Evaluating the mineral commodity supply risk of the U.S. manufacturing sector.
Ontology highlight
ABSTRACT:
SUBMITTER: Nassar NT
PROVIDER: S-EPMC7035000 | biostudies-literature | 2020 Feb
REPOSITORIES: biostudies-literature
Publications
Evaluating the mineral commodity supply risk of the U.S. manufacturing sector.
Nassar Nedal T NT Brainard Jamie J Gulley Andrew A Manley Ross R Matos Grecia G Lederer Graham G Bird Laurence R LR Pineault David D Alonso Elisa E Gambogi Joseph J Fortier Steven M SM
Science advances 20200221 8
Trade tensions, resource nationalism, and various other factors are increasing concerns regarding the supply reliability of nonfuel mineral commodities. This is especially the case for commodities required for new and emerging technologies ranging from electric vehicles to wind turbines. In this analysis, we use a conventional risk-modeling framework to develop and apply a new methodology for assessing the supply risk to the U.S. manufacturing sector. Specifically, supply risk is defined as the ...[more]
Similar Datasets
Project description:The trade in agricultural commodities is a backbone of the global economy but is a major cause of negative social and environmental impacts, not least deforestation. Commodity traders are key actors in efforts to eliminate deforestation-they are active in the regions where commodities are produced and represent a "pinch point" in global trade that provides a powerful lever for change. However, the procurement strategies of traders remain opaque. Here, we catalog traders' sourcing across four sectors with high rates of commodity-driven deforestation: South American soy, cocoa from Côte d'Ivoire, Indonesian palm oil, and Brazilian live cattle exports. We show that traders often source more than 40% of commodities "indirectly" via local intermediaries and that indirect sourcing is a major blind spot for sustainable sourcing initiatives. To eliminate deforestation, indirect sourcing must be included in sectoral initiatives, and landscape or jurisdictional approaches, which internalize indirect sourcing, must be scaled up.
| S-EPMC9054003 | biostudies-literature
Project description:A sustainable closed-loop manufacturing would become reality if commodity plastics can be upcycled into higher-performance materials with facile processability. Such circularity will be realized when the upcycled plastics can be (re)processed into custom-designed structures through energy/resource-efficient additive manufacturing methods, especially by approachable and scalable fused filament fabrication (FFF). Here, we introduce a circular model epitomized by upcycling a prominent thermoplastic, acrylonitrile butadiene styrene (ABS) into a recyclable, robust adaptive dynamic covalent network (ABS-vitrimer) (re)printable via FFF. The full FFF processing of ABS-vitrimer overcomes the major challenge of (re)printing cross-linked materials and produces stronger, tougher, solvent-resistant three-dimensional objects directly reprintable and separable from unsorted plastic waste. This study thus offers an imminently adoptable approach for advanced manufacturing toward the circular plastics economy.
| S-EPMC9166624 | biostudies-literature
Project description:Tanzania’s supply chain system is a complicated web of integrated and vertical systems, covering essential and vertical programs health commodities, laboratory and diagnostics, equipment, and supplies. Despite significant improvement in the supply chain over the decades, the availability of medicines has remained uneven. Therefore, identifying the cost of operating the supply chain is vital to facilitate allocation of adequate finances to run the supply chain. We adopted a three-step approach to costing, which included i) identification, ii) measurement, and (iii) valuation of the resource use. Two levels of the Tanzanian supply chain system were examined to determine the cost of running the supply chain by function. These included first the Medical Stores Department (MSD) central and zonal level, secondly the health service delivery level that include National, Zonal and regional hospitals and the Primary Health Care (District Hospital, health center and Dispensary). The review adopted the health system perspective, whereby all resources consumed in delivering health commodities were considered, resource use was then classified as financial and economic costs. The costing period was an average of two financial years, 2015/16 and 2016/17. The cost data were exchanged from Tanzania Shillings to 2017 US$ and then adjusted for inflation to 2020 US$. The study used the total sales reported in audited financial accounts for throughput value. The average annual costs of running the supply chain at the central MSD was estimated at USD$ 15.5 million and US$ 4.1 million at the four sampled MSD Zonal branches. There is a wide variation in annual running costs among MSD zonal branches; the supply chain’s unit cost was highest in the Dodoma zone and lowest in the Mwanza zone at 26% and 8%, respectively. When examined on a cost-per-unit basis, supply chain systems operate at sub-optimal levels at health facilities at a unit cost of 37% per unit of commodity throughput value. There are inefficiencies in supply chain financing in Tanzania. Storage costs are higher than distribution costs, this may imply some efficiency gains. MSD should employ a "just in time" inventory model, reducing the inventory holding costs, including the high-expired commodities holding charge, this could be improved by increasing the order fill rate.
| S-EPMC10022133 | biostudies-literature
Project description:BackgroundCommunity health workers (CHWs) provide preventive care and integrated community case management (iCCM) to people with low healthcare access worldwide. CHW programmes have helped reduce mortality in myriad countries, but little data on malaria supply chain management has been shared. This project evaluated the current composition, use, and delivery of malaria iCCM kit commodities in Mozambique-rapid diagnostic tests (RDTs) and artemether-lumefantrine (AL) treatments-to better tailor existing resources to the needs of CHWs in diverse practice settings.MethodsHealth facilities in Maputo (low malaria burden), Inhambane (moderate), and Nampula (high) Provinces were selected using probability proportionate to the number of CHWs at each facility. All CHWs and their supervisors at selected facilities were interviewed using a structured questionnaire to document experiences with kit commodities. Data were analysed to assess CHW commodity stock levels by province and season.ResultsIn total, 216 CHWs and 56 supervisors were interviewed at 56 health facilities. CHWs reported receiving an average of 6.7 kits in the last year, although they are intended to receive kits monthly. One-tenth of CHWs reported receiving kits with missing RDTs, and 28% reported lacking some AL treatments. Commodity use was highest in the rainy season. Stockouts were reported by CHWs in all provinces, more commonly in the rainy season. Facility-level stockouts of RDTs or some AL formulation in the past year were reported by 66% of supervisors. Use of CHW kit materials by health facilities was reported by 43% of supervisors; this was most common at facilities experiencing stockouts.ConclusionsVariations in geographic and seasonal malaria commodity needs should be considered in CHW kit distribution planning in Mozambique. Improvements in provision of complete, monthly CHW kits are needed in parallel with improvements in the broader commodity system strengthening. The findings of this evaluation can help other CHW programmes determine best practices for management of iCCM supply chains.
| S-EPMC6385463 | biostudies-literature
Project description:Green hydrogen can help to decarbonize parts of the transportation sector, but its power sector interactions are not well understood so far. It may contribute to integrating variable renewable energy sources if production is sufficiently flexible in time. Using an open-source co-optimization model of the power sector and four options for supplying hydrogen at German filling stations, we find a trade-off between energy efficiency and temporal flexibility. For lower shares of renewables and hydrogen, more energy-efficient and less flexible small-scale on-site electrolysis is optimal. For higher shares of renewables and/or hydrogen, more flexible but less energy-efficient large-scale hydrogen supply chains gain importance, as they allow to temporally disentangle hydrogen production from demand via storage. Liquid hydrogen emerges as particularly beneficial, followed by liquid organic hydrogen carriers and gaseous hydrogen. Large-scale hydrogen supply chains can deliver substantial power sector benefits, mainly through reduced renewable curtailment. Energy modelers and system planners should consider the distinct flexibility characteristics of hydrogen supply chains in more detail when assessing the role of green hydrogen in future energy transition scenarios. We also propose two alternative cost and emission metrics which could be useful in future analyses.
| S-EPMC8271012 | biostudies-literature
Project description:This article investigates how the shift from food-away-from-home and towards food-at-home at the onset of the COVID-19 pandemic affected the U.S. egg industry. We find that the pandemic increased retail and farm-gate prices for table eggs by approximately 141% and 182%, respectively. In contrast, prices for breaking stock eggs-which are primarily used in foodservice and restaurants-fell by 67%. On April 3, 2020, the FDA responded by issuing temporary exemptions from certain food safety standards for breaking stock egg producers seeking to sell into the retail table egg market. We find that this regulatory change rapidly pushed retail, farm-gate, and breaking stock prices towards their long-run pre-pandemic equilibrium dynamics. The pandemic reduced premiums for credence attributes, including cage-free, vegetarian-fed, and organic eggs, by as much as 34%. These premiums did not fully recover following the return to more "normal" price dynamics, possibly signaling that willingness-to-pay for animal welfare and environmental sustainability have fallen as consumers seek to meet basic needs during the pandemic. Finally, in spite of widespread claims of price gouging, we do not find that the pandemic (or the subsequent FDA regulatory changes) had a meaningful impact on the marketing margin for table eggs sold at grocery stores.
| S-EPMC9758591 | biostudies-literature
Project description:Previous researches for understanding supply chain relationship have mostly focused on its vertical collaboration between buyers and suppliers. However, there have been some instances of volatile and stable collaborative relationships amongst competitors such as Apple-Samsung product manufacturer-component supplier relationship and airline alliances, respectively, which is recognized as coopetition. Even though there have been several qualitative studies and a number of game theory models on coopetition, it is rare to find any attempts on quantitative characterization of such coopetitive dynamic behavior in supply chain relationship. Hence, in this work, we formulated a MINLP model mathematically representing coopetitive relationships in a cost efficient supply chain network. In particular, the coopetition factor was newly introduced to measure the degree of coopetition among supply chain players and determine the optimal level of coopetition to engage in. The utility and practicality of the model were strongly demonstrated using a case study of a hypothetical smartphone supply chain network under different scenarios, thus proposing their strategically viable optimal interactions. Therefore, this exploratory study can herald a new era of global coopetitive business.
| S-EPMC4506052 | biostudies-literature
Project description:BackgroundExamining professional assessments of a blood product recall/withdrawal and its implications for risk and public health, the paper introduces ideas about perceptions of minimal risk and its management. It also describes the context of publicly funded blood transfusion in Canada and the withdrawal event that is the basis of this study.MethodsInterviews with 45 experts from administration, medicine, blood supply, laboratory services and risk assessment took place using a multi-level sampling framework in the aftermath of the recall. These experts either directly dealt with the withdrawal or were involved in the management of the blood supply at the national level. Data from these interviews were coded in NVivo for analysis and interpretation. Analytically, data were interpreted to derive typifications to relate interview responses to risk management heuristics.ResultsWhile all those interviewed agreed on the importance of patient safety, differences in the ways in which the risk was contextualized and explicated were discerned. Risk was seen in terms of patient safety, liability or precaution. These different risk logics are illustrated by selected quotations.ConclusionsExpert assessments did not fully converge and it is possible that these different risk logics and discourses may affect the risk management process more generally, although not necessarily in a negative way. Patient safety is not to be compromised but management of blood risk in publicly funded systems may vary. We suggest ways of managing blood risk using formal and safety case approaches.
| S-EPMC3223866 | biostudies-literature
Project description:The world needs to rapidly reduce emissions of carbon dioxide (CO2) emission to stave off the risks of disastrous climate change. In particular, decarbonizing U.S. manufacturing industries is particularly challenging due to the specific process requirements. This study estimates the potential for future CO2 emission reductions in this important sector. The analysis is a detailed accounting exercise that relies on estimates of emission-reduction potential from other studies and applies those potentials to the manufacturing sector using a bottom-up approach. The actions are grouped into four "pillars" that support deep decarbonization of manufacturing (DDM): Energy Efficiency, Material Efficiency, Industry-Specific, and Power Grid. Based on this bottom-up approach, the analysis shows that an 86% reduction in carbon dioxide emissions from the Reference Case is feasible. No single pillar dominates DDM, although opportunities vary widely by sub-sector. The analysis shows that a strategy incorporating a broad set of elements from each pillar can be effective instead of relying on any single pillar. Some pillars, such as Energy Efficiency and Material Efficiency, have wide applicability; others have key niche roles that are Industry-Specific; the Power Grid pillar requires interaction between grid decarbonization and industry action to switch from fossil fuels to zero-carbon electricity where appropriate.
| S-EPMC9446384 | biostudies-literature
Project description:The European Commission requested the EFSA Panel on Plant Health to prepare and deliver risk assessments for commodities listed in Commission Implementing Regulation EU/2018/2019 as 'High risk plants, plant products and other objects'. This Scientific Opinion covers all plant health risks posed by unrooted cuttings of Jasminum polyanthum produced in a protected environment (greenhouse) that are imported from Israel, taking into account the available scientific information, including the technical information provided by the NPPO of Israel by 15 March 2020. The relevance of an EU quarantine pest for this opinion was based on evidence that: (i) the pest is present in Israel; (ii) Jasminum is a host of the pest; and (iii) the pest can be associated with the commodity. The relevance of any other pest, not regulated in the EU, was based on evidence that: (i) the pest is present in Israel; (ii) the pest is absent in the EU; (iii) Jasminum is a host of the pest; (iv) the pest can be associated with the commodity and (v) the pest may have an impact and can pose a potential risk for the EU territory. Six species, the EU-quarantine pest Scirtothrips dorsalis, and the EU non-regulated pests Aonidiella orientalis, Milviscutulus mangiferae, Paracoccus marginatus, Pulvinaria psidii and Colletotrichum siamense fulfilled all relevant criteria and were selected for further evaluation. For these pests, the risk mitigation measures proposed in the technical dossier from Israel were evaluated taking into account the possible limiting factors. For these pests, an expert judgement is given on the likelihood of pest freedom taking into consideration the risk mitigation measures acting on the pest, including uncertainties associated with the assessment. The estimated degree of pest freedom varies among the pests evaluated, with S. dorsalis being the pest most frequently expected on the imported plants. The Expert Knowledge Elicitation indicated, with 95% certainty, that between 9,958 and 10,000 bags per 10,000 would be free of S. dorsalis.
| S-EPMC7421533 | biostudies-literature