Dataset Information

Near-road Vehicle Emissions Air Quality Monitoring for Exposure Modeling.

ABSTRACT: Exposure to vehicular emissions has been linked to numerous adverse health effects. In response to the arising concerns, near-road monitoring is conducted to better characterize the impact of mobile source emissions on air quality and exposure in the near-road environment. An intensive measurement campaign measured traffic-related air pollutants (TRAPs) and related data (e.g., meteorology, traffic, regional air pollutant levels) in Atlanta, along one of the busiest highway corridors in the US. Given the complexity of the near-road environment, the study aimed to compare two near-road monitors, located in close proximity to each other, to assess how observed similarities and differences between measurements at these two sites inform the siting of other near-road monitoring stations. TRAP measurements, including carbon monoxide (CO) and nitrogen dioxide (NO2), are analyzed at two roadside monitors in Atlanta, GA located within 325m of each other. Both meteorological and traffic conditions were monitored to assess the temporal impact of these factors on traffic-related pollutant concentrations. The meteorological factors drove the diurnal variability of primary pollutant concentration more than traffic count. In spite of their proximity, while the CO and NO2 concentrations were correlated with similar diurnal variations, pollutant concentrations at the two closely sited monitors differed, likely due to the differences in the siting characteristics reducing the dispersion of the primary emissions out of the near-road environment. Overall, the near-road TRAP concentrations at all sites were not as elevated as seen in prior studies, supporting that decreased vehicle emissions have led to significant reductions in TRAP levels, even along major interstates. Further, the differences in the observed levels show that use of single near-road observations will not capture pollutant levels representative of the local near-road environment and that additional approaches (e.g., air quality models) are needed to characterize exposures.

SUBMITTER: Moutinho JL

PROVIDER: S-EPMC7080188 | biostudies-literature | 2020 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Near-road Vehicle Emissions Air Quality Monitoring for Exposure Modeling.

Moutinho Jennifer L JL Liang Donghai D Golan Rachel R Sarnat Stefanie E SE Weber Rodney R Sarnat Jeremy A JA Russell Armistead G AG

Atmospheric environment (Oxford, England : 1994) 20200131

Exposure to vehicular emissions has been linked to numerous adverse health effects. In response to the arising concerns, near-road monitoring is conducted to better characterize the impact of mobile source emissions on air quality and exposure in the near-road environment. An intensive measurement campaign measured traffic-related air pollutants (TRAPs) and related data (e.g., meteorology, traffic, regional air pollutant levels) in Atlanta, along one of the busiest highway corridors in the US. G ...[more]

PMID: 32189987

Similar Datasets

Project description:Roadside vegetation has been shown to impact downwind, near-road air quality, with some studies identifying reductions in air pollution concentrations and others indicating increases in pollutant levels when vegetation is present. These widely contradictory results have resulted in confusion regarding the capability of vegetative barriers to mitigate near-road air pollution, which numerous studies have associated with significant adverse human health effects. Roadside vegetation studies have investigated the impact of many different types and conditions of vegetation barriers and urban forests, including preserved, existing vegetation stands usually consisting of mixtures of trees and shrubs or plantings of individual trees. A study was conducted along a highway with differing vegetation characteristics to identify if and how the changing characteristics affected downwind air quality. The results indicated that roadside vegetation needed to be of sufficient height, thickness, and coverage to achieve downwind air pollutant reductions. A vegetation stand which was highly porous and contained large gaps within the stand structure had increased downwind pollutant concentrations. These field study results were consistent with other studies that the roadside vegetation could lead to reductions in average, downwind pollutant concentrations by as much as 50% when this vegetation was thick with no gaps or openings. However, the presence of highly porous vegetation with gaps resulted in similar or sometimes higher concentrations than measured in a clearing with no vegetation. The combination of air quality and meteorological measurements indicated that the vegetation affects downwind pollutant concentrations through attenuation of meteorological and vehicle-induced turbulence as air passes through the vegetation, enhanced mixing as portions of the traffic pollution plume are blocked and forced over the vegetation, and through particulate deposition onto leaf and branch surfaces. Computational fluid dynamic modeling highlighted that density of the vegetation barrier affects pollutant levels, with a leaf area density of 3.0 m2 m-3 or higher needed to ensure downwind pollutant reductions for airborne particulate matter. These results show that roadside bushes and trees can be preserved or planted along highways and other localized pollution sources to mitigate air quality and human health impacts near the source if the planting adheres to important characteristics of height, thickness, and density with full coverage from the ground to the top of the canopy. The results also highlight the importance of planting denser vegetation and maintaining the integrity and structure of these vegetation barriers to achieve pollution reductions and not contribute to unintended increases in downwind air pollutant concentrations.

Project description:Vehicles are a major source of anthropogenic emissions of carbon monoxide (CO), nitrogen oxides (NOx), and black carbon (BC). CO and NOx are known to be harmful to human health and contribute to ozone formation, while BC absorbs solar radiation that contributes to global warming and also has negative impacts on human health and visibility. Travel restrictions implemented during the COVID-19 pandemic provide researchers the opportunity to study the impact of large, on-road traffic reductions on local air quality. Traffic counts collected along Interstate-95, a major eight-lane highway in Maryland (US), reveal a 60% decrease in passenger car totals and an 8.6% (combination-unit) and 21% (single-unit) decrease in truck traffic counts in April 2020 relative to prior Aprils. The decrease in total on-road vehicles led to the near-elimination in stop-and-go traffic and a 14% increase in the mean vehicle speed during April 2020. Ambient near-road (NR) BC, CO, NOx, and carbon dioxide (CO2) measurements were used to determine vehicular emission ratios (ΔBC/ΔCO, ΔBC/ΔCO2, ΔNOx/ΔCO, ΔNOx/ΔCO2, and ΔCO/ΔCO2), with each ratio defined as the slope value of a linear regression performed on the concentrations of two pollutants within an hour. A decrease of up to a factor of two in ΔBC/ΔCO, ΔBC/ΔCO2, ΔNOx/ΔCO2, and in the fraction of on-road diesel vehicles from weekdays to weekends shows diesel vehicles to be the dominant source of BC and NOx emissions at this NR site. We estimate up to a 70% reduction in BC emissions in April 2020 compared to earlier years, and attribute much of this to lower diesel BC emissions resulting from improvements in traffic flow and fewer instances of acceleration and braking. Future efforts to reduce vehicular BC emissions should focus on improving traffic flow or turbocharger lag within diesel engines. Inferred BC emissions from the NR site also depend on ambient temperature, with an increase of 54% in ΔBC/ΔCO from -5 to 20 °C during the cold season, similar to previous studies that reported increasing BC emissions with rising temperature. The default setting of MOVES3, the current version of the mobile emission model used by the US EPA, does not adjust hot-running BC emissions for ambient temperature. Future work will focus on improving the accuracy of mobile emissions in air quality modeling by incorporating the effects of temperature and traffic flow in the system used to generate mobile emissions input for commonly used air quality models.

Dataset Information

Near-road Vehicle Emissions Air Quality Monitoring for Exposure Modeling.

Publications

Near-road Vehicle Emissions Air Quality Monitoring for Exposure Modeling.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets