3D) structure of the mTOR was performed by homology modeling program SWISS-MODEL. The quality and validation of the obtained model were performed using PROCHECK and PROVE softwares. The overall stereochemical property of the protein was assessed by the Ramachandran plot. The model validation was also done by docking of known inhibitors. In this paper, we describe and validate a 3D model for the mTOR catalytic site.
| S-EPMC4525790 | biostudies-literature
Project description:PurposeBody surface area is a physiological quantity relevant for many medical applications. In clinical practice, it is determined by empirical formulae. 3D laser-based anthropometry provides an easy and effective way to measure body surface area but is not ubiquitously available. We used data from laser-based anthropometry from a population-based study to assess validity of published and commonly used empirical formulae.MethodsWe performed a large population-based study on adults collecting classical anthropometric measurements and 3D body surface assessments (N = 1435). We determined reliability of the 3D body surface assessment and validity of 18 different empirical formulae proposed in the literature. The performance of these formulae is studied in subsets of sex and BMI. Finally, improvements of parameter settings of formulae and adjustments for sex and BMI were considered.Results3D body surface measurements show excellent intra- and inter-rater reliability of 0.998 (overall concordance correlation coefficient, OCCC was used as measure of agreement). Empirical formulae of Fujimoto and Watanabe, Shuter and Aslani and Sendroy and Cecchini performed best with excellent concordance with OCCC > 0.949 even in subgroups of sex and BMI. Re-parametrization of formulae and adjustment for sex and BMI slightly improved results.ConclusionIn adults, 3D laser-based body surface assessment is a reliable alternative to estimation by empirical formulae. However, there are empirical formulae showing excellent results even in subgroups of sex and BMI with only little room for improvement.
| S-EPMC5313586 | biostudies-literature