Browse
Submit Data
Databases
API
Help

Dataset Information

34 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Electrical resistivity tomography (ERT) data for clay mineral mapping.

ABSTRACT: In order to identify potential zones for clay mineral (kaolinite) in Ranong province, Thailand, ten 2D ERT survey lines were deployed across potential site. The data were collected using the IRIS Syscal Pro Plus multi-electrode imaging system with internal switchbox and an array of 48 steel electrodes. The Dipole-Dipole configuration was utilized with electrode separations of 10 m. The Res2DInv software was used to process the data. Images for the resistivity survey are presented as 2D cross section of resistivity profile. The data were interpreted by comparing with geology of the area and based on the available lithological borehole information.

SUBMITTER: Arjwech R

PROVIDER: S-EPMC7163305 | biostudies-literature | 2020 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Electrical resistivity tomography (ERT) data for clay mineral mapping.

Arjwech Rungroj R Sriwangpon Pakawat P Somchat Kittipong K Pondthai Potpreecha P Everett Mark M

Data in brief 20200408

In order to identify potential zones for clay mineral (kaolinite) in Ranong province, Thailand, ten 2D ERT survey lines were deployed across potential site. The data were collected using the IRIS Syscal Pro Plus multi-electrode imaging system with internal switchbox and an array of 48 steel electrodes. The Dipole-Dipole configuration was utilized with electrode separations of 10 m. The Res2DInv software was used to process the data. Images for the resistivity survey are presented as 2D cross sec ...[more]

PMID: 32322627

Similar Datasets

Electrical resistivity tomography data across the Hockai Fault Zone (Ardenne, Belgium).

Project description:In this work, we present the result of a large-scale geophysical survey that had the objective of identifying the subsurface characteristics and the NE-SW extension of the Hockai Fault Zone: a major NNW-SSE oriented crustal-rooted fault zone crossing the Stavelot-Venn Massif (Eastern Belgium). 31 two-dimensional electrical resistivity tomography (ERT) profiles are presented, resulting in 10,679 m of 2D sections. All profiles were acquired between 2008 and 2010 using a single channel ABEM Terrameter SAS1000 instrument connected to a 64 electrodes setup of maximum 315 m extent which was often extended using the roll-along technique. Major findings based on the data presented here are reported in the manuscript "A geophysical cross-section of the Hockai Fault Zone (Eastern Belgium)" (Lecocq and Camelbeeck, Submitted for publication) [1].

| S-EPMC5220259 | biostudies-literature

Hydrogeophysical monitoring of intense rainfall infiltration in the karst critical zone: A unique electrical resistivity tomography data set.

Project description:The common hydrogeological concepts assume that water mostly enters and flows in fractured and karstified media through preferential pathways related to discontinuities. But it is difficult to locate discontinuities and even more to relate those to possible or effective water routes, particularly when soil or scree covers near surface features. When and where does water flow underground? How fast? Are we able to monitor the infiltration processes? A unique large scale Electrical Resistivity Tomography (ERT) surface based time-lapse experiment was carried out in fractured and karstified carbonate rock during a typical Mediterranean autumn rainy episode (230mm of rain over 17 days). 120 ERT time-lapse sections were measured over the same profile during and after this event (30 days). The gradient array was chosen for his robustness and rapidity. The site is covered by typical Mediterranean forest and is a good example of the surface conditions found in Mediterranean karst. There is no major karstification features (i.e. cave, sinkhole) or major tectonic accident (i.e. fault). In a previous paper, several commercial and research inversion software were tested on this dataset. This processing highlighted some limitations in inversion process. At the actual stage, apparent resistivity data provides insight about recharge/discharge processes that are almost valuable as the inverted resistivity results. Due to his quality, the availability of this unique dataset acquired under natural conditions will allow to the scientific and engineer community exploring advances and limits of ERT approach and to test new software or new data processing strategy.

| S-EPMC8741474 | biostudies-literature

Electrical resistivity tomography combined with seismic data estimates heterogeneous distribution of near-seafloor concentrated gas hydrates within gas chimneys.

Project description:Near-seafloor concentrated gas hydrates (GHs) containing large amounts of methane have been identified at various gas chimney sites. Although understanding the spatial distribution of GHs is fundamental for assessing their dissociation impact on aggravating global warming and resource potential, the spatial distribution of GHs within gas chimneys remains unclear. Here, we estimate the subseafloor distribution of GHs at a gas chimney site in the Japan Sea using marine electrical resistivity tomography data. The resulting two-dimensional subseafloor resistivity structure shows high anomalies (10-100 Ωm) within seismically inferred gas chimneys. As the resistivity anomalies are aligned with high amplitude seismic reflections and core positions recovering GHs, we interpret the resistivity anomalies are near-seafloor concentrated GH deposits. We also detect various distribution patterns of the high resistivity anomalies including 100-m wide and 40-m thick anomaly near the seafloor and 500-m wide anomaly buried 50 m below the seafloor, suggesting that GHs are heterogeneously distributed. Therefore, considering such heterogeneous GH distribution within gas chimneys is critical for in-depth assessments of GH environmental impacts and energy resources.

| S-EPMC11217437 | biostudies-literature

Electrical resistivity survey data for potential aquifer in Banggi Island, Sabah, Malaysia.

Project description:The survey data on potential aquifer was collected at two sites located in Banggi Island (i.e. Laksian Primary School [LPS] and Padang Primary School [PPS]), Malaysia on 25 and 26 April 2013. Both locations are geologically surrounded by various types of lithologies, namely, sandstone, mudstone, siltstone, shale, chert, conglomerate, lignite, tuff, limestone, terrace sand, gravel and coral. The resistivity data consisted of six-line pole-dipole short arrays and were recorded in-situ using SAS 4000 ABEM Lund Imaging System, together with a relay switching unit (Electrode Selector ES 464), six multiconductor cables, steel rod electrodes and jumpers. The data, namely electrode spacing, depth of investigation, subsurface resistivity, type of material and horizontal data coverage were used to assess the characteristics of the potential aquifer. The recorded data were then processed using RES2DINV software to obtain 2-D inversion model of the subsurface. The data were also equipped with six models of inverse resistivity section for both areas. The data obtained can be used by the government and stakeholders for groundwater exploration and extraction in order to provide water supplies for local communities, especially since access to these resources from the surrounding water treatment plants on the island is limited.

| S-EPMC7452430 | biostudies-literature

Electrical resistivity imaging data for hydrogeological and geological hazard investigations in Taiwan.

Project description:This data article presents electrical resistivity imaging (ERI) data and inverted models with the objectives of hydrogeological characterization, land subsidence studies, and geological structural detections in Taiwan. The ERI data for hydrogeological studies includes 5 ERI profiles from Changhua, 33 from Yunlin, 36 from Yilan, 23 from Taichung, 23 from Chiayi and Tainan, and 23 from Taipei basins. In addition, time-lapse ERI profiles are presented for 10 ERI from Yilan, 10 ERI from Pingtung, 11 ERI from Taichung, and 31 ERI from Minzu basins. Moreover, 10 ERI data were used to detect the Rusui Fault, 12 for the Qishan Fault, 13 for the Yuli Fault, and 25 for the Shanyi Fault. This data article contains 265 ERI profiles with a total survey length of 59,905 m. A single ERI profile contains hundreds to thousands of subsurface apparent resistivity data points. The data was collected between 2010 and 2022 from different regions of Taiwan. The main findings from the ERI data consisted here were reported by Lin et al. [1] for the Pingtung basin, Chang et al. [2] for the Minzu basin, and Jordi et al. [3] for the Taichung basin in order to estimate hydraulic parameters and characterize the aquifer systems. The ERI data presented here can be used for a variety of hydrogeological, geological, engineering, and environmental applications, and it can be further interpreted using machine learning and statistical methods. Therefore, the ERI data will helps in various subsurface applications, academic research, and educational purposes.

| S-EPMC10439298 | biostudies-literature

Data for the potential gold mineralization mapping with the applications of Electrical Resistivity Imaging and Induced Polarization geophysical surveys.

Project description:To identify the potential zones for gold mineralization at the Felda Chiku 3, Gua Musang, Kelantan, East coast Malaysia, twenty-one (21) geophysical survey lines were conducted at the proposed mineral exploration site using the pole - dipole of the electrical resistivity and induced polarization arrays to get the maximum depth of 150?m with 400?m survey length. From the resistivity and chargeability concentration maps, the potential mineralized zones as delineated, was observed to be dominantly concentrated towards the southwest and northern part of the area. The 3D resistivity and chargeability slice model present low resistivity values and high chargeability values that are well correlated which is palpable especially at the depths of 25?m and 50?m respectively. The data showed that the potential mineralized zones are trending approximately north-south directions. Forty (40) drilling locations were proposed for follow-up drilling based on the resistivity and chargeability models.

| S-EPMC6362863 | biostudies-other

Insights into trunks of <i>Pinus cembra</i> L.: analyses of hydraulics via electrical resistivity tomography.

Project description:Key messageThe lack of elevational changes in electrical resistivity in Pinus cembra trunks indicated consistent growth and hydraulics across elevations. Though, electrical resistivity tomograms exhibited pronounced temperature-driven seasonal changes.AbstractAlpine conifers growing at high elevation are exposed to low temperatures, which may limit xylogenesis and cause pronounced seasonal changes in tree hydraulics. Electrical resistivity (ER) tomography enables minimal invasive monitoring of stems in situ. We used this technique to analyze Pinus cembra trunks along a 400 m elevational gradient up to the timberline and over seasons. Furthermore, ER data of earlywood across tree rings were compared with the respective specific hydraulic conductivity (K S), measured on extracted wood cores. ER tomograms revealed pronounced changes over the year and a strong correlation between average ER (ERmean) and air and xylem temperatures. Surprisingly, no elevational changes in ERmean, earlywood ER or K S were observed. ER data corresponded to variation in earlywood K S, which decreased from the youngest (ca. 4-5 cm2s-1 MPa-1) to the oldest tree rings (0.63 ± 0.22 cm2s-1 MPa-1). The lack of changes in ER data and earlywood K S along the study transect indicated consistent growth patterns and no major changes in structural and functional hydraulic traits across elevation. The constant decrease in earlywood K S with tree ring age throughout all elevations highlights the hydraulic relevance of the outermost tree rings in P. cembra. Seasonal measurements demonstrated pronounced temperature effects on ER, and we thus recommend a detailed monitoring of trunk temperatures for ER tomography.

| S-EPMC7437670 | biostudies-literature

Deep Electrical Resistivity Tomography for a 3D picture of the most active sector of Campi Flegrei caldera.

Project description:The central sector of the Campi Flegrei volcano, including the Solfatara maar and Pisciarelli fumarole field, is currently the most active area of the caldera as regards seismicity and gaseous emissions and it plays a significant role in the ongoing unrest. However, a general volcano-tectonic reconstruction of the entire sector is still missing. This work aims to depict, for the first time, the architecture of the area through the application of deep Electrical Resistivity Tomography. We reconstructed a three-dimensional resistivity model for the entire sector. Results provide useful elements to understand the present state of the system and the possible evolution of the volcanic activity and shed solid bases for any attempt to develop physical-mathematical models investigating the ongoing phenomena.

| S-EPMC6805934 | biostudies-literature

A multiscale accuracy assessment of moisture content predictions using time-lapse electrical resistivity tomography in mine tailings.

Project description:Accurate and large-scale assessment of volumetric water content (VWC) plays a critical role in mining waste monitoring to mitigate potential geotechnical and environmental risks. In recent years, time-lapse electrical resistivity tomography (TL-ERT) has emerged as a promising monitoring approach that can be used in combination with traditional invasive and point-measurements techniques to estimate VWC in mine tailings. Moreover, the bulk electrical conductivity (EC) imaged using TL-ERT can be converted into VWC in the field using petrophysical relationships calibrated in the laboratory. This study is the first to assess the scale effect on the accuracy of ERT-predicted VWC in tailings. Simultaneous and co-located monitoring of bulk EC and VWC are carried out in tailings at five different scales, in the laboratory and in the field. The hydrogeophysical datasets are used to calibrate a petrophysical model used to predict VWC from TL-ERT data. Overall, the accuracy of ERT-predicted VWC is [Formula: see text], and the petrophysical models determined at sample-scale in the laboratory remain valid at larger scales. Notably, the impact of temperature and pore water EC evolution plays a major role in VWC predictions at the field scale (tenfold reduction of accuracy) and, therefore, must be properly taken into account during the TL-ERT data processing using complementary hydrogeological sensors. Based on these results, we suggest that future studies using TL-ERT to predict VWC in mine tailings could use sample-scale laboratory apparatus similar to the electrical resistivity Tempe cell presented here to calibrate petrophysical models and carefully upscale them to field applications.

| S-EPMC10684595 | biostudies-literature

Electrical resistivity imaging (ERI) data for characterising crystalline basement structures in Abeokuta, southwestern Nigeria.

Project description:This article consists of data sets for five (5) traverses of 2D electrical resistivity imaging (ERI) collected in Abeokuta, southwestern Nigeria. ABEM Terrameter (SAS1000/4000) system and dipole-dipole array were used for the data collection. RES2DINV computer program was used to invert the observed apparent resistivity data to obtain 2D inverse model images of resistivity distribution of the subsurface. The 2D resistivity images were used to characterise the subsurface and delineate the crystalline basement features of hydrological importance in the area.

| S-EPMC6141815 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data