Dataset Information

Finite element analysis of a one-piece zirconia implant in anterior single tooth implant applications.

ABSTRACT: This study evaluated the von Mises stress (MPa) and equivalent strain occurring around monolithic yttria-zirconia (Zir) implant using three clinically simulated finite element analysis (FEA) models for a missing maxillary central incisor. Two unidentified patients' cone-beam computed tomography (CBCT) datasets with and without right maxillary central incisor were used to create the FEA models. Three different FEA models were made with bone structures that represent a healed socket (HS), reduced bone width edentulous site (RB), and immediate extraction socket with graft (EG). A one-piece abutment-implant fixture mimicking Straumann Standard Plus tissue level RN 4.1 X 11.8mm, for titanium alloy (Ti) and Zir were modeled. 178 N oblique load and 200 N vertical load were used to simulate occlusal loading. Von Mises stress and equivalent strain values for around each implant model were measured. Within the HS and RB models the labial-cervical region in the cortical bone exhibited highest stress, with Zir having statistically significant lower stress-strain means than Ti in both labial and palatal aspects. For the EG model the labial-cervical area had no statistically significant difference between Ti and Zir; however, Zir performed better than Ti against the graft. FEA models suggest that Ti, a more elastic material than Zir, contributes to the transduction of more overall forces to the socket compared to Zir. Thus, compared to Ti implants, Zir implants may be less prone to peri-implant bone overloading and subsequent bone loss in high stress areas especially in the labial-cervical region of the cortical bone. Zir implants respond to occlusal loading differently than Ti implants. Zir implants may be more favorable in non-grafted edentulous or immediate extraction with grafting.

SUBMITTER: Talmazov G

PROVIDER: S-EPMC7039452 | biostudies-literature | 2020

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Finite element analysis of a one-piece zirconia implant in anterior single tooth implant applications.

Talmazov Georgi G Veilleux Nathan N Abdulmajeed Aous A Bencharit Sompop S

PloS one 20200224 2

This study evaluated the von Mises stress (MPa) and equivalent strain occurring around monolithic yttria-zirconia (Zir) implant using three clinically simulated finite element analysis (FEA) models for a missing maxillary central incisor. Two unidentified patients' cone-beam computed tomography (CBCT) datasets with and without right maxillary central incisor were used to create the FEA models. Three different FEA models were made with bone structures that represent a healed socket (HS), reduced ...[more]

PMID: 32092128

Similar Datasets

Project description:BackgroundOral implants have helped clinicians to improve the quality of life for many patients. The material of choice for dental implants currently remains titanium type IV, whose mechanical and biological properties have been proven throughout the history of implantology. Yet, this material is not exempt from complications. For these reasons, ceramic alternatives to titanium have emerged. Thus, the purpose of this study is to evaluate peri-implant hard and soft tissue stability with the use of a one-piece ceramic implant (Straumann® PURE Ceramic Implant) during 1 year of follow-up.Study designOne-piece all-ceramic zirconia (ZrO2) implants were placed to replace single missing teeth in the esthetic zone. Six to 8 weeks after the procedure, the definitive prosthesis was fabricated. At the time of prosthesis, placement (T0) photographs and periapical radiographs were taken, and the following clinical parameters were recorded: probing depth (PD), plaque index (PI), bleeding on probing (BOP), suppuration on probing (SOP), distance from gingival margin to incisal edge (GM-IE), and Jemt papilla index (JPI). Follow-up appointments were scheduled at 4 (T4), 8 (T8), and 12 (T12) months, when the same parameters were recorded. In addition, plaque control was reinforced and prophylaxis was carried out. In this last appointment, a final periapical radiograph was taken to assess marginal bone loss.ResultsA total of 32 zirconia implants were placed in 28 patients (16 women and 12 men, aged between 34 and 67 years). The survival and success rate were 96.9%. The increase in probing depth from baseline to 12 months was 0.78 mm. Assessments of plaque index and bleeding on probing showed a slight increase throughout the study.ConclusionsThe results obtained with the Straumann® PURE Ceramic implants show them to exhibit very good clinical behavior. The survival rate of the implants of our pilot study was 96.9%. For these reasons, we can say that zirconia implants could be an alternative to titanium implants in the esthetic zone.

Project description:BACKGROUND:Clinical studies regarding zirconia implant abutments reported good survival rates in the short-term observation period. The purpose of this study was to assess the six-year clinical performance of zirconia abutments supporting all-ceramic crowns in anterior and premolar regions. METHODS:The patients received zirconia implant abutments to support all-ceramic crowns in Chang-Gung Medical Center during the period August 2010 to August 2011 were enrolled. In the following six years of observation period after the implant-crown had finished, the clinical parameters of all of the included patients were registered on a special form. The records regarding the following variables: age, gender, implant location, the condition of edentulous site before implant placement, esthetic performance at baseline, presence or absence of technical complications, and biological outcomes were registered and scrutinized for evaluation. RESULTS:Out of the 32 zirconia implant abutments and 32 all-ceramic crowns that were followed for six years. Neither abutments nor crowns were lost, yielding 100% survival rates for both zirconia abutments and crowns. The esthetic outcomes were excellent except that a score of 2 was given to two restorations. With regard to technical complications, there was one instance of abutment screw loosening, two cases of veneering ceramic chipping, one restoration with occlusal roughness, and three instances of crowns loosening. Overall, the success rates were 96.8% and 81.2% for abutments and crowns respectively. In biological performance, only 1 implant was classified in group II (satisfactory survival) in the Misch classification, while all the others were classified in group I (excellent). CONCLUSIONS:Zirconia abutments supporting all-ceramic crowns demonstrated high survival rate, good biological and esthetic results. While some technical complications were frequently observed, the complication-free rates were 96.8% for abutments and 81.2% for crowns in the medium-term observation period.

Dataset Information

Finite element analysis of a one-piece zirconia implant in anterior single tooth implant applications.

Publications

Finite element analysis of a one-piece zirconia implant in anterior single tooth implant applications.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets