Browse
Submit Data
Databases
API
Help

Dataset Information

14 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Improving Formation Conditions and Properties of hBN Nanosheets Through BaF2-assisted Polymer Derived Ceramics (PDCs) Technique.

ABSTRACT: Hexagonal boron nitrite (hBN) is an attractive material for many applications such as in electronics as a complement to graphene, in anti-oxidation coatings, light emitters, etc. However, the synthesis of high-quality hBN at cost-effective conditions is still a great challenge. Thus, this work reports on the synthesis of large-area and crystalline hBN nanosheets via the modified polymer derived ceramics (PDCs) process. The addition of both the BaF2 and Li3N, as melting-point reduction and crystallization agents, respectively, led to the production of hBN powders with excellent physicochemical properties at relatively low temperatures and atmospheric pressure conditions. For instance, XRD, Raman, and XPS data revealed improved crystallinity and quality at a decreased formation temperature of 1200 °C upon the addition of 5 wt% of BaF2. Moreover, morphological determination illustrated the formation of multi-layered nanocrystalline and well-defined shaped hBN powders with crystal sizes of 2.74-8.41 ± 0.71 µm in diameter. Despite the compromised thermal stability, as shown by the ease of oxidation at high temperatures, this work paves way for the production of large-scale and high-quality hBN crystals at a relatively low temperature and atmospheric pressure conditions.

SUBMITTER: Matsoso BJ

PROVIDER: S-EPMC7152994 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Phase Evolution, Filler-Matrix Interactions, and Piezoelectric Properties in Lead Zirconate Titanate (PZT)-Filled Polymer-Derived Ceramics (PDCs).

Project description:PZT-silsesquioxane-based 0-3 hybrid materials are prepared by mixing lead zirconate titanate (Pb(Zr,Ti)O3; PZT) powder with a [R-SiO3/2]n (R = H, CH3, CH=CH2, C6H5) silsequioxane preceramic polymer. A PZT load up to 55 vol.% can be reached in the final composite. The piezoelectric and mechanical properties are investigated as a function of the filler content and are compared with theoretical models and reference samples made of the pure preceramic polymer or PZT filler. The piezoelectric response of the composites, as expressed by the relative permittivity and the piezoelectric coefficients d33 and g33, increases with an increasing PZT content. The bending strength of the composites ranges between 15 MPa and 31 MPa without a clear correlation to the filler content. The thermal conductivity increases significantly from 0.14 W∙m-1∙K-1 for the pure polymer-derived ceramic (PDC) matrix to 0.30 W∙m-1∙K-1 for a sample containing 55 vol.% PZT filler. From X-ray diffraction experiments (XRD), specific interactions between the filler and matrix are observed; the crystallization of the PDC matrix in the presence of the PZT filler is inhibited; conversely, the PDC matrix results in a pronounced decomposition of the filler compared to the pure PZT material.

| S-EPMC7177491 | biostudies-literature

Efficient Preparation of Small-Sized Transition Metal Dichalcogenide Nanosheets by Polymer-Assisted Ball Milling.

Project description:Two-dimensional (2D) transition metal dichalcogenide nanosheets (TMDC NSs) have attracted growing interest due to their unique structure and properties. Although various methods have been developed to prepare TMDC NSs, there is still a great need for a novel strategy combining simplicity, generality, and high efficiency. In this study, we developed a novel polymer-assisted ball milling method for the efficient preparation of TMDC NSs with small sizes. The use of polymers can enhance the interaction of milling balls and TMDC materials, facilitate the exfoliation process, and prevent the exfoliated nanosheets from aggregating. The WSe2 NSs prepared by carboxymethyl cellulose sodium (CMC)-assisted ball milling have small lateral sizes (8~40 nm) with a high yield (~60%). The influence of the experimental conditions (polymer, milling time, and rotation speed) on the size and yield of the nanosheets was studied. Moreover, the present approach is also effective in producing other TMDC NSs, such as MoS2, WS2, and MoSe2. This study demonstrates that polymer-assisted ball milling is a simple, general, and effective method for the preparation of small-sized TMDC NSs.

| S-EPMC9694012 | biostudies-literature

Establishment of Transposase-assisted Low-input m6A Sequencing Technique

Project description:As the most abundant and best-characterized internal mRNA modification, N6-methyladenosine (m6A) emerges to play a critical regulatory role in wide range of physiological and pathological processes, including gametogenesis, neuronal development, obesity and tumorigenesis. Methylated RNA immunoprecipitation coupled with next-generation sequencing (MeRIP-seq) facilitates transcriptome-wide m6A profiling, also is the most widely used technique to understand the biological significance of m6A. However, it typically requires over 100 μg of total RNA or 107 cells as input materials, hampering its application in limited samples. Here, we develop tMeRIP-seq, a transposase assisted MeRIP-seq method to achieve m6A profiling using ultra-low amount of input RNA. By marrying Tn5 tagmentation to m6A-specific immunoprecipitation, tMeRIP-seq largely improves the efficiency of library construction and reduces the input materials to as little as 60 ng total RNA or 103 cells. We apply this method on a small droplet of human blood and recapitulate the m6A profile previously reported using conventional protocol. We find tMeRIP-seq is a convenient and powerful method to examine m6A in ultra-low input material, potentially providing m6A as a new layer of bio-marker for liquid biopsy.

2021-09-07 | GSE167307 | GEO

Graphene nanoplatelets as nanofillers in mesoporous silicon oxycarbide polymer derived ceramics.

Project description:Understanding the role of graphene in the thermal stability and pore morphology of polymer derived silicon oxycarbide is crucial for electrochemical energy storage and hydrogen storage applications. Here in this work, we report the synthesis of graphene nanoplatelets dispersed silicon oxycarbide ceramics by the polymer to ceramic synthesis route. Samples containing graphene and without graphene are subjected to different pyrolysis conditions and are characterized using FT-IR, XPS, Raman spectroscopy, XRD, FE-SEM, HR-TEM, and BET. The results show that the graphene dispersed in the ceramic has undergone structural distortions upon pyrolysis and resulted in the formation of nanoclusters of graphene and turbostratic graphene. The XRD results confirm that with the incorporation of higher wt.% of GNP there is resistance to crystallization even at an exceedingly high pyrolysis temperature. The pores are bimodal in nature with specific surface area ranging between 22 and 70 m2/g and are generated in-situ during the polymer to ceramic conversion. Our study confirms that upon adjusting the graphene content it is possible to tune the structure and pore morphology of the polymer derived ceramics as per the requirements.

| S-EPMC6281675 | biostudies-literature

Fibroblasts Mediate Ectopic Bone Formation of Calcium Phosphate Ceramics.

Project description:Heterogeneity of fibroblasts directly affects the outcome of tissue regeneration; however, whether bioactive ceramics regulate bone regeneration through fibroblasts is unclear. Ectopic bone formation model with biphasic calcium phosphate (BCP) implantation was used to investigate the temporal and spatial distribution of fibroblasts around ceramics. The effect of BCP on L929 fibroblasts was evaluated by EdU assay, transwell assay, and qRT-PCR. Further, the effect of its conditioned medium on osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) was confirmed by ALP staining. SEM and XRD results showed that BCP contained abundant micro- and macro-pores and consisted of hydrogen-apatite (HA) and β-tricalcium phosphate (β-TCP) phases. Subsequently, BCP implanted into mice muscle successfully induced osteoblasts and bone formation. Fibroblasts labelled by vimentin gathered around BCP at 7 days and peaked at 14 days post implantation. In vitro, BCP inhibited proliferation of L929 fibroblast but promoted its migration. Moreover, expression of Col1a1, Bmp2, and Igf1 in L929 treated by BCP increased significantly while expression of Tgfb1 and Acta did not change. ALP staining further showed conditioned media from L929 fibroblasts treated by BCP could enhance osteogenic differentiation of BMSCs. In conclusion, fibroblasts mediate ectopic bone formation of calcium phosphate ceramics.

| S-EPMC9000332 | biostudies-literature

Nanoscatterer-Assisted Fluorescence Amplification Technique.

Project description:Weak fluorescence signals, which are important in research and applications, are often masked by the background. Different amplification techniques are actively investigated. Here, a broadband, geometry-independent and flexible feedback scheme based on the random scattering of dielectric nanoparticles allows the amplification of a fluorescence signal by partial trapping of the radiation within the sample volume. Amplification of up to a factor of 40 is experimentally demonstrated in ultrapure water with dispersed TiO2 nanoparticles (30 to 50 nm in diameter) and fluorescein dye at 200 μmol concentration (pumped with 5 ns long, 3 mJ laser pulses at 490 nm). The measurements show a measurable reduction in linewidth at the emission peak, indicating that feedback-induced stimulated emission contributes to the large gain observed.

| S-EPMC10648225 | biostudies-literature

Amorphous Aluminosilicate Nanosheets as Universal Precursors for the Synthesis of Diverse Zeolite Nanosheets for Polymer-Cracking Reactions.

Project description:Zeolites catalyze some reactions in their molecular-sized pores, but large molecules can react only on their external surface. Zeolite-nanosheets (NSs) have been developed as catalysts for large molecules. The previously reported methods to synthesize zeolite-NSs are specialized for each zeolite type. Here we propose a new method to synthesize various zeolite-NSs from the same amorphous aluminosilicate NSs (AAS-NSs) as a universal precursor. We successfully synthesized the unprecedented AAS-NSs in the hydrophilic space of the stable hyperswollen lyotropic lamellar (HL) phase. The four zeolite types could be obtained from the single-species AAS-NSs. These results imply that this method enables us to synthesize almost all types of zeolite-NSs. Moreover, the synthesized CHA-NSs have great potential for various applications because of their thickness and large external surface area.

| S-EPMC9828233 | biostudies-literature

The "cello technique": a new technique for ultrasound-assisted calcaneoplasty.

Project description:The "cello technique" is a new calcaneoplasty technique for the treatment of Haglund disease. It is an ultrasound-assisted technique for resection of the posterosuperior part of the calcaneus. It is possible to resect the posterosuperior part of the calcaneus under direct ultrasound control with the patient in the prone position, with a dorsally positioned ultrasound probe, in line with the Achilles tendon fibers (sagittal line), and with the abrader in the posteromedial working portal. We describe in detail the technique for this new procedure in foot and ankle surgery. This innovative technique offers the possibility of expanding the indications for ultrasound-guided surgery in other fields of orthopaedic surgery.

| S-EPMC3678620 | biostudies-literature

New Generation of Moire Superlattices in Doubly Aligned hBN/Graphene/hBN Heterostructures.

Project description:The specific rotational alignment of two-dimensional lattices results in a moiré superlattice with a larger period than the original lattices and allows one to engineer the electronic band structure of such materials. So far, transport signatures of such superlattices have been reported for graphene/hBN and graphene/graphene systems. Here we report moiré superlattices in fully hBN encapsulated graphene with both the top and the bottom hBN aligned to the graphene. In the graphene, two different moiré superlattices form with the top and the bottom hBN, respectively. The overlay of the two superlattices can result in a third superlattice with a period larger than the maximum period (14 nm) in the graphene/hBN system, which we explain in a simple model. This new type of band structure engineering allows one to artificially create an even wider spectrum of electronic properties in two-dimensional materials.

| S-EPMC6463240 | biostudies-literature

Full Polymer Dielectric Elastomeric Actuators (DEA) Functionalised with Carbon Nanotubes and High-K Ceramics.

Project description:Dielectric elastomer actuators (DEA) are special devices which have a simple working and construction principle and outstanding actuation properties. The DEAs consist of a combination of different materials for the dielectric and electrode layers. The combination of these layers causes incompatibilities in their interconnections. Dramatic differences in the mechanical properties and bad adhesion of the layers are the principal causes for the reduction of the actuation displacement and strong reduction of lifetime. Common DEAs achieve actuation displacements of 2% and a durability of some million cycles. The following investigations represent a new approach to solving the problems of common systems. The investigated DEA consists of only one basic raw polymer, which was modified according to the required demands of each layer. The basic raw polymer was modified with single-walled carbon nanotubes or high-k ceramics, for example, lead magnesium niobate-lead titanate. The development of the full polymer DEA comprised the development of materials and technologies to realise a reproducible layer composition. It was proven that the full polymer actuator worked according to the theoretical rules. The investigated system achieved actuation displacements above 20% regarding thickness, outstanding interconnections at each layer without any failures, and durability above 3 million cycles without any indication of an impending malfunction.

| S-EPMC6189977 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data