Dataset Information

Hazardous Waste Management of Buffing Dust Collagen.

ABSTRACT: Buffing Dust Collagen (BDC) is a hazardous waste product of chromium tanning bovine hides. The aim of this study was to investigate whether BDC has the desirable properties required of modern fillers. The microstructural properties of BDC were characterized by elemental analysis (N, Cr₂O₃) of dry residue and scanning electron microscopy (SEM). The BDC was applied (5 to 30 parts by weight) to styrene butadiene rubber (SBR), obtaining SBR-BDC composites. The physicochemical properties of the SBR-BDC composites were examined by Fourier transform infrared analysis, SEM, UV-Vis spectroscopy, swelling tests, mechanical tests, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The biodegradability of the SBR-BDC composites and their thermo-oxidative aging were also investigated. The filler contributed to increase the cross-link density in the elastomer structure, as evidenced by enhanced mechanical strength. The introduction of a filler into the elastomer structure resulted in an increase in the efficiency of polymer bonding, which was manifested by more favorable rheological and mechanical parameters. It also influenced the formation of stable interfacial bonds between the individual components in the polymer matrix, which in turn reduced the release of compact chromium in the BDC filler. This was shown by the absorption bands for polar groups in the infrared analysis and by imaging of the vulcanization process.

SUBMITTER: Prochon M

PROVIDER: S-EPMC7177460 | biostudies-literature | 2020 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Hazardous Waste Management of Buffing Dust Collagen.

Prochon Miroslawa M Marzec Anna A Dzeikala Oleksandra O

Materials (Basel, Switzerland) 20200325 7

Buffing Dust Collagen (BDC) is a hazardous waste product of chromium tanning bovine hides. The aim of this study was to investigate whether BDC has the desirable properties required of modern fillers. The microstructural properties of BDC were characterized by elemental analysis (N, Cr2O3) of dry residue and scanning electron microscopy (SEM). The BDC was applied (5 to 30 parts by weight) to styrene butadiene rubber (SBR), obtaining SBR-BDC composites. The physicoche ...[more]

PMID: 32218288

Similar Datasets

Project description:Electronic waste (e-waste) contains a variety of electronic components e.g., metals, non-metals, plastics, cables, etc. The excessive generation of e-waste has become a significant concern in the last few decades. The current global e-waste generation is 57.4 million metric tons (MMT) per year. Asia produces the highest amount of e-waste (24.9 MMT) followed by America, Europe, Africa, and Oceania. In Bangladesh, e-waste produces from two sources: its own consumption of electronic devices, which is 0.6 MMT, and imported e-waste from ship breaking yards that is 2.5 MMT in 2021. However, inadequate information on the current state of e-waste generation and management systems in Bangladesh has created a void to establish the future direction for proper handling of e-waste. In this work, the Bangladesh perspective of e-waste has been analyzed. The environmental, health economical forfeiture of e-waste has been discussed. The development of government legislations regarding e-waste have been stated. The establishment of e-waste management has been designed by the life cycle assessment (LCA) and material flow analysis (MFA) models. Moreover, a holistic approach for understanding the possible hazards, the economic feasibility of e-waste processing and viable management models for e-waste in Bangladesh was endeavored in this work to propose systematic future directions and recommendations to improve the current e-waste scenario of Bangladesh. Graphical abstract Image 1 Highlights • Collection, recycling, and disposal processes have to be established in Bangladesh.• E-waste generation in Bangladesh is 3.1 MMT including shipbreaking yards generation.• Bangladesh has an e-waste business potential of 221 million USD/yr.• The policies and legislations for e-waste management in Bangladesh are not adequate.• A combined MFA and LCA model can help decision-making for e-waste management. e-waste generation; e-waste management; Health hazards; Material flow analysis; Life cycle assessment.

Project description:Improved technologies are needed for sustainable management of sewage sludge (SS). The torrefaction (also known as biomass "roasting") is considered a pretreatment of SS before use in agriculture. However, it is not known whether the torrefaction has the potential to decrease heavy metals' (HMs) leachability and the SS toxicity. Thus, the aim of the study was to evaluate the influences of the SS torrefaction parameters (temperature and process time) on HM contents in biochar, HM leachability, and biochar toxicity, and compare them with raw SS. The experiments were designed in 18 combinations (six temperatures, 200, 220, 240, 260, 280, and 300 °C; and three process times-20, 40, 60 min). Standard tests were used to determine HMs content, leachability, and toxicity. Results indicated that the torrefaction did not increase (p < 0.05) the HM content in comparison to the raw SS. The leachability of Zn, Ni, Cu, Cr, and Mn from SS biochars was similar to raw SS. However, the degree of leachability varied significantly (p < 0.05) from as low as 0.1% for Cu to high as 16.7% for Cd. The leachability of Cd (<16.7%) and Pb (<11.9%) from biochars was higher than from raw SS (<6.1% and <2.4%, respectively). The leachability of Cd from SS biochar, in five torrefaction combinations, was higher than the threshold value for hazardous waste. It is recommended that site-specific decisions are made for torrefaction of SS with respect to its HM content, as the resulting biochar could be considered as hazardous waste, depending on the feedstock. Moreover, the biochar produced under the whole range of temperatures during 20 min retention time significantly (p < 0.05) increased the Daphnia magna Straus mobility inhibition by up to 100% in comparison to the biochar obtained during 40 and 60 min torrefaction. Taking into account the increased leachability of specific HMs and D. magna Straus mobility inhibition, biochar should be considered a potentially hazardous material. Future research should focus on biochar dosage as a fertilizer in relation to its toxicity. Additional research is warranted to focus on the optimization of SS torrefaction process parameters affecting the toxicity.

Project description:Waste is part of the agenda of the European Environment and Health Process and included among the topics of the Sixth Ministerial Conference on Environment and Health. Disposal and management of hazardous waste are worldwide challenges. We performed a systematic review to evaluate the evidence of the health impact of hazardous waste exposure, applying transparent and a priori defined methods. The following five steps, based on pre-defined systematic criteria, were applied. 1. Specify the research question, in terms of "Population-Exposure-Comparators-Outcomes" (PECO).Populationpeople living near hazardous waste sites; Exposure: exposure to hazardous waste; Comparators: all comparators; Outcomes: all diseases/health disorders. 2. Carry out the literature search, in Medline and EMBASE. 3. Select studies for inclusion: original epidemiological studies, published between 1999 and 2015, on populations residentially exposed to hazardous waste. 4. Assess the quality of selected studies, taking into account study design, exposure and outcome assessment, confounding control. 5. Rate the confidence in the body of evidence for each outcome taking into account the reliability of each study, the strength of the association and concordance of results.Fifty-seven papers of epidemiological investigations on the health status of populations living near hazardous waste sites were selected for the evidence evaluation. The association between 95 health outcomes (diseases and disorders) and residential exposure to hazardous waste sites was evaluated. Health effects of residential hazardous waste exposure, previously partially unrecognized, were highlighted. Sufficient evidence was found of association between exposure to oil industry waste that releases high concentrations of hydrogen sulphide and acute symptoms. The evidence of causal relationship with hazardous waste was defined as limited for: liver, bladder, breast and testis cancers, non-Hodgkin lymphoma, asthma, congenital anomalies overall and anomalies of the neural tube, urogenital, connective and musculoskeletal systems, low birth weight and pre-term birth; evidence was defined as inadequate for the other health outcomes. The results, although not conclusive, provide indications that more effective public health policies on hazardous waste management are urgently needed. International, national and local authorities should oppose and eliminate poor, outdated and illegal practices of waste disposal, including illegal transboundary trade, and increase support regulation and its enforcement.

Dataset Information

Hazardous Waste Management of Buffing Dust Collagen.

Publications

Hazardous Waste Management of Buffing Dust Collagen.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets