Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

1,4-D-Glucan block copolymers: synthesis and comprehensive structural characterization.

ABSTRACT: Multi-block glucans comprising permethylated and partially methylated blocks are compounds of interest. In order to monitor their formation by transglycosylation of corresponding starting glucans, a method has been developed and applied to model compounds. This method allows determining the average length of the blocks and the progress of incorporation of methyl blocks in partially methylated sequences with a random distribution. The method, comprising liquid chromatography mass spectrometry (LC-MS) and electrospray ionization collision-induced dissociation tandem mass spectrometry (ESI-CID-MSn) measurements of two types of peralkylated glucans representing derivatives of the target compounds, is comprehensively described and discussed. ESI-MSn allows looking into the sequences of oligomeric domains. In addition, transglycosylation is followed by attenuated total reflection FTIR and NMR spectroscopy. Graphical abstract.

SUBMITTER: Hashemi P

PROVIDER: S-EPMC7026270 | biostudies-literature | 2020 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

1,4-D-Glucan block copolymers: synthesis and comprehensive structural characterization.

Hashemi Payam P Mischnick Petra P

Analytical and bioanalytical chemistry 20200120 7

Multi-block glucans comprising permethylated and partially methylated blocks are compounds of interest. In order to monitor their formation by transglycosylation of corresponding starting glucans, a method has been developed and applied to model compounds. This method allows determining the average length of the blocks and the progress of incorporation of methyl blocks in partially methylated sequences with a random distribution. The method, comprising liquid chromatography mass spectrometry (LC ...[more]

PMID: 31960080

Similar Datasets

Synthesis and Characterization of N-Substituted Polyether-Block-Amide Copolymers.

Project description:A series of N-substituted polyether-block-amide (PEBA-X%) copolymers were prepared by melt polycondensation of nylon-6 prepolymer and polytetramethylene ether glycol at an elevated temperature using titanium isopropoxide as a catalyst. The structure, thermal properties, and crystallinity of PEBA-X% were investigated using nuclear magnetic resonance spectroscopy, Fourier-transform infrared spectroscopy, differential scanning calorimetry, wide angle X-ray diffraction, and thermogravimetric analysis. In general, the crystallinity, melting point, and thermal degradation temperature of PEBA-X% decreased as the incorporation of N-methyl functionalized groups increased, owing to the disruption caused to the structural regularity of the copolymer. However, in N-acetyl functionalized analogues, the crystallinity first dropped and then increased because of a new γ form arrangement that developed in the microstructure. After the cross-linking reaction of the N-methyl-substituted derivative, which has electron-donating characteristics, with poly(4,4'-methylenebis(phenyl isocyanate), the decomposition temperature of the resulting polymer significantly increased, whereas no such improvements could be observed in the case of the electro-withdrawing N-acetyl-substituted derivative, because of the incompleteness of its cross-linking reaction.

| S-EPMC7915099 | biostudies-literature

Synthesis and Characterization of Phosphorus- and Carborane-Containing Polyoxanorbornene Block Copolymers.

Project description:Grubbs-catalyzed ring-opening metathesis polymerization (ROMP) of carborane- and phosphonate-containing monomers has been used for the generation of hybrid block copolymers. Molecular weights with Mn of 50,000 g/mol were readily obtained with polydispersity index values, ?, between 1.03?1.08. Reaction of the phospha ester and carborane substituted oxanorbornene block copolymer with trimethylsilyl bromide led to a new polymer with phosphonic acid functionalities. In application studies, the phospha-carborane functionalized block polymer was tested as heat resistance material. Thermal stability was investigated by thermal gravimetric analysis (TGA) and microscale combustion calorimetry (MCC) analysis. Thermal treatment and ceramic yield under air were directly correlated to the carborane content of the block copolymer. However, phosphorus content in the polymer was more crucial for the char residues when heated under nitrogen atmosphere. The peak heat release rate (PHRR) increased as the number of phosphonate functionalities increased. However, corresponding phosphonic acid derivatives featured a lower heat release rate and total heat release. Moreover, the phosphonic acid functionalities of the block copolymer offer efficient chelating capabilities for iron nanoparticles, which is of interest for applications in biomedicine in the future. The complexation with iron oxide nanoparticles was studied by transmission electron microscopy (TEM) and inductively coupled plasma mass spectrometry (ICP?MS).

| S-EPMC6523416 | biostudies-literature

Fully Automated Multi-Step Synthesis of Block Copolymers.

Project description:An automated synthesis protocol is developed for the synthesis of block copolymers in a multi-step approach in a fully automated manner. For this purpose, an automated dialysis setup is combined with robot-based synthesis protocols. Consequently, several block copolymerizations are executed completely automated and compared to the respective manual synthesis. As a result, this study opens up the field of autonomous multi-step reactions without any human interactions.

| S-EPMC8780857 | biostudies-literature

Donor-Acceptor Block Copolymers: Synthesis and Solar Cell Applications.

Project description:Fullerene derivatives have been widely used for conventional acceptor materials in organic photovoltaics (OPVs) because of their high electron mobility. However, there are also considerable drawbacks for use in OPVs, such as negligible light absorption in the visible-near-IR regions, less compatibility with donor polymeric materials and high cost for synthesis and purification. Therefore, the investigation of non-fullerene acceptor materials that can potentially replace fullerene derivatives in OPVs is increasingly necessary, which gives rise to the possibility of fabricating all-polymer (polymer/polymer) solar cells that can deliver higher performance and that are potentially cheaper than fullerene-based OPVs. Recently, considerable attention has been paid to donor-acceptor (D-A) block copolymers, because of their promising applications as fullerene alternative materials in all-polymer solar cells. However, the synthesis of D-A block copolymers is still a challenge, and therefore, the establishment of an efficient synthetic method is now essential. This review highlights the recent advances in D-A block copolymers synthesis and their applications in all-polymer solar cells.

| S-EPMC5453375 | biostudies-other

Synthesis and Characterization of Block Copolymers of Poly(silylene diethynylbenzen) and Poly(silylene dipropargyl aryl ether).

Project description:Poly(silylene diethynylbenzene)-b-poly(silylene dipropargyloxy diphenyl propane) copolymer (ABA-A), poly(silylene diethynylbenzene)-b-poly(silylene dipropargyloxy diphenyl ether) copolymer (ABA-O), and a contrast poly(silylene diethynylbenzene) with equivalent polymerization degree were synthesized through Grignard reactions. The structures and properties of the copolymers were investigated via hydrogen nuclear magnetic resonance, Fourier transform infrared spectroscopy, Haake torque rheometer, differential scanning calorimetry, dynamic mechanical analysis, thermogravimetric analysis and mechanical tests. The results show that the block copolymers possess comprehensive properties, especially good processability and good mechanical properties. The processing windows of these copolymers are wider than 58 °C. The flexural strength of the cured ABA-A copolymer reaches as high as 40.2 MPa. The degradation temperatures at 5% weight loss (Td5) of the cured copolymers in nitrogen are all above 560 °C.

| S-EPMC8125851 | biostudies-literature

Cell wall beta-(1,6)-glucan of Saccharomyces cerevisiae: structural characterization and in situ synthesis.

Project description:Despite its essential role in the yeast cell wall, the exact composition of the beta-(1,6)-glucan component is not well characterized. While solubilizing the cell wall alkali-insoluble fraction from a wild type strain of Saccharomyces cerevisiae using a recombinant beta-(1,3)-glucanase followed by chromatographic characterization of the digest on an anion exchange column, we observed a soluble polymer that eluted at the end of the solvent gradient run. Further characterization indicated this soluble polymer to have a molecular mass of approximately 38 kDa and could be hydrolyzed only by beta-(1,6)-glucanase. Gas chromatography mass spectrometry and NMR ((1)H and (13)C) analyses confirmed it to be a beta-(1,6)-glucan polymer with, on average, branching at every fifth residue with one or two beta-(1,3)-linked glucose units in the side chain. This polymer peak was significantly reduced in the corresponding digests from mutants of the kre genes (kre9 and kre5) that are known to play a crucial role in the beta-(1,6)-glucan biosynthesis. In the current study, we have developed a biochemical assay wherein incubation of UDP-[(14)C]glucose with permeabilized S. cerevisiae yeasts resulted in the synthesis of a polymer chemically identical to the branched beta-(1,6)-glucan isolated from the cell wall. Using this assay, parameters essential for beta-(1,6)-glucan synthetic activity were defined.

| S-EPMC2679440 | biostudies-literature

Catalytic synthesis of functionalized (polar and non-polar) polyolefin block copolymers.

Project description:Herein, we report a methodology for the synthesis of polyolefin containing block-copolymers using a catalytic postpolymerization modification strategy. The most common polyolefin grades are converted into macroinitiators using a cross-metathesis reaction. These functionalized polyolefins are then used to initiate living: coordinative ring opening polymerization of lactide, anionic ring opening polymerization of epoxide, and radical polymerization of styrene to yield the corresponding block copolymers. The high activity of the catalysts employed in the different steps offers improved practicality for scalable synthesis.

| S-EPMC5969503 | biostudies-literature

A New Approach to The Synthesis of Polylactide/Polyacrylonitrile Block Copolymers.

Project description:As a result of the search for alternatives to the known methods for the synthesis of PLA/vinyl polymer block copolymers, a new approach based on the "iniferter" concept was demonstrated in this article. In this approach, the introduction of a group that was capable of forming radicals and initiating radical polymerization into the polylactide (PLA) chain was conducted. Then, the obtained functional PLA was heated in the presence of a radically polymerizable monomer. The tetraphenylethane (TPE) group was chosen as a group that could dissociate to radicals. PLA with a TPE group in the middle of the chain was prepared in several steps as follows: (1) the synthesis of 4-(2-hydroxyethoxy)benzophenone (HBP-ET); (2) the polymerization of lactide, which was initiated with HBP-ET; and (3) the coupling of HBP-ET chains under UV radiation to form TPE-diET_PLA. A "macroiniferter", i.e., TPE-diET_PLA, was used to initiate the polymerization of acrylonitrile (AN) by heating substrates at 85 °C. 1H and 13C NMR and SEC analyses of the products indicated that the triblock copolymer PLA-PAN-PLA formed and thus confirmed the assumed mechanism of the initiation of AN polymerization, which relied on the addition of the radical that formed from TPE (linked with the PLA chain) to the monomer molecule. Copolymerizations were performed with the application of prepared TPE-diET_PLA with three different Mn's (1400, 2200, and 3300) and with different AN/PLA ratios, producing copolymers with varied compositions, i.e., with AN/LA ratios in the range of 2.3-11.1 and Mn's in the range of 5100-9400. It was shown that the AN/LA ratio in the copolymer was increasable by the applied excess of AN with respect to the PLA macroiniferter in the feed and that more AN monomer was able to be introduced to PLA with shorter chains.

| S-EPMC9031765 | biostudies-literature

Structural Color for Additive Manufacturing: 3D-Printed Photonic Crystals from Block Copolymers.

Project description:The incorporation of structural color into 3D printed parts is reported, presenting an alternative to the need for pigments or dyes for colored parts produced through additive manufacturing. Thermoplastic build materials composed of dendritic block copolymers were designed, synthesized, and used to additively manufacture plastic parts exhibiting structural color. The reflection properties of the photonic crystals arise from the periodic nanostructure formed through block copolymer self-assembly during polymer processing. The wavelength of reflected light could be tuned across the visible spectrum by synthetically controlling the block copolymer molecular weight and manufacture parts that reflected violet, green, or orange light with the capacity to serve as selective optical filters and light guides.

| S-EPMC5485652 | biostudies-literature

Supramolecular Networks from Block Copolymers Based on Styrene and Isoprene Using Hydrogen Bonding Motifs-Part 1: Synthesis and Characterization.

Project description:The combination of controlled anionic polymerization and subsequent introduction of hydrogen bonding groups was established to form thermo-reversible, supramolecular networks. Several polyisoprene-block-polystyrene-block-polyisoprene (ISI) copolymers-with polystyrene (PS) as the main block, and consequently giving the decisive material characteristics-were synthesized. The novel modification approach to post-functionalize the polyisoprene (PI) end-blocks and to introduce different motifs, which are able to form self-complementary hydrogen bonds, was attained. In the first step, hydroxylation was accomplished using 9-borabicyclo[3.3.1]nonane. Starting from the hydroxylated polymer, esterification with succinic anhydride was implemented to form an ester group with carboxylic end-group (-O-CO-CH₂-CH₂-COOH). In a second approach, 1,1'-carbonyldiimidazole was used as coupling agent to introduce various types of diamines (diethylenetriamine, triethylentetramine, and 2,6-diaminopyridine) to prepare urethane groups with amine end-group (-O-CO-NH-R-NH₂). ¹H NMR spectroscopy was used to confirm the successful synthesis and to calculate the degree of functionalization Df. Differential scanning calorimetry (DSC) showed a difference of the glass transition temperature Tg between unfunctionalized and functionalized block copolymers, but no greater influence between the different types of modification, and thus, on the Tg of the PS block. In temperature dependent FTIR spectroscopy, reversible processes were observed.

| S-EPMC6164727 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data