Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Mechanical Properties of Solder-Jointed Copper Rods with Electrodeposited Sn-Zn Alloy Films.

ABSTRACT: Enforced solid solution type Sn-Zn alloy films were electrochemically synthesized on Cu substrate from an aqueous solution containing citric acid complexes. The electrodeposition behavior of Sn-Zn alloys was classified to a normal co-deposition type, in which electrochemically nobler Sn deposits preferentially compared to Zn. Electrodeposited Sn-Zn alloy films were composed of a non-equilibrium phase, like an enforced solid solution, which was not observed in an equilibrium phase diagram of an Sn-Zn binary alloy system. By applying a thermal annealing process at 150 °C for 10 minutes, a pure Zn phase was precipitated from an electrodeposited Sn-based solid solution phase with excessively dissolved Zn atoms. During the soldering process, intermetallic phases such as Cu3Sn and Cu5Zn8 were formed at the interface between an Sn-Zn alloy and Cu substrate. Tensile strength and fracture elongation of solder-jointed Cu rods with Sn-8 at.%Zn alloy films reached ca. 40 MPa and 12%, respectively.

SUBMITTER: Tsurusaki T

PROVIDER: S-EPMC7142963 | biostudies-literature | 2020 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Mechanical Properties of Solder-Jointed Copper Rods with Electrodeposited Sn-Zn Alloy Films.

Tsurusaki Tatsuya T Ohgai Takeshi T

Materials (Basel, Switzerland) 20200314 6

Enforced solid solution type Sn-Zn alloy films were electrochemically synthesized on Cu substrate from an aqueous solution containing citric acid complexes. The electrodeposition behavior of Sn-Zn alloys was classified to a normal co-deposition type, in which electrochemically nobler Sn deposits preferentially compared to Zn. Electrodeposited Sn-Zn alloy films were composed of a non-equilibrium phase, like an enforced solid solution, which was not observed in an equilibrium phase diagram of an S ...[more]

PMID: 32183363

Similar Datasets

Dataset of spark plasma sintering of Al-Zn-Sn alloy for soft solder application.

Project description:The conventional soft solder used in soldering electronic joints is made up of 63% Sn and 37% Pb. It has been established that Pb is harmful to the body. Therefore, there is an on-going research to find a replacement for Pb. Al-Zn-Sn alloy is considered here as a possible replacement for soft solder of Sn and Pb. Three compositions of the alloy (Al-7Zn-3Sn, Al-10Zn-5Sn, and Al-13Zn-7Sn) were sintered at the sintering temperatures of 300 °C and 350 °C (and the constant pressure of 40 MPa, time of 5 mins, a heating rate of 20 °C/mins). Temperature/displacement/time variation data during the sintering were collected. The three alloys were compared after sintering by checking their microstructure, their densities, their hardness, their porosity, and their tensile strengths. Results showed that Al-13Zn-7Sn sintered at 350 °C, 40 MPa, 5 mins, 20 °C/mins had the highest densification of 99.7%, the lowest porosity of 0.3%, least hardness and strength of 450.34 MPa and 147.84 MPa respectively.

| S-EPMC6506702 | biostudies-other

Effect of FeCoNiCrCu<sub>0.5</sub> High-entropy-alloy Substrate on Sn Grain Size in Sn-3.0Ag-0.5Cu Solder.

Project description:High-entropy alloys (HEAs) are well known for their excellent high-temperature stability, mechanical properties, and promising resistance against oxidation and corrosion. However, their low-temperature applications are rarely studied, particularly in electronic packaging. In this study, the interfacial reaction between a Sn-3.0Ag-0.5Cu solder and FeCoNiCrCu0.5 HEA substrate was investigated. (Cu0.76, Ni0.24)6Sn5 intermetallic compound was formed the substrate at the interface between the solder and the FeCoNiCrCu0.5 HEA substrate. The average Sn grain size on the HEA substrate was 246 ?m, which was considerably larger than that on a pure Cu substrate. The effect of the substrate on Sn grain size is due to the free energy required for the heterogeneous nucleation of Sn on the FeCoNiCrCu0.5 substrate.

| S-EPMC6403290 | biostudies-literature

Soldering Characteristics and Mechanical Properties of Sn-1.0Ag-0.5Cu Solder with Minor Aluminum Addition.

Project description:Driven by the trends towards miniaturization in lead free electronic products, researchers are putting immense efforts to improve the properties and reliabilities of Sn based solders. Recently, much interest has been shown on low silver (Ag) content solder SAC105 (Sn-1.0Ag-0.5Cu) because of economic reasons and improvement of impact resistance as compared to SAC305 (Sn-3.0Ag-0.5Cu. The present work investigates the effect of minor aluminum (Al) addition (0.1-0.5 wt.%) to SAC105 on the interfacial structure between solder and copper substrate during reflow. The addition of minor Al promoted formation of small, equiaxed Cu-Al particle, which are identified as Cu₃Al₂. Cu₃Al₂ resided at the near surface/edges of the solder and exhibited higher hardness and modulus. Results show that the minor addition of Al does not alter the morphology of the interfacial intermetallic compounds, but they substantially suppress the growth of the interfacial Cu₆Sn₅ intermetallic compound (IMC) after reflow. During isothermal aging, minor alloying Al has reduced the thickness of interfacial Cu₆Sn₅ IMC but has no significant effect on the thickness of Cu₃Sn. It is suggested that of atoms of Al exert their influence by hindering the flow of reacting species at the interface.

| S-EPMC5456867 | biostudies-other

Improved electrical and thermo-mechanical properties of a MWCNT/In-Sn-Bi composite solder reflowing on a flexible PET substrate.

Project description:Multi-walled carbon nanotube (MWCNT)/indium-tin-bismuth (In-Sn-Bi) composite nanostructures in which In-Sn-Bi nanoparticles have been penetrated by the MWCNT arrays were synthesized using a chemical reduction method. The incorporation of 0.6 wt% MWCNTs with high electrical conductivity into the In-based solder resulted in low minimum electrical resistivity (19.9 ± 1.0 µΩ·cm). Despite being reflowed at the relatively low temperature of 110 °C, the composite solder nanostructures were able to form mechanically stable solder bumps on a flexible polyethylene terephthalate (PET) substrate due to the MWCNT arrays with a high thermal conductivity of 3000 W/(m·K) and In-Sn-Bi nanoparticles with a low melting temperature of 98.2 °C. Notably, the composite solder bumps exhibited high flexibility (17.7% resistance increase over 1000 cycles of operation in a bending test) and strong adhesion strength (0.9 N average shear strength in a scratch test) on the plastic substrate because of the presence of mechanically flexible and strong MWCNTs dispersed within the solder matrix materials. These overall properties are due to the improved diffusivity of the composite solder nanostructures by the cover of the In-Sn-Bi nanoparticles along the MWCNT arrays and the network structure formation of the composite solder bumps.

| S-EPMC5653769 | biostudies-literature

La(5)Zn(2)Sn.

Project description:A single crystal of penta-lanthanum dizinc stannide, La(5)Zn(2)Sn, was obtained from the elements in a resistance furnace. It belongs to the Mo(5)SiB(2) structure type, which is a ternary ordered variant of the Cr(5)B(3) structure type. The space is filled by bicapped tetra-gonal anti-prisms from lanthanum atoms around tin atoms sharing their vertices. Zinc atoms fill voids between these bicapped tetra-gonal anti-prisms. All four atoms in the asymmetric unit reside on special positions with the following site symmetries: La1 (..m); La2 (4/m..); Zn (m.2m); Sn (422).

| S-EPMC3246910 | biostudies-literature

Effect of Hydroxyapatite on the Mechanical Properties and Corrosion Behavior of Mg-Zn-Y Alloy.

Project description:Mg-Zn-Y alloys with a long period stacking ordered (LPSO) phase are potential candidates for biodegradable implants; however, an unfavorable degradation rate has limited their applications. Hydroxyapatite (HA) has been shown to enhance the corrosion resistance of Mg alloys. In this study, Mg97Zn?Y?-0.5 wt% HA composite was synthesized and solution treated at 500 °C for 10 h. The corrosion behavior of the composite was studied by electrochemical and immersion tests, while the mechanical properties were investigated by a tensile test. Addition of HA particles improves the corrosion resistance of Mg97Zn?Y? alloy without sacrificing tensile strength. The improved corrosion resistance is due to the formation of a compact Ca-P surface layer and a decrease of the volume fraction of the LPSO phase, both resulting from the addition of HA. After solution-treatment, the corrosion resistance of the composite decreases. This is due to the formation of a more extended LPSO phase, which weakens its role as a corrosion barrier in protecting the Mg matrix.

| S-EPMC5578221 | biostudies-literature

In situ synchrotron study of electromigration induced grain rotations in Sn solder joints.

Project description:Here we report an in situ study of the early stage of microstructure evolution induced by electromigration in a Pb-free ?-Sn based solder joint by synchrotron polychromatic X-ray microdiffraction. With this technique, crystal orientation evolution is monitored at intragranular levels with high spatial and angular resolution. During the entire experiment, no crystal growth is detected, and rigid grain rotation is observed only in the two grains within the current crowding region, where high density and divergence of electric current occur. Theoretical calculation indicates that the trend of electrical resistance drop still holds under the present conditions in the grain with high electrical resistivity, while the other grain with low resistivity reorients to align its a-axis more parallel with the ones of its neighboring grains. A detailed study of dislocation densities and subgrain boundaries suggests that grain rotation in ?-Sn, unlike grain rotation in high melting temperature metals which undergo displacive deformation, is accomplished via diffusional process mainly, due to the high homologous temperature.

| S-EPMC4834559 | biostudies-literature

Effect of Isothermal Annealing on Sn Whisker Growth Behavior of Sn0.7Cu0.05Ni Solder Joint.

Project description:This paper presents an assessment of the effect of isothermal annealing of Sn whisker growth behavior on the surface of Sn0.7Cu0.05Ni solder joints using the hot-dip soldering technique. Sn0.7Cu and Sn0.7Cu0.05Ni solder joints with a similar solder coating thickness was aged up to 600 h in room temperature and annealed under 50 °C and 105 °C conditions. Through the observations, the significant outcome was the suppressing effect of Sn0.7Cu0.05Ni on Sn whisker growth in terms of density and length reduction. The fast atomic diffusion of isothermal annealing consequently reduced the stress gradient of Sn whisker growth on the Sn0.7Cu0.05Ni solder joint. It was also established that the smaller (Cu,Ni)6Sn5 grain size and stability characteristic of hexagonal η-Cu6Sn5 considerably contribute to the residual stress diminished in the (Cu,Ni)6Sn5 IMC interfacial layer and are able to suppress the growth of Sn whiskers on the Sn0.7Cu0.05Ni solder joint. The findings of this study provide environmental acceptance with the aim of suppressing Sn whisker growth and upsurging the reliability of the Sn0.7Cu0.05Ni solder joint at the electronic-device-operation temperature.

| S-EPMC10003934 | biostudies-literature

Reactions in Electrodeposited Cu/Sn and Cu/Ni/Sn Nanoscale Multilayers for Interconnects.

Project description:Miniaturization of electronic devices has led to the development of 3D IC packages which require ultra-small-scale interconnections. Such small interconnects can be completely converted into Cu-Sn based intermetallic compounds (IMCs) after reflow. In an effort to improve IMC based interconnects, an attempt is made to add Ni to Cu-Sn-based IMCs. Multilayer interconnects consisting of stacks of Cu/Sn/Cu/Sn/Cu or Cu/Ni/Sn/Ni/Sn/Cu/Ni/Sn/Ni/Cu with Ni = 35 nm, 70 nm, and 150 nm were electrodeposited sequentially using copper pyrophosphate, tin methanesulfonic, and nickel Watts baths, respectively. These multilayer interconnects were investigated under room temperature aging conditions and for solid-liquid reactions, where the samples were subjected to 250 °C reflow for 60 s and also 300 °C for 3600 s. The progress of the reaction in the multilayers was monitored by using X-ray Diffraction, Scanning Electron Microscope, and Energy dispersive X-ray Spectroscopy. FIB-milled samples were also prepared for investigation under room temperature aging conditions. Results show that by inserting a 70 nanometres thick Ni layer between copper and tin, premature reaction between Cu and Sn at room temperature can be avoided. During short reflow, the addition of Ni suppresses formation of Cu₃Sn IMC. With increasing Ni thickness, Cu consumption is decreased and Ni starts acting as a barrier layer. On the other hand, during long reflow, two types of IMC were found in the Cu/Ni/Sn samples which are the (Cu,Ni)₆Sn₅ and (Cu,Ni)₃Sn, respectively. Details of the reaction sequence and mechanisms are discussed.

| S-EPMC5456830 | biostudies-other

Reactive Infiltration and Microstructural Characteristics of Sn-V Active Solder Alloys on Porous Graphite.

Project description:In this work, the reactive wetting and infiltration behaviors of a newly designed Sn-V binary alloy were comprehensively explored on porous graphite for the first time. It was discovered that 0.5 wt.% addition of V can obviously improve the wettability of liquid Sn on porous graphite and the nominal V contents in Sn-V binary alloys has minor effects on the apparent contact angles wetted at 950 °C. Moreover, the V-containing Sn-V alloys were initiated to spread on porous graphite at ~650 °C and reached a quasi-equilibrium state at ~900 °C. Spreading kinetics of Sn-3V alloy on porous graphite well fitted in the classic product reaction controlled (PRC) model. However, our microstructural characterization demonstrated that, besides vanadium carbide formation, the adsorption of V element at the wetting three-phase contact line spontaneously contributed to the reactive spreading and infiltrating of Sn-V alloys on porous graphite. Meanwhile, the formation of continuous vanadium carbides could completely block the infiltration of Sn-V active solder alloy in porous graphite. Affected by the growth kinetics of vanadium carbides, the infiltration depth of Sn-V alloys in porous graphite decreased at increased isothermal wetting temperatures. This work is believed to provide implicative notions on the fabrication of graphite related materials and devices using novel V-containing bonding alloys.

| S-EPMC7178118 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data