Dataset Information

Three-dimensional, printed water-filtration system for economical, on-site arsenic removal.

ABSTRACT: The threat of arsenic contamination to public health, particularly in developing countries, has become a serious problem. Millions of people in their daily lives are still highly dependent on groundwater containing high levels of arsenic, which causes excessive exposure to this toxic element, due to the high cost and lack of water-treatment infrastructures. Therefore, a technique for large-scale treatment of water in rural areas to remove arsenic is needed and should be low-cost, be easily customized, and not rely on electrical power. In this study, in an effort to fulfill those requirements, we introduce a three-dimensional (3D), printed water-filtration system for arsenic removal. Three-dimensional printing can provide a compact, customized filtration system that can fulfill the above-mentioned requirements and that can be made from plastic materials, which are abundant. Armed with the versatility of 3D printing, we were able to design the internal surface areas of filters, after which we modified the surfaces of the 3D, printed filters by using iron (III) oxide as an adsorbent for arsenite. We investigated the effects of the controlled surface area on the flow rate and the deposition of the adsorbent, which are directly related to the adsorption of arsenic. We conducted isotherm studies to quantify the adsorption of arsenic on our 3D, printed filtration system.

SUBMITTER: Kim K

PROVIDER: S-EPMC7182265 | biostudies-literature | 2020

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Three-dimensional, printed water-filtration system for economical, on-site arsenic removal.

Kim Kihoon K Ratri Monica Cahyaning MC Choe Giho G Nam Myeongyun M Cho Daehyoung D Shin Kwanwoo K

PloS one 20200424 4

The threat of arsenic contamination to public health, particularly in developing countries, has become a serious problem. Millions of people in their daily lives are still highly dependent on groundwater containing high levels of arsenic, which causes excessive exposure to this toxic element, due to the high cost and lack of water-treatment infrastructures. Therefore, a technique for large-scale treatment of water in rural areas to remove arsenic is needed and should be low-cost, be easily custo ...[more]

PMID: 32330139

Similar Datasets

Project description:White matter damage persists in hypoxic-ischemic newborns even when treated with hypothermia. We have previously shown that intraventricular delivery of human glial progenitors (GPs) at the neonatal stage is capable of replacing abnormal host glia and rescuing the lifespan of dysmyelinated mice. However, such transplantation in the human brain poses significant challenges as related to high-volume ventricles and long cell migration distances. These challenges can only be studied in large animal model systems. In this study, we developed a three dimensional (3D)-printed model of the ventricular system sized to a newborn pig to investigate the parameters that can maximize a global biodistribution of injected GPs within the ventricular system, while minimizing outflow to the subarachnoid space. Bioluminescent imaging and magnetic resonance imaging were used to image the biodistribution of luciferase-transduced GPs in simple fluid containers and a custom-designed, 3D-printed model of the piglet ventricular system. Seven independent variables were investigated. The results demonstrated that a low volume (0.1 mL) of cell suspension is essential to keep cells within the ventricular system. If higher volumes (1 mL) are needed, a very slow infusion speed (0.01 mL/min) is necessary. Real-time magnetic resonance imaging demonstrated that superparamagnetic iron oxide (SPIO) labeling significantly alters the rheological properties of the GP suspension, such that, even at high speeds and high volumes, the outflow to the subarachnoid space is reduced. Several other factors, including GP species (human vs. mouse), type of catheter tip (end hole vs. side hole), catheter length (0.3 vs. 7.62 m), and cell concentration, had less effect on the overall distribution of GPs. We conclude that the use of a 3D-printed phantom model represents a robust, reproducible, and cost-saving alternative to in vivo large animal studies for determining optimal injection parameters.

Dataset Information

Three-dimensional, printed water-filtration system for economical, on-site arsenic removal.

Publications

Three-dimensional, printed water-filtration system for economical, on-site arsenic removal.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets