Dataset Information

Mapping Occupational Hazards with a Multi-sensor Network in a Heavy-Vehicle Manufacturing Facility.

ABSTRACT: Due to their small size, low-power demands, and customizability, low-cost sensors can be deployed in collections that are spatially distributed in the environment, known as sensor networks. The literature contains examples of such networks in the ambient environment; this article describes the development and deployment of a 40-node multi-hazard network, constructed with low-cost sensors for particulate matter (SHARP GP2Y1010AU0F), carbon monoxide (Alphasense CO-B4), oxidizing gases (Alphasense OX-B421), and noise (developed in-house) in a heavy-vehicle manufacturing facility. Network nodes communicated wirelessly with a central database in order to record hazard measurements at 5-min intervals. Here, we report on the temporal and spatial measurements from the network, precision of network measurements, and accuracy of network measurements with respect to field reference instruments through 8 months of continuous deployment. During typical production periods, 1-h mean hazard levels ± standard deviation across all monitors for particulate matter (PM), carbon monoxide (CO), oxidizing gases (OX), and noise were 0.62 ± 0.2 mg m-3, 7 ± 2 ppm, 155 ± 58 ppb, and 82 ± 1 dBA, respectively. We observed clear diurnal and weekly temporal patterns for all hazards and daily, hazard-specific spatial patterns attributable to general manufacturing processes in the facility. Processes associated with the highest hazard levels were machining and welding (PM and noise), staging (CO), and manual and robotic welding (OX). Network sensors exhibited varying degrees of precision with 95% of measurements among three collocated nodes within 0.21 mg m-3 for PM, 0.4 ppm for CO, 9 ppb for OX, and 1 dBA for noise of each other. The median percent bias with reference to direct-reading instruments was 27%, 11%, 45%, and 1%, for PM, CO, OX, and noise, respectively. This study demonstrates the successful long-term deployment of a multi-hazard sensor network in an industrial manufacturing setting and illustrates the high temporal and spatial resolution of hazard data that sensor and monitor networks are capable of. We show that network-derived hazard measurements offer rich datasets to comprehensively assess occupational hazards. Our network sets the stage for the characterization of occupational exposures on the individual level with wireless sensor networks.

SUBMITTER: Zuidema C

PROVIDER: S-EPMC7182772 | biostudies-literature | 2019 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Mapping Occupational Hazards with a Multi-sensor Network in a Heavy-Vehicle Manufacturing Facility.

Zuidema Christopher C Sousan Sinan S Stebounova Larissa V LV Gray Alyson A Liu Xiaoxing X Tatum Marcus M Stroh Oliver O Thomas Geb G Peters Thomas T Koehler Kirsten K

Annals of work exposures and health 20190301 3

Due to their small size, low-power demands, and customizability, low-cost sensors can be deployed in collections that are spatially distributed in the environment, known as sensor networks. The literature contains examples of such networks in the ambient environment; this article describes the development and deployment of a 40-node multi-hazard network, constructed with low-cost sensors for particulate matter (SHARP GP2Y1010AU0F), carbon monoxide (Alphasense CO-B4), oxidizing gases (Alphasense ...[more]

PMID: 30715121

Similar Datasets

Project description:Objectives:To design a method that uses preliminary hazard mapping data to optimize the number and location of sensors within a network for a long-term assessment of occupational concentrations, while preserving temporal variability, accuracy, and precision of predicted hazards. Methods:Particle number concentrations (PNCs) and respirable mass concentrations (RMCs) were measured with direct-reading instruments in a large heavy-vehicle manufacturing facility at 80-82 locations during 7 mapping events, stratified by day and season. Using kriged hazard mapping, a statistical approach identified optimal orders for removing locations to capture temporal variability and high prediction precision of PNC and RMC concentrations. We compared optimal-removal, random-removal, and least-optimal-removal orders to bound prediction performance. Results:The temporal variability of PNC was found to be higher than RMC with low correlation between the two particulate metrics (ρ = 0.30). Optimal-removal orders resulted in more accurate PNC kriged estimates (root mean square error [RMSE] = 49.2) at sample locations compared with random-removal order (RMSE = 55.7). For estimates at locations having concentrations in the upper 10th percentile, the optimal-removal order preserved average estimated concentrations better than random- or least-optimal-removal orders (P < 0.01). However, estimated average concentrations using an optimal-removal were not statistically different than random-removal when averaged over the entire facility. No statistical difference was observed for optimal- and random-removal methods for RMCs that were less variable in time and space than PNCs. Conclusions:Optimized removal performed better than random-removal in preserving high temporal variability and accuracy of hazard map for PNC, but not for the more spatially homogeneous RMC. These results can be used to reduce the number of locations used in a network of static sensors for long-term monitoring of hazards in the workplace, without sacrificing prediction performance.

Project description:Peptide couplers (also known as amide bond-forming reagents or coupling reagents) are broadly used in organic chemical syntheses, especially in the pharmaceutical industry. Yet, occupational health hazards associated with this chemical class are largely unexplored, which is disconcerting given the intrinsic reactivity of these compounds. Several case studies involving occupational exposures reported adverse respiratory and dermal health effects, providing initial evidence of chemical sensitization. To address the paucity of toxicological data, a pharmaceutical cross-industry task force was formed to evaluate and assess the potential of these compounds to cause eye and dermal irritation as well as corrosivity and dermal sensitization. The goal of our work was to inform health and safety professionals as well as pharmaceutical and organic chemists of the occupational health hazards associated with this chemical class. To that end, 25 of the most commonly used peptide couplers and five hydrolysis products were selected for in vivo, in vitro, and in silico testing. Our findings confirmed that dermal sensitization is a concern for this chemical class with 21/25 peptide couplers testing positive for dermal sensitization and 15 of these being strong/extreme sensitizers. We also found that dermal corrosion and irritation (8/25) as well as eye irritation (9/25) were health hazards associated with peptide couplers and their hydrolysis products (4/5 were dermal irritants or corrosive and 4/5 were eye irritants). Resulting outcomes were synthesized to inform decision making in peptide coupler selection and enable data-driven hazard communication to workers. The latter includes harmonized hazard classifications, appropriate handling recommendations, and accurate safety data sheets, which support the industrial hygiene hierarchy of control strategies and risk assessment. Our study demonstrates the merits of an integrated, in vivo -in silico analysis, applied here to the skin sensitization endpoint using the Computer-Aided Discovery and REdesign (CADRE) and Derek Nexus programs. We show that experimental data can improve predictive models by filling existing data gaps while, concurrently, providing computational insights into key initiating events and elucidating the chemical structural features contributing to adverse health effects. This interactive, interdisciplinary approach is consistent with Green Chemistry principles that seek to improve the selection and design of less hazardous reagents in industrial processes and applications.

Dataset Information

Mapping Occupational Hazards with a Multi-sensor Network in a Heavy-Vehicle Manufacturing Facility.

Publications

Mapping Occupational Hazards with a Multi-sensor Network in a Heavy-Vehicle Manufacturing Facility.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets