Dataset Information

The effect of a centralization procedure for extruded lateral meniscus on load distribution in porcine knee joints at different flexion angles.

ABSTRACT:

Background

Meniscal extrusion results in loss of the ability to resist hoop strain and biomechanical overload on the joint articular surface. A centralization technique has been developed to overcome these problems. In this study, we analyzed the biomechanics of the extruded and centralized lateral meniscus (LM) in porcine knee joints at different flexion angles.

Methods

Porcine knee joints (n?=?8) were set in the universal tester and each knee was tested under the following states: 1) intact; 2) extrusion-meniscal extrusion was created by resecting the posterior root of the LM and posterior synovial capsule; and 3) centralization-centralization was performed by two anchors inserted in the lateral tibial plateau. Deviation distance of the meniscus, contact pressure, and contact area in the anterior LM, middle LM, posterior LM, and the contact pressure of the tibial cartilage were evaluated with an axial compressive force of 200?N at knee flexion angles of 30°, 45°, 60°, and 90°.

Results

The deviation distance of LM significantly increased in extrusion but was restored to the intact status after centralization at all angles. Both the contact pressure and area significantly decreased in extrusion and were restored after centralization close to the intact status in the anterior and middle LM; in the posterior LM, however, decreased contact pressure and area were not restored after centralization. The contact pressure of the tibial cartilage increased significantly in extrusion but decreased close to the intact status after centralization.

Conclusions

This centralization procedure could reduce extrusion of the LM and restore the load-distributing function of the anterior-middle LM. However, the procedure itself could not restore hoop function in cases where the defect lies in the posterior LM.

SUBMITTER: Kubota R

PROVIDER: S-EPMC7126455 | biostudies-literature | 2020 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

The effect of a centralization procedure for extruded lateral meniscus on load distribution in porcine knee joints at different flexion angles.

Kubota Rei R Koga Hideyuki H Ozeki Nobutake N Matsuda Junpei J Kohno Yuji Y Mizuno Mitsuru M Katano Hisako H Sekiya Ichiro I

BMC musculoskeletal disorders 20200403 1

<h4>Background</h4>Meniscal extrusion results in loss of the ability to resist hoop strain and biomechanical overload on the joint articular surface. A centralization technique has been developed to overcome these problems. In this study, we analyzed the biomechanics of the extruded and centralized lateral meniscus (LM) in porcine knee joints at different flexion angles.<h4>Methods</h4>Porcine knee joints (n = 8) were set in the universal tester and each knee was tested under the following state ...[more]

PMID: 32245447

Similar Datasets

Project description:There are few studies investigate morphologic changes of knee meniscus in vivo mechanical loading and three-dimensions (3D) deformation and displacement of the whole meniscus between in vivo mechanical loading and unloading conditions are still unclear. To investigate the displacements and 3D morphological changes of the menisci under knee weight-bearing and early flexion conditions in healthy adults using a Magnetic Resonance Imaging (MRI)-compatible loading device (a 3.0 T MR imaging system) combined with a newly developed 3D comparison technique. Fifteen healthy volunteers were recruited in this cross-sectional observational study. Each subject underwent MRIs of their dominant right knee in eight different scanning conditions using a 3.0-T MRI scanner with a custom-made MRI-compatible loading device. The knee meniscus images were 3D reconstructed, and dimensional comparisons were made for each meniscal model with baseline (0°-unloaded model). The morphologic changes of the meniscal-anterior horn (AH), body (BD), and posterior horn (PH) regions were expressed as mean positive and negative deviations. The displacements were further investigated, and the meniscal extrusions of different subregions were measured. The morphologic changing patterns of human meniscus under loading and flexions were presented using 3D chromatic maps. The bilateral menisci were generally shifting laterally and posteriorly in most flexion angles and were changing medially and anteriorly under fully extended knee loading conditions. The mean deviations were more significant with loading at 0° of knee flexion, while the PH region in the lateral side changed further posteriorly with loading in 30° flexion. Most of the differences were not significant in other flexion angles between loading conditions. The extrusion of meniscus's medial body was greater in full extension compared to any other flexing angles. Mechanical loading can significantly deform the menisci in knee extension; however, this effect is limited during knee flexion. Current study can be used as a reference for the evaluations of the integrity in meniscal functions.

Dataset Information

The effect of a centralization procedure for extruded lateral meniscus on load distribution in porcine knee joints at different flexion angles.

Background

Methods

Results

Conclusions

Publications

The effect of a centralization procedure for extruded lateral meniscus on load distribution in porcine knee joints at different flexion angles.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets