Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Polymer-Based Membranes for Oily Wastewater Remediation.

ABSTRACT: The compounds found in industrial wastewater typically show high toxicity, and in this way, they have become a primary environmental concern. Several techniques have been applied in industrial effluent remediation. In spite of the efforts, these techniques are yet to be ineffective to treat oily wastewater before it can be discharged safely to the environment. Membrane technology is an attractive approach to treat oily wastewater. This is dedicated to the immobilisation of TiO2 nanoparticles on poly(vinylidene fluoride-trifluoro ethylene) (PVDF-TrFE) porous matrix by solvent casting. Membranes with interconnected pores with an average diameter of 60 µm and a contact angle of 97°, decorated with TiO2 nanoparticles, are obtained. The degradation of oily wastewater demonstrated the high photocatalytic efficiency of the nanocomposite membranes: Under sunlight irradiation for seven hours, colourless water was obtained.

SUBMITTER: Zioui D

PROVIDER: S-EPMC7023582 | biostudies-literature | 2019 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Polymer-Based Membranes for Oily Wastewater Remediation.

Zioui Djamila D Salazar Hugo H Aoudjit Lamine L Martins Pedro M PM Lanceros-Méndez Senentxu S

Polymers 20191226 1

The compounds found in industrial wastewater typically show high toxicity, and in this way, they have become a primary environmental concern. Several techniques have been applied in industrial effluent remediation. In spite of the efforts, these techniques are yet to be ineffective to treat oily wastewater before it can be discharged safely to the environment. Membrane technology is an attractive approach to treat oily wastewater. This is dedicated to the immobilisation of TiO<sub>2</sub> nanopa ...[more]

PMID: 31888040

Similar Datasets

Turbo-Synergistic Oily Wastewater Remediation in Bio-Inspired Cone Array Barrel.

Project description:Oily wastewater discharge causes not only the pollution of environment but also the waste of resources. Existing technologies for wastewater remediation, such as membrane and particle methods, are variable and effective, but are difficult for achieving continuous and rapid oil-water separation. Here, with the synergy of turbo stirring, a strategy for emulsion separation is demonstrated based on the bio-inspired cone array barrel. Under the centrifugal force, oil droplets in emulsion are thrown onto the cones arrayed on inner wall due to the Coriolis effect, captured by microstructures on cone surface and then penetrate out through the superhydrophobic pores, while only the remediated water remains. The separation technique maintains a high efficiency of above 99.5% for over 30 times of use, as well as for emulsions with variable ingredients. This structure-dynamics synergistic separation strategy evolves the future technologies on water purification in industrial and daily processes.

| S-EPMC9685448 | biostudies-literature

Extremophilic Exopolysaccharides: Biotechnologies and Wastewater Remediation.

Project description:Various microorganisms thrive under extreme environments, like hot springs, hydrothermal vents, deep marine ecosystems, hyperacid lakes, acid mine drainage, high UV exposure, and more. To survive against the deleterious effect of these extreme circumstances, they form a network of biofilm where exopolysaccharides (EPSs) comprise a substantial part. The EPSs are often polyanionic due to different functional groups in their structural backbone, including uronic acids, sulfated units, and phosphate groups. Altogether, these chemical groups provide EPSs with a negative charge allowing them to (a) act as ligands toward dissolved cations as well as trace, and toxic metals; (b) be tolerant to the presence of salts, surfactants, and alpha-hydroxyl acids; and (c) interface the solubilization of hydrocarbons. Owing to their unique structural and functional characteristics, EPSs are anticipated to be utilized industrially to remediation of metals, crude oil, and hydrocarbons from contaminated wastewaters, mines, and oil spills. The biotechnological advantages of extremophilic EPSs are more diverse than traditional biopolymers. The present review aims at discussing the mechanisms and strategies for using EPSs from extremophiles in industries and environment bioremediation. Additionally, the potential of EPSs as fascinating biomaterials to mediate biogenic nanoparticles synthesis and treat multicomponent water contaminants is discussed.

| S-EPMC8417407 | biostudies-literature

Oily Wastewater Treatment Using Polyamide Thin Film Composite Membrane Technology.

Project description:In this study, polyamide (PA) thin film composite (TFC) reverse osmosis (RO) membrane filtration was used in edible oil wastewater emulsion treatment. The PA-TFC membrane was characterized using mechanical, thermal, chemical, and physical tests. Surface morphology and cross-sections of TFCs were characterized using SEM. The effects of edible oil concentrations, average droplets size, and contact angle on separation efficiency and flux were studied in detail. Purification performance was enhanced using activated carbon as a pre-treatment unit. The performance of the RO unit was assessed by chemical oxygen demand (COD) removal and permeate flux. Oil concentration in wastewater varied between 3000 mg/L and 6000 mg/L. Oily wastewater showed a higher contact angle (62.9°) than de-ionized water (33°). Experimental results showed that the presence of activated carbon increases the permeation COD removal from 94% to 99%. The RO membrane filtration coupled with an activated carbon unit of oily wastewater is a convenient hybrid technique for removal of high-concentration edible oil wastewater emulsion up to 99%. Using activated carbon as an adsorption pre-treatment unit improved the permeate flux from 34 L/m2hr to 75 L/m2hr.

| S-EPMC7281104 | biostudies-literature

Starch-Derived Superabsorbent Polymer in Remediation of Solid Waste Sludge Based on Water-Polymer Interaction.

Project description:The purpose of this study is to assess water-polymer interaction in synthesized starch-derived superabsorbent polymer (S-SAP) for the treatment of solid waste sludge. While S-SAP for solid waste sludge treatment is still rare, it offers a lower cost for the safe disposal of sludge into the environment and recycling of treated solid as crop fertilizer. For that to be possible, the water-polymer interaction on S-SAP must first be fully comprehended. In this study, the S-SAP was prepared through graft polymerization of poly (methacrylic acid-co-sodium methacrylate) on the starch backbone. By analyzing the amylose unit, it was possible to avoid the complexity of polymer networks when considering S-SAP using molecular dynamics (MD) simulations and density functional theory (DFT). Through the simulations, formation of hydrogen bonding between starch and water on the H06 of amylose was assessed for its flexibility and less steric hindrance. Meanwhile, water penetration into S-SAP was recorded by the specific radial distribution function (RDF) of atom-molecule interaction in the amylose. The experimental evaluation of S-SAP correlated with high water capacity by measuring up to 500% of distilled water within 80 min and more than 195% of the water from solid waste sludge for 7 days. In addition, the S-SAP swelling showed a notable performance of a 77 g/g swelling ratio within 160 min, while a water retention test showed that S-SAP was capable of retaining more than 50% of the absorbed water within 5 h of heating at 60 °C. The water retention of S-SAP adheres to pseudo-second-order kinetics for chemisorption reactions. Therefore, the prepared S-SAP might have potential applications as a natural superabsorbent, especially for the development of sludge water removal technology.

| S-EPMC10051928 | biostudies-literature

Bioinspired polymer microstructures for directional transport of oily liquids.

Project description:Nature has always served as an inspiration for scientists, helping them to solve a large diversity of technical problems. In our case, we are interested in the directional transport of oily liquids and as a model for this application we used the flat bug Dysodius lunatus. In this report, we present arrays of drops looking like polymer microstructures produced by the two-photon polymerization technique that mimic the micro-ornamentation from the bug's cuticle. A good directionality of oil transport was achieved, directly controlled by the direction of the pointed microstructures at the surface. If the tips of the drop-like microstructures are pointing towards the left side, the liquid front moves to the right and vice versa. Similar effects could be expected for the transport of oily lubricants. These results could, therefore, be interesting for applications in friction and wear reduction.

| S-EPMC5383830 | biostudies-literature

Separation of Mercury(II) from Industrial Wastewater through Polymer Inclusion Membranes with Calix[4]pyrrole Derivative.

Project description:Polymer membranes with immobilized ligands are encouraging alternatives for the removal of toxic metal ions from aquatic waste streams, including industrial wastewater, in view of their high selectivity, stability, removal efficacy and low energy demands. In this study, polymer inclusion membranes (PIMs) based on cellulose triacetate, with a calix[4]pyrrole derivative as an ion carrier, were tested for their capability to dispose mercury (Hg(II)) ions from industrial wastewater. The impacts were assessed relative to carrier content, the quantity of plasticizer in the membrane, the hydrocholoric acid concentration in the source phase, and the character of the receiving phase on the performance of Hg(II) elimination. Optimally designed PIMs could be an interesting option for the industrial wastewater treatment due to the high removal efficiency of Hg(II) and great repeatability.

| S-EPMC9147343 | biostudies-literature

Turning Tissue Waste into High-Performance Microfiber Filters for Oily Wastewater Treatment.

Project description:Developing low-cost, durable, and high-performance materials for the separation of water/oil mixtures (free oil/water mixtures and emulsions) is critical to wastewater treatment and resource recovery. However, this currently remains a challenge. In this work, we report a biopolymer microfiber assembly, fabricated from the recovery of tissue waste, as a low-cost and high-performance filter for oily wastewater treatment. The microfiber filters demonstrate superhydrophilicity (water contact angle of 28.8°) and underwater superoleophobicity (oil contact angle of 154.2°), and thus can achieve separation efficiencies of >96% for both free oil/water mixtures and surfactant-stabilized emulsions even in highly acidic (pH 2.2)/alkaline (pH 11.8) conditions. Additionally, the prepared microfiber filters possess a much higher resistance to oil fouling than conventional membranes when filtering emulsions, which is because the large-sized 3D interconnected channels of the filters can delay the formation of a low-porosity oil gel layer on their surface. The filters are expected to practically apply for the oily wastewater treatment and reduce the amount of tissue waste entering the environment.

| S-EPMC7013821 | biostudies-literature

Versatile Application of TiO2@PDA Modified Filter Paper for Oily Wastewater Treatment

Project description: Not available

| S-EPMC10708479 | biostudies-literature

Characterisation of <i>Streptomyces violascens</i> OC125-8 lipase for oily wastewater treatment.

Project description:In this study, the lipase-producing bacterium Streptomyces violascens (GenBank number MF621564) was identified, and the extracellular S. violascens OC125-8 lipase produced by this strain was characterised for use in wastewater treatment. The lipase was partially purified by ammonium sulphate precipitation at a final yield of 3.28-fold purification and a recovery of 56%. The S. violascens OC125-8 lipase exhibited optimum catalytic activity at 40 °C and pH 8.0; it was stable at 30-40 °C with more than 86% residual activity after 1 h; it was also stable over a relatively broad pH range of pH 7.0-11.0, retaining 83.3-100% activity. V max and K m values were calculated as 0.61 µmol/min/mg and 0.259 mM, respectively. Enzyme activity significantly increased in the presence of Fe2+ ion but was inhibited by Ca2+, Mn2+, Cu2+ and Mg2+. The addition of a serine protease inhibitor, phenylmethylsulfonyl fluoride (PMSF), strongly inhibited enzyme activity while ethylenediaminetetraacetic acid (EDTA), a metal chelating agent, had no inhibitory effect. The enzyme was fairly stable in the presence of surfactants as well as sodium perborate. Examination of commercial detergent tolerance revealed that the lipase was strongly stable in Tursil (88%), Pril (97%) and Fairy (98.5%), while the lipase was activated in Omo (113.4%) and Ariel (128.3%). Moreover, the lipase showed highest activity towards olive oil (100%), sunflower oil (90%) and burned sunflower oil (55%), while corn oil (44%) and burned olive oil (15%) were less hydrolysed by the enzyme. These properties demonstrate that S. violascens OC125-8 lipase is an ideal choice for oily wastewater management.

| S-EPMC6312823 | biostudies-literature

Efficiency and bacterial diversity of an improved anaerobic baffled reactor for the remediation of wastewater from alkaline-surfactant-polymer (ASP) flooding technology.

Project description:Alkaline-surfactant-polymer (ASP) flooding technology is used to maximize crude oil recovery. However, the extensive use of alkaline materials makes it difficult to treat the water used. Here, an improved multi-zone anaerobic baffled reactor (ABR) using FeSO4 as electron acceptor was employed to treat the wastewater from ASP flooding technology, and the effects on major pollutants (hydrolyzed polyacrylamide, petroleum substances, surfactants suspended solids) and associated parameters (chemical oxygen demand, viscosity) were evaluated. Gas chromatography-mass spectrometry (GC-MS) was used to follow the degradation and evolution of organic compounds while high-throughput DNA sequencing was used to determine the bacterial diversity in the ABR. The results obtained after 90 d of operation showed decreases in all parameters measured and the highest mean removal rates were obtained for petroleum substances (98.8%) and suspended solids (77.0%). Amounts of petroleum substances in the ABR effluent could meet the requirements of a national standard for oilfield reinjection water. GC-MS analysis showed that a wide range of chemicals (e.g. aromatic hydrocarbons, esters, alcohols, ketones) could be sequentially removed from the influent by each zone of ABR. The high-throughput DNA sequencing showed that the bacteria Micropruina, Saccharibacteria and Synergistaceae were involved in the degradation of pollutants in the anaerobic and anoxic reaction zones, while Rhodobacteraceae and Aliihoeflea were the main functional microorganisms in the aerobic reaction zones. The results demonstrated that the improved ABR reactor had the potential for the treatment of wastewater from ASP flooding technology.

| S-EPMC8741043 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data