Sewage Sludge ZnCl2-Activated Carbon Intercalated MgFe-LDH Nanocomposites: Insight of the Sorption Mechanism of Improved Removal of Phenol from Water.
Ontology highlight
ABSTRACT:
SUBMITTER: Mu'azu ND
PROVIDER: S-EPMC7084656 | biostudies-literature | 2020 Feb
REPOSITORIES: biostudies-literature
Publications
Sewage Sludge ZnCl<sub>2</sub>-Activated Carbon Intercalated MgFe-LDH Nanocomposites: Insight of the Sorption Mechanism of Improved Removal of Phenol from Water.
Mu'azu Nuhu Dalhat ND Zubair Mukarram M Jarrah Nabeel N Alagha Omar O Al-Harthi Mamdouh A MA Essa Mohammed H MH
International journal of molecular sciences 20200225 5
<b>Keywords</b>: sludge-activated carbon; MgFe layered double hydroxide; nanocomposite materials; phenol aqueous uptake; mechanistic studies; reusability performance. ...[more]
Similar Datasets
Project description:A novel approach was employed to load α-Fe2O3 and α-FeOOH onto sewage sludge biochar (SBC) with the purpose of efficient nickel (Ni) removal. A high Ni(II) adsorption capacity of 35.50 mg·g-1 in 100 ppm Ni(II) solution with 10 mg modified sewage sludge biochar (MSBC) was achieved. The adsorption kinetic and isotherm were fitted well by the pseudo-second-order model and the Langmuir model, respectively. The optimal pH was found around a neutral pH of 7. The adsorption mechanisms of Ni(II) onto MSBC were described as the synergistic effects of electrostatic attraction, ion exchange, inner-sphere complexation and co-precipitation. The initial rapid adsorption phenomenon could be attributed to electrostatic attraction and ion exchange, and then inner-sphere complexation and co-precipitation acted as a crucial role in the following step. The remarkable performance of MSBC provides an effective waste utilization approach to simultaneous sewage sludge recycle and Ni removal from aqueous solution.
| S-EPMC6561682 | biostudies-literature
Project description:This work evaluated the availability and sorption behaviour of four pharmaceuticals and eight of their metabolites in sewage sludge and sludge-amended soil. Digested sludge and compost were evaluated. The highest levels found in digested sludge corresponded to caffeine (up to 115 ng g-1 dm), ibuprofen (45 ng g-1 dm) and carbamazepine (9.3 ng g-1 dm). The concentrations measured in compost were even lower than in digested sludge. No compound was detected in sludge-amended soils. This fact could be due to the dilution effect after sludge application to soil. Different adsorption capacities in sludge-soil mixtures were measured for the studied compounds at the same spike concentration. In general, except for paraxanthine and 3-hydroxycarbamazepine, the metabolite concentrations measured in the mixtures were almost two-fold lower than those of their parent compounds, which can be explained by their mobility and lixiviation tendency. The log Kd ranged from -1.55 to 1.71 in sludge samples and from -0.29 to 1.18 in soil-sludge mixtures. The log Kd values calculated for compost were higher than those calculated for digested sludge. The obtained results implied that the higher organic carbon content of compost could influence soil contamination when it is applied to soil.
| S-EPMC8513156 | biostudies-literature
Project description:Understanding the sorption of pharmaceuticals to sewage sludge during waste water treatment processes is important for understanding their environmental fate and in risk assessments. The degree of sorption is defined by the sludge/water partition coefficient (Kd). Experimental Kd values (n=297) for active pharmaceutical ingredients (n=148) in primary and activated sludge were collected from literature. The compounds were classified by their charge at pH7.4 (44 uncharged, 60 positively and 28 negatively charged, and 16 zwitterions). Univariate models relating log Kd to log Kow for each charge class showed weak correlations (maximum R2=0.51 for positively charged) with no overall correlation for the combined dataset (R2=0.04). Weaker correlations were found when relating log Kd to log Dow. Three sets of molecular descriptors (Molecular Operating Environment, VolSurf and ParaSurf) encoding a range of physico-chemical properties were used to derive multivariate models using stepwise regression, partial least squares and Bayesian artificial neural networks (ANN). The best predictive performance was obtained with ANN, with R2=0.62-0.69 for these descriptors using the complete dataset. Use of more complex Vsurf and ParaSurf descriptors showed little improvement over Molecular Operating Environment descriptors. The most influential descriptors in the ANN models, identified by automatic relevance determination, highlighted the importance of hydrophobicity, charge and molecular shape effects in these sorbate-sorbent interactions. The heterogeneous nature of the different sewage sludges used to measure Kd limited the predictability of sorption from physico-chemical properties of the pharmaceuticals alone. Standardization of test materials for the measurement of Kd would improve comparability of data from different studies, in the long-term leading to better quality environmental risk assessments.
| S-EPMC5206221 | biostudies-literature
Project description:Understanding the removal mechanisms and kinetics of trace tetracycline by activated sludge is critical to both evaluation of tetracycline elimination in sewage treatment plants and risk assessment/management of tetracycline released to soil environment due to the application of biosolids as fertilizer. Adsorption is found to be the primary removal mechanism while biodegradation, volatilization, and hydrolysis can be ignored in this study. Adsorption kinetics was well described by pseudo-second-order model. Faster adsorption rate (k? = 2.04 × 10(-2)?g min(-1) ?g(-1)) and greater adsorption capacity (qe = 38.8 ?g g(-1)) were found in activated sludge treating freshwater sewage. Different adsorption rate and adsorption capacity resulted from chemical properties of sewage matrix rather than activated sludge surface characteristics. The decrease of tetracycline adsorption in saline sewage was mainly due to Mg(2+) which significantly reduced adsorption distribution coefficient (Kd) from 12,990 ± 260 to 4,690 ± 180 L kg(-1). Species-specific adsorption distribution coefficients followed the order of Kd???>>Kd???>Kd???. Contribution of zwitterionic tetracycline to the overall adsorption was >90 % in the actual pH range in aeration tank. Adsorption of tetracycline in a wide range of temperature (10 to 35 °C) followed the Freundlich adsorption isotherm well.
| S-EPMC3633786 | biostudies-literature
Project description:Bioretention, also known as rain garden, allows stormwater to soak into the ground through a soil-based medium, leading to removal of particulate and dissolved pollutants and reduced peak flows. Although soil organic matter (SOM) is efficient at sorbing many pollutants, amending the bioretention medium with highly effective adsorbents has been proposed to optimize pollutant removal and extend bioretention lifetime. The aim of this research was to investigate whether soil amended with activated carbon produced from sewage sludge increases the efficiency to remove hydrophobic organic compounds frequently detected in stormwater, compared to non-amended soil. Three lab-scale columns (520 cm3) were packed with soil (bulk density 1.22 g/cm3); activated carbon (0.5% w/w) was added to two of the columns. During 28 days, synthetic stormwater-ultrapure water spiked with seven hydrophobic organic pollutants and dissolved organic matter in the form of humic acids-was passed through the column beds using upward flow (45 mm/h). Pollutant concentrations in effluent water (collected every 12 h) and polluted soils, as well as desorbed amounts of pollutants from soils were determined using GC-MS. Compared to SOM, the activated carbon exhibited a significantly higher adsorption capacity for tested pollutants. The amended soil was most efficient for removing moderately hydrophobic compounds (log K ow 4.0-4.4): as little as 0.5% (w/w), carbon addition may extend bioretention medium lifetime by approximately 10-20 years before saturation of these pollutants occurs. The column tests also indicated that released SOM sorb onto activated carbon, which may lead to early saturation of sorption sites on the carbon surface. The desorption test revealed that the pollutants are generally strongly sorbed to the soil particles, indicating low bioavailability and limited biodegradation.
| S-EPMC5556136 | biostudies-literature
Project description:This experimental work focused on the synthesis, characterization, and testing of a unique, magnetically separable, and eco-friendly adsorbent composite material for the advanced treatment and efficient removal of nitrate and phosphate pollutants from wastewater. The MgAl-augmented double-layered hydroxide (Mg-Fe/LDH) intercalated with sludge-based activated carbon (SBAC-MgFe) composites were characterized by FT-IR, XRD, BET, VSM, SEM, and TEM techniques, revealing homogeneous and efficient dispersion of MgFe/LDH within the activated carbon (AC) matrix, a highly mesoporous structure, and superparamagnetic characteristics. The initial solution pH, adsorbent dose, contact time, and temperature parameters were optimized in order to reach the best removal performance for both pollutants. The maximum adsorption capacities of phosphate and nitrate were found to be 110 and 54.5 mg/g, respectively. The competition between phosphate and coexisting ions (Cl-, CO32-, and SO42-) was studied and found to be remarkably lower in comparison with the nitrate adsorption. The adsorption mechanisms were elucidated by kinetic, isotherm, thermodynamic modeling, and post-adsorption characterizations of the composite. Modeling and mechanistic studies demonstrated that physisorption processes such as electrostatic attraction and ion exchange mainly governed the nitrate and phosphate adsorption. The composite indicated an outstanding regeneration performance even after five sequences of adsorption/desorption cycles. The fabricated composite with magnetically separable characteristics can be used as a promising adsorbent for the removal of phosphate and nitrate pollutants from wastewater.
| S-EPMC7407415 | biostudies-literature
Project description:Considering the huge demands for economical and reliable eco-remediation applications, the goal of the present work is to synthesize cost-effective and functionally efficient magnetic layered nanocomposite adsorbents for the effective adsorption of dyes followed by easy separation from wastewater. This would ensure good reusability of adsorbents without altering its adsorption capacity in a relatively short time manner. To achieve this, different molecular weights of polyethylene glycol (PEG)-modified Fe3O4 combined with Mg-Al-layered double hydroxides (MAN-LDH) were synthesized and characterized using powder X-ray diffraction, Fourier transform infrared, scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis, differential thermal analysis, energy-dispersive X-ray, and inductively coupled plasma optical emission spectroscopy. The efficacy of various adsorption parameters for the removal of methyl orange (MO) from water using Fe3O4-PEG-Mg-Al-LDH (FPL) adsorbents with different molecular weights of PEG (2FPL, 4FPL, and 6FPL) were investigated, and the results were compared. The maximum adsorption capacities of 2FPL, 4FPL, and 6FPL for MO were found to be 775.19, 826.44, and 833.33 mg/g, respectively. Detailed adsorption studies confirm that the higher adsorption capacity of 6FPL is due to the fast exchange of anions (NO3 -) by MO in the interlayers of MAN-LDH, larger surface area, hydrogen bonding, and electrostatic interaction between adsorbate and adsorbent. The thermodynamic data indicate that the adsorption behavior is spontaneous and endothermic in nature. The reusability of all FPL adsorbents is observed to be excellent. The MAN-LDH recoated after the 31st-cycle nanocomposites show a recovery of 100% adsorption efficiency, similar to the freshly prepared 6FPL. Such systematic studies greatly help in advancing the applications of newly functionalized nanomaterials toward eco-remediation approaches.
| S-EPMC7045307 | biostudies-literature
Project description:In this study, date-palm biochar MgAl-augmented double-layered hydroxide (biochar-MgAl-LDH) nanocomposite was synthesized, characterized, and used for enhancing the removal of phosphate and nitrate pollutants from wastewater. The biochar-MgAl-LDH had higher selectivity and adsorption affinity towards phosphate compared to nitrate. The adsorption kinetics of both anions were better explained by the pseudo-first-order model with a faster removal rate to attain equilibrium in a shorter time, especially at lower initial phosphate-nitrate concentration. The maximum monolayer adsorption capacities of phosphate and nitrate by the non-linear Langmuir model were 177.97 mg/g and 28.06 mg/g, respectively. The coexistence of anions (Cl-, SO42-, NO3-, CO32- and HCO3-) negligibly affected the removal of phosphate due to its stronger bond on the nano-composites, while the presence of Cl- and PO43- reduced the nitrate removal attributed to the ions' participation in the active adsorption sites on the surface of biochar-MgAl-LDH. The excellent adsorptive performance is the main synergetic influence of the MgAl-LDH incorporation into the biochar. The regeneration tests confirmed that the biochar-MgAl composite can be restored effortlessly and has the prospective to be reused after several subsequent adsorption-desorption cycles. The biochar-LDH further demonstrated capabilities for higher removal of phosphate and nitrate from real wastewater.
| S-EPMC7075123 | biostudies-literature
Project description:Contamination with toxic metals prevents the use of sewage sludge (SS) as a soil fertilizer. Hydrodynamic cavitation, thermal microwaving, microwave-assisted alkaline, and acid hydrolysis coupled with ethylenediaminetetraacetate (EDTA) washing were tested as a method to remove toxic metals from SS. Acid hydrolysis coupled with EDTA washing was most effective and was used in a closed-loop process based on ReSoil technology. EDTA and process solutions were recycled at a pH gradient of 12.5-2, which was imposed by the addition of quicklime (CaO) and H2SO4. An average of 78%-Pb, 76%-Zn, 1%-Cu, and 17%-Cr were removed from SS in five consecutive batches. No wastewater was generated, only solid waste (40%). The EDTA lost in the process (42%) was resupplied in each batch. In a series of batches, the process solutions retained metal removal efficiency and quality. The treatment removed 70% and 23% of P and N, respectively, from SS and increased the leachability of Zn, Cu, Mn, and Fe in the washed SS by 11.7, 6.8, 1.4, and 5.2 times, respectively. Acid hydrolysis coupled with EDTA washing proved to be a technically feasible, closed-loop process but needs further development to reduce reagent, material, and nutrient loss and to reduce toxic emissions from the washed sludge.
| S-EPMC9916202 | biostudies-literature
Project description:In view of a simple after-use separation, the potentiality of producing magnetic activated carbon (MAC) by intercalation of ferromagnetic metal oxide nanoparticles in the framework of a powder activated carbon (PAC) produced from primary paper sludge was explored in this work. The synthesis conditions to produce cost effective and efficient MACs for the adsorptive removal of pharmaceuticals (amoxicillin, carbamazepine, and diclofenac) from aqueous media were evaluated. For this purpose, a fractional factorial design (FFD) was applied to assess the effect of the most significant variables (Fe3+ to Fe2+ salts ratio, PAC to iron salts ratio, temperature, and pH), on the following responses concerning the resulting MACs: Specific surface area (SBET), saturation magnetization (Ms), and adsorption percentage of amoxicillin, carbamazepine, and diclofenac. The statistical analysis revealed that the PAC to iron salts mass ratio was the main factor affecting the considered responses. A quadratic linear regression model A = f(SBET, Ms) was adjusted to the FFD data, allowing to differentiate four of the eighteen MACs produced. These MACs were distinguished by being easily recovered from aqueous phase using a permanent magnet (Ms of 22-27 emu g-1), and their high SBET (741-795 m2 g-1) were responsible for individual adsorption percentages ranging between 61% and 84% using small MAC doses (35 mg L-1).
| S-EPMC7911794 | biostudies-literature