Browse
Submit Data
Databases
API
Help

Dataset Information

42 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

FRET-Based Aptasensor for the Selective and Sensitive Detection of Lysozyme.

ABSTRACT: Lysozyme is a conserved antimicrobial enzyme and has been cited for its role in immune modulation. Increase in lysozyme concentration in body fluids is also regarded as an early warning of some diseases such as Alzheimer's, sarcoidosis, Crohn's disease, and breast cancer. Therefore, a method for a sensitive and selective detection of lysozyme can benefit many different areas of research. In this regard, several aptamers that are specific to lysozyme have been developed, but there is still a lack of a detection method that is sensitive, specific, and quantitative. In this work, we demonstrated a single-molecule fluorescence resonance energy transfer (smFRET)-based detection of lysozyme using an aptamer sensor (also called aptasensor) in which the binding of lysozyme triggers its conformational switch from a low-FRET to high-FRET state. Using this strategy, we demonstrated that the aptasensor is sensitive down to 2.3 picomoles (30 nM) of lysozyme with a dynamic range extending to ~2 µM and has little to no interference from similar biomolecules. The smFRET approach used here requires a dramatically small amount of aptasensor (~3000-fold less as compared to typical bulk fluorescence methods), and it is cost effective compared to enzymatic and antibody-based approaches. Additionally, the aptasensor can be readily regenerated in situ via a process called toehold mediated strand displacement (TMSD). The FRET-based aptasensing of lysozyme that we developed here could be implemented to detect other protein biomarkers by incorporating protein-specific aptamers without the need for changing fluorophore-labeled DNA strands.

SUBMITTER: Sapkota K

PROVIDER: S-EPMC7038949 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Cationic conjugated polymer-based FRET aptasensor for label-free and ultrasensitive ractopamine detection.

Project description:A label-free fluorescence resonance energy transfer (FRET) platform based on cationic conjugated polymers and aptamers for ultrasensitive and specific ractopamine detection was constructed. This method exhibited a wide linear range from 0.05 to 500 μM and a low limit of detection of 47 nM, which make it an attractive assay platform for foodborne doping.

| S-EPMC8987537 | biostudies-literature

A SERS aptasensor for sensitive and selective detection of bis(2-ethylhexyl) phthalate.

Project description:Bis(2-ethylhexyl) phthalate (DEHP) is an endocrine disruptor commonly present in plastic products, such as PVC tubes and water bottles. In this work, a surface enhanced Raman spectroscopy (SERS) based aptasensor was developed and utilized for rapid, easy, sensitive, and specific detection of trace DEHP. A DEHP aptamer was immobilized on magnetic particles. Raman reporter molecule conjugated silver nanoparticles were clustered and coated with silica to provide a stable SERS signal. The SERS silica particle was then functionalized with 1,2,4-benzenetricarboxylic acid 1,2-bis(2-ethylhexyl) ester to increase its affinity to the DEHP aptamer. In the presence of a sample with DEHP, the high-affinity SERS silica particle competes with the DEHP molecule to bind with the aptamer on the magnetic particle. By measuring the signal of free SERS silica particles in the supernatant after magnetic separation, the concentration of DEHP in the sample was quantitatively determined. The developed DEHP aptasensor had a detection range from 0.008 to 182 nM and a limit of detection (LOD) of 8 pM. The aptasensor also showed high selectivity when exposed to interferents with analogous structures. The aptasensor was successfully tested for the detection of DEHP spiked in tap water, bottled water, and a carbonate beverage. The developed SERS-based aptasensor provides a rapid, sensitive, and easy-to-use method for the quantitative detection of DEHP in environmental and food analysis.

| S-EPMC6823992 | biostudies-literature

Sensitive Detection of SARS-CoV-2 Using a SERS-Based Aptasensor.

Project description:We developed a new surface-enhanced Raman scattering (SERS)-based aptasensor platform capable of quantifying severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) lysates with a high sensitivity. In this study, a spike protein deoxyribonucleic acid (DNA) aptamer was used as a receptor, and a self-grown Au nanopopcorn surface was used as a SERS detection substrate for the sensible detection of SARS-CoV-2. A quantitative analysis of the SARS-CoV-2 lysate was performed by monitoring the change in the SERS peak intensity caused by the new binding between the aptamer DNA released from the Au nanopopcorn surface and the spike protein in the SARS-CoV-2 virion. This technique enables detecting SARS-CoV-2 with a limit of detection (LoD) of less than 10 PFU/mL within 15 min. The results of this study demonstrate the possibility of a clinical application that can dramatically improve the detection limit and accuracy of the currently commercialized SARS-CoV-2 immunodiagnostic kit.

| S-EPMC8171219 | biostudies-literature

A Polyamidoamine-Based Electrochemical Aptasensor for Sensitive Detection of Ochratoxin A.

Project description:Sensitive detection of ochratoxin A (OTA) is significant and essential because OTA may pose risks to human and animal health. Here, we developed an electrochemical aptasensor for OTA analysis using polyamidoamine (PAMAM) dendrimers as a signal amplifier. As a carrier, PAMAM has numerous primary amino groups that can be coupled with thiolated complementary strand DNA (cDNA), allowing it to recognize aptamers bound to the surface of horseradish peroxidase (HRP)-modified gold nanoparticles (AuNPs), thereby improving the sensitivity of the aptasensor. When monitoring the positive samples, OTA was captured by the aptamer fixed on the HRP-conjugated AuNP surface by specific recognition, after which the formed OTA-aptamer conjugates were detached from the electrode surface, ultimately decreasing the electrochemical signal monitored by differential pulse voltammetry. The novel aptasensor achieved a broad linear detection range from 5 to 105 ng L-1 with a low detection limit of 0.31 ng L-1. The proposed aptasensor was successfully applied for OTA analysis in red wine, with recovery rates ranging from 94.15 to 106%. Furthermore, the aptasensor also exhibited good specificity and storage stability. Therefore, the devised aptasensor represents a sensitive, practical and reliable tool for monitoring OTA in agricultural products, which can also be adapted to other mycotoxins.

| S-EPMC10669513 | biostudies-literature

Gold Nanoparticles dotted Reduction Graphene Oxide Nanocomposite Based Electrochemical Aptasensor for Selective, Rapid, Sensitive and Congener-Specific PCB77 Detection.

Project description:Gold nanoparticles (AuNP) dotted reduction graphene oxide (RGO-AuNP) is used as a platform for an aptamer biosensor to selectively detect 3,3'4,4'-polychlorinated biphenyls (PCB77). By anchoring aptamers onto the binding sites of RGO-AuNP and making use of the synergy effect of RGO and AuNP, the RGO-AuNP based biosensor exhibits superior analytical performances to AuNP based biosensor in terms of sensitivity and repeatability. The sensitivity of RGO-AuNP based aptamers (RGO-AuNP-Ap) biosensor (226.8 μA cm-2) is nearly two times higher than that of Au based biosensors (AuNP-Ap/Au electrode, 147.2 μA cm-2). The RGO-AuNP-Ap/Au biosensor demonstrated a linear response for PCB77 concentrations between 1 pg L-1 and 10 μg L-1, with a low limit of detection (LOD) of 0.1 pg L-1. The superb LOD satisfies the exposure thresholds (uncontaminated water < 0.1 ng L-1) set out by International Agency for Research on Cancer (IARC) and the Environmental Protection Agency (EPA). The proposed biosensor can be a powerful tool for rapid, sensitive and selective detection of PCBs on site.

| S-EPMC5507977 | biostudies-literature

Aptasensor for multiplex detection of antibiotics based on FRET strategy combined with aptamer/graphene oxide complex.

Project description:The development of a multiplexed sensing platform is necessary for highly selective, sensitive, and rapid screening of specific antibiotics. In this study, we designed a novel multiplex aptasensor for antibiotics by fluorescence resonance energy transfer (FRET) strategy using DNase I-assisted cyclic enzymatic signal amplification (CESA) method combined with aptamer/graphene oxide complex. The aptamers specific for sulfadimethoxine, kanamycin, and ampicillin were conjugated with Cyanine 3 (Cy3), 6-Carboxyfluorescein (FAM), and Cyanine 5 (Cy5), respectively, and graphene oxide (GO) was adopted to quench the fluorescence of the three different fluorophores with the efficiencies of 94.36%, 93.94%, and 96.97% for Cy3, FAM, and Cy5, respectively. CESA method was used for sensitive detection, resulting in a 2.1-fold increased signal compared to those of unamplified method. The aptasensor rapidly detected antibiotics in solution with limit of detection of 1.997, 2.664, and 2.337 ng/mL for sulfadimethoxine, kanamycin, and ampicillin, respectively. In addition, antibiotics dissolved in milk were efficiently detected with similar sensitivities. Multiplexed detection test proved that the fluorescently modified aptamers could work separately from each other. The results indicate that the aptasensor offers high specificity for each antibiotic and enables simultaneous and multicolor sensing for rapid screening of multiple antibiotics at the same time.

| S-EPMC6529438 | biostudies-literature

Highly sensitive detection of lipopolysaccharides using an aptasensor based on hybridization chain reaction.

Project description:Lipopolysaccharides (LPS), integral components of the outer membrane of all gram-negative bacteria, are closely associated with foodborne diseases such as fever, diarrhea and hypotension, and thus, the early and sensitive detection of LPS is necessary. In this study, an aptasensor assay based on hybridization chain reaction (HCR) was developed to detect LPS. Briefly, two complementary stable species of biotinylated DNA hairpins coexisted in solution until the introduction of a detection probe triggered a hybridization chain reaction cascade. The DNA conjugates specifically reacted with the LPS, which were captured by the ethanolamine aptamer attached to the reaction well surface. After optimizing the key reaction conditions, such as the reaction time of HCR, the amount of the capture probe and detection probes, the increase in the LPS concentration was readily measured by the optical density value, and a relatively low detection limit (1.73 ng/mL) was obtained, with a linear response range of 1-10(5 )ng/mL. The approach presented herein introduced the use of an aptasensor for LPS discrimination and HCR for signal amplification, offering a promising option for detecting LPS.

| S-EPMC4941573 | biostudies-literature

An off-on fluorescence aptasensor for trace thrombin detection based on FRET between CdS QDs and AuNPs.

Project description:An off-on fluorescence aptasensor was developed for trace thrombin detection based on fluorescence resonance energy transfer (FRET) between CdS QDs and gold nanoparticles (AuNPs). Using DNA pairwise hybridization of the aptamer to the complementary DNA (cDNA), the CdS QDs (energy donor) were tightly coupled to the AuNPs (energy acceptor), resulting in the occurrence of FRET and there was a dramatic fluorescence quenching of CdS QDs (turn off). When the thrombin was added to the fluorescence aptasensor, the specific binding of the aptamer to the target formed a G-quadruplex that caused the AuNPs receptor to detach and the DNA duplex to be disassembled. The process would inhibit the FRET which contribute to the recovery of fluorescence (turn on) and an "off-on" fluorescence aptasensor for thrombin detection was constructed accordingly. Under optimal conditions, the fluorescence recovery showed good linearity with the concentration of thrombin in the range of 1.35-54.0 nmol L-1, and the detection limit was 0.38 nmol L-1 (S/N = 3, n = 9). Importantly, the fluorescence aptasensor presented excellent specificity for thrombin, and was successfully applied to the quantitative determination of thrombin in real serum with satisfactory recoveries of 98.60-102.2%.

| S-EPMC9749934 | biostudies-literature

Highly sensitive detection of influenza virus with SERS aptasensor.

Project description:Highly sensitive and rapid technology of surface enhanced Raman scattering (SERS) was applied to create aptasensors for influenza virus detection. SERS achieves 106-109 times signal amplification, yielding excellent sensitivity, whereas aptamers to hemagglutinin provide a specific recognition of the influenza virus. Aptamer RHA0385 was demonstrated to have essentially broad strain-specificity toward both recombinant hemagglutinins and the whole viruses. To achieve high sensitivity, a sandwich of primary aptamers, influenza virus and secondary aptamers was assembled. Primary aptamers were attached to metal particles of a SERS substrate, and influenza viruses were captured and bound with secondary aptamers labelled with Raman-active molecules. The signal was affected by the concentration of both primary and secondary aptamers. The limit of detection was as low as 1 · 10-4 hemagglutination units per probe as tested for the H3N2 virus (A/England/42/72). Aptamer-based sensors provided recognition of various influenza viral strains, including H1, H3, and H5 hemagglutinin subtypes. Therefore, the aptasensors could be applied for fast and low-cost strain-independent determination of influenza viruses.

| S-EPMC6483365 | biostudies-literature

Sensitive Detection of SARS-CoV-2 Variants Using an Electrochemical Impedance Spectroscopy Based Aptasensor.

Project description:The global pandemic caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) caused a threat to public health and a worldwide crisis. This raised the need for quick, effective, and sensitive detection tools to prevent the rapid transmission rate of the infection. Therefore, this study aimed to develop an electrochemical impedance spectroscopy (EIS)-based aptasensor employing an interdigitated gold electrode (IDE) to detect SARS-CoV-2 Spike (S) glycoprotein and viral particles. This allowed us to sensitively detect SARS-CoV-2 S glycoprotein with a limit of detection (LOD) of 0.4 pg/mL in a buffer solution and to obtain a linear increase for concentrations between 0.2 to 0.8 pg/mL with high specificity. The proposed aptasensor also showed a good sensitivity towards the heat-inactivated SARS-CoV-2 variants in a buffer solution, where the Delta, Wuhan, and Alpha variants were captured at a viral titer of 6.45 ± 0.16 × 103 TCID50/mL, 6.20 × 104 TCID50/mL, and 5.32 ± 0.13 × 102 TCID50/mL, respectively. Furthermore, the detection of SARS-CoV-2 performed in a spiked human nasal fluid provided an LOD of 6.45 ± 0.16 × 103 TCID50/mL for the Delta variant in a 50 µL sample and a detection time of less than 25 min. Atomic force microscopy images complemented the EIS results in this study, revealing that the surface roughness of the IDE after each modification step increased, which indicates that the target was successfully captured. This label-free EIS-based aptasensor has promising potential for the rapid detection of SARS-CoV-2 in complex clinical samples.

| S-EPMC9656073 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data