Dataset Information

Effectiveness of vegetation and sound wall-vegetation combination barriers on pollution dispersion from freeways under early morning conditions.

ABSTRACT: Pollutants in tailpipe emissions can be highly elevated around roadways, and in early mornings the pollution plume can extend hundreds of meters into surrounding neighborhoods. Solid sound walls and vegetation barriers are commonly used to mitigate noise, but they also help mitigate near-road air pollution. Here we assess the effectiveness of barriers consisting of vegetation only and of a combination of vegetation and a solid sound wall (combination barrier) in reducing pollution concentrations downwind of roads, under stable atmospheric stability and calm to light wind conditions. Because there was no practical (no barrier) control site in the area, we primarily compare the two barrier types to each other and explore the importance of atmospheric conditions. Using measurements collected with a mobile platform, we develop concentration decay profiles of ultrafine and fine particles, oxides of nitrogen (NO and NO2) and carbon monoxide downwind of a freeway in California with different barrier configurations and meteorological conditions. Diurnally averaged data collected with passive samplers indicate that pollution from morning rush hour has about equal impact as the entire remainder of the day, because of differences in atmospheric dispersion as the day progresses. Under calm and stable atmospheric conditions (wind speed <0.6?m/s); a vegetation-only barrier was more effective than a combination barrier with a total height that was somewhat lower than the vegetation-only barrier, by 10-24% in the first 160?m downwind. Under light winds (above ~ 0.6 but below 3?m/s) and stable conditions, the combination barrier was more effective than the vegetation barrier alone, by 6-33%, in the first 160?m from the barrier. The average particle size downwind of the vegetation-only barrier was larger than downwind of the combination barrier, indicating that particle deposition plays an important role in the reductions observed downwind of vegetation. Our results are consistent with the notion that at low wind speeds, vegetation acts as an effective barrier. Overall, adding vegetation alone or to an existing solid barrier results in lower downwind pollution concentrations, especially under low wind speeds when concentrations can be high.

SUBMITTER: Ranasinghe D

PROVIDER: S-EPMC7092696 | biostudies-literature | 2019 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Effectiveness of vegetation and sound wall-vegetation combination barriers on pollution dispersion from freeways under early morning conditions.

Ranasinghe Dilhara D Lee Eon S ES Zhu Yifang Y Frausto-Vicencio Isis I Choi Wonsik W Sun Wu W Mara Steve S Seibt Ulrike U Paulson Suzanne E SE

The Science of the total environment 20181211

Pollutants in tailpipe emissions can be highly elevated around roadways, and in early mornings the pollution plume can extend hundreds of meters into surrounding neighborhoods. Solid sound walls and vegetation barriers are commonly used to mitigate noise, but they also help mitigate near-road air pollution. Here we assess the effectiveness of barriers consisting of vegetation only and of a combination of vegetation and a solid sound wall (combination barrier) in reducing pollution concentrations ...[more]

PMID: 30678013

Similar Datasets

Project description:Purpose:Nowadays, noise pollution is considered a major environmental problem which has affected the health and comfort of millions of people around the world. Solving the mentioned problems need to design a new generation of acoustic barriers. Acoustics experts believe that stopping and absorbing the low-frequency sound is difficult. The aims of this study were to remove the harmful frequency in industries and cities. This study concentrates on the reduction of the noise level and increasing the mass law and resonance at low frequencies. Methods:Sound measurement and frequency analysis did to fix the harmful frequency in the Shiraz city and in the Shiraz Gas Power Plant. COMSOL 5.3a software used for simulation. Suitable material chose for the manufacture of the sound barrier through the Cambridge engineering selection software 2013. The meta-material sound barrier made and tested in the acoustic room and in the free space. Results analyzed and optimized by Design of Experiment (DOE) and Response Surface Methodology (RSM) software. Mini Tab. 18.1 software used for Statistical Calculations. New sound barriers manufactured with adding new strategies to previous studies to improve the performance of meta-materials like beautification inspired from the flowers of nature and increasing of resonance in internal pipes. Results:Three mechanisms used in this scatterer model which included, resonance phenomenon, Band Gap (BG) without absorption mechanism and inner-fractal-like structure. Our technique showed an advantage to reduce at frequencies below 100 Hz without adsorbent usage. The results showed that reduced noise exposures about 17.8 dB at frequency 50 Hz, about 9.1 dB within the range of 250 Hz according to EN 1793-2 standard (Lab Test for Airborne Sound Insulation). The sound barrier reported in this work provides the best and updated solution in the field of noise control. Conclusions:A novel generation of sound barriers introduced. We called this structure Interior Quasi-Fractal Sonic Crystal Acoustic Barrier (IQFSCAB). In this study, several different gaps used to remove various frequencies. It could be concluded that the outcomes of the meta-material models based on the Sonic Crystal (SC) could be used for the purpose of noise control system and could be helpful for decision-makers on the noise control legislations. Graphical abstractInteraction of waves with noise barriers and wave propagation inside periodic media is a hot topic in many branches of science and technology. The acoustic metamaterial can create green environments by reducing the low frequencies of industrial noise or traffic jam. New barrier have added a number of new strategies to previous studies in order to improve the performance of meta-materials. Our technique shows a clear advantage over to absorb at frequencies below 100 Hz without adsorbent usage. Innovative use of several different gaps and diameters for to remove various frequencies was done in this study. We called this structure IQFSACB due to fractal like interior pipes as those seen in some of the flowers in nature.

Project description:BackgroundIndoor air pollution, including fine particulate matter (PM2.5) and carbon monoxide (CO), is a major risk factor for pneumonia and other respiratory diseases. Biomass-burning cookstoves are major contributors to PM2.5 and CO concentrations. However, high concentrations of PM2.5 (>?1000??g/m3) have been observed in homes in Dhaka, Bangladesh that do not burn biomass. We described dispersion of PM2.5 and CO from biomass burning into nearby homes in a low-income urban area of Dhaka, Bangladesh.MethodsWe recruited 10 clusters of homes, each with one biomass-burning (index) home, and 3-4 neighboring homes that used cleaner fuels with no other major sources of PM2.5 or CO. We administered a questionnaire and recorded physical features of all homes. Over 24?h, we recorded PM2.5 and CO concentrations inside each home, near each stove, and outside one neighbor home per cluster. During 8 of these 24?h, we conducted observations for pollutant-generating activities such as cooking. For each monitor, we calculated geometric mean PM2.5 concentrations at 5-6?am (baseline), during biomass burning times, during non-cooking times, and over 24?h. We used linear regressions to describe associations between monitor location and PM2.5 and CO concentrations.ResultsWe recruited a total of 44 homes across the 10 clusters. Geometric mean PM2.5 and CO concentrations for all monitors were lowest at baseline and highest during biomass burning. During biomass burning, linear regression showed a decreasing trend of geometric mean PM2.5 and CO concentrations from the biomass stove (326.3??g/m3, 12.3?ppm), to index home (322.7??g/m3, 11.2?ppm), neighbor homes sharing a wall with the index home (278.4??g/m3, 3.6?ppm), outdoors (154.2??g/m3, 0.7?ppm), then neighbor homes that do not share a wall with the index home (83.1??g/m3,0.2?ppm) (p?=?0.03 for PM2.5, p?=?0.006 for CO).ConclusionBiomass burning in one home can be a source of indoor air pollution for several homes. The impact of biomass burning on PM2.5 or CO is greatest in homes that share a wall with the biomass-burning home. Eliminating biomass burning in one home may improve air quality for several households in a community.

Project description:Green infrastructure (GI) in urban areas may be adopted as a passive control system to reduce air pollutant concentrations. However, current dispersion models offer limited modelling options to evaluate its impact on ambient pollutant concentrations. The scope of this review revolves around the following question: how can GI be considered in readily available dispersion models to allow evaluation of its impacts on pollutant concentrations and health risk assessment? We examined the published literature on the parameterisation of deposition velocities and datasets for both particulate matter and gaseous pollutants that are required for deposition schemes. We evaluated the limitations of different air pollution dispersion models at two spatial scales - microscale (i.e. 10-500?m) and macroscale (i.e. 5-100?km) - in considering the effects of GI on air pollutant concentrations and exposure alteration. We conclude that the deposition schemes that represent GI impacts in detail are complex, resource-intensive, and involve an abundant volume of input data. An appropriate handling of GI characteristics (such as aerodynamic effect, deposition of air pollutants and surface roughness) in dispersion models is necessary for understanding the mechanism of air pollutant concentrations simulation in presence of GI at different spatial scales. The impacts of GI on air pollutant concentrations and health risk assessment (e.g., mortality, morbidity) are partly explored. The i-Tree tool with the BenMap model has been used to estimate the health outcomes of annually-averaged air pollutant removed by deposition over GI canopies at the macroscale. However, studies relating air pollution health risk assessments due to GI-related changes in short-term exposure, via pollutant concentrations redistribution at the microscale and enhanced atmospheric pollutant dilution by increased surface roughness at the macroscale, along with deposition, are rare. Suitable treatments of all physical and chemical processes in coupled dispersion-deposition models and assessments against real-world scenarios are vital for health risk assessments.

Dataset Information

Effectiveness of vegetation and sound wall-vegetation combination barriers on pollution dispersion from freeways under early morning conditions.

Publications

Effectiveness of vegetation and sound wall-vegetation combination barriers on pollution dispersion from freeways under early morning conditions.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets